Yer ve duvar karosu üretiminde deformasyon ve su emme kriterlerine etki eden parametrelerin incelenmesi
Investigation of parameters affecting deformation and water absorption criteria in floor and wall tile production
- Tez No: 720260
- Danışmanlar: PROF. DR. HAMZA KEMAL AKYILDIZ
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Seramik Mühendisliği, Mechanical Engineering, Ceramic Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2022
- Dil: Türkçe
- Üniversite: Yozgat Bozok Üniversitesi
- Enstitü: Lisansüstü Eğitim Enstitüsü
- Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 182
Özet
Yer ve duvar karosu üretim tesislerinde; üretim aşamaları, üretim de karşılaşılan deformasyon ve su emme problemleri deneysel verilerle anlatılmıştır. Tezin amacı, yer ve duvar karosu üretim yapan tesiste deformasyon ve su emme nedenlerini inceleyerek kalitesizliğin önüne geçmektir. Deformasyon karoda düzlemsel hatalar olup uygulama ve sonraki aşamalarda çok ciddi sorunlara neden olan istenmeyen bir durumdur. Su emme de karonun yararlı ömrünü azaltacak bir etmendir. Deneyler iki kısımdan oluşmaktadır. Birinci kısımda deformasyon problemlerinin nedenleri araştırılmıştır. Deformasyon konusunda; masse, sır ve engop etkileşimleri incelenmiş, hammadde kimyasal analizleri ve reçete analizleri yapılmıştır. Sonuçta masse ile sır ve engobun termal genleşme uyumunun önemi tespit edilmiştir. Feldspat ilavesi bünyenin termal genleşme katsayısını düşürdüğü, feldspatlar termal genleşmeyi etkilediğinden boyutsal olarak deformeyi de etkilediği deney çalışmalarında tespit edilmiştir. İkinci kısımda su emme deneyleri yapılmıştır. Su emme deneylerinde karo bünyesindeki gözeneğin ve ergitici hammaddelerin su emmeye etkisi araştırılmıştır. Sonuçta porlar hacmi ile su emmenin ters orantılı olduğu, ergitici hammaddenin su emmeyi düşürdüğü tespit edilmiştir. Fırınlama süresi arttıkça sinterleme (yani ısı ile taneciklerin katı olarak birbirleriyle kaynaşma işlemi) daha fazla olacağından porlar (granül taneleri arası boşluklar) arası mesafe pişirim süresi arttıkça azalmaktadır. Özetle; gözenekler azalmakta ve su emme değeri düşmektedir. Pres basıncının artması ile de karo bünyesi daha yoğun hale geleceğinden, yani taneler arası mesafe azalacağından su emme düşmektedir. Yapılan deneysel çalışmalarda, hacimsel yoğunluğun artması ile porların hacminin küçüldüğü tespit edilmiştir.
Özet (Çeviri)
In floor and wall tile production facilities; production stages, deformation and water absorption problems encountered in production are explained with experimental data. The aim of the thesis is to prevent poor quality by examining the causes of deformation and water absorption in the facility that produces floor and wall tiles. Deformation is planar faults in the tile and is an undesirable situation that causes very serious problems in the application and subsequent stages. Water absorption is also a factor that will reduce the useful life of the tile. The experiments consist of two parts. In the first part, the causes of deformation problems are investigated. On deformation; masse, glaze and engop interactions were examined, raw material chemical analyzes and recipe analyzes were made. As a result, the importance of thermal expansion compatibility of masse with glaze and engob was determined. It has been determined in the experimental studies that the addition of feldspar reduces the thermal expansion coefficient of the body, and since feldspars affect the thermal expansion, it also affects the dimensional deformation. In the second part, water absorption experiments were carried out. In the water absorption experiments, the effect of the porosity in the tile and the melting raw materials on the water absorption was investigated. As a result, it has been determined that the pore volume and water absorption are inversely proportional, and the melting raw material reduces the water absorption. As the firing time increases, the distance between the pores (the spaces between the granules) decreases as the firing time increases, since the sintering (that is, the process of fusing the particles with each other as a solid with heat) will be more. In summary; the pores are reduced and the water absorption value decreases. With the increase of the press pressure, the tile body will become more dense, that is, the distance between the grains will decrease, and the water absorption decreases. In the experimental studies, it was determined that the volume of the pores decreased with the increase in volumetric density.
Benzer Tezler
- Yer ve duvar karosu üretiminde ortak bünye kullanımı
Employment of a multipurpose tile body for both wall and floor tile production
MUSTAFA FAHRİ ÖZER
Yüksek Lisans
Türkçe
2004
Seramik MühendisliğiAnadolu ÜniversitesiSeramik Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. ALPAGUT KARA
- Ergitici olarak kullanılan farklı alkali kaynaklarının seramik duvar karosu bünyesindeki teknolojik özelliklere etkisinin incelenmesi
Investigation of the effects of different resources used as flux on the technological properties of ceramic wall tile bodies
MERİH ANIL EMİR
Yüksek Lisans
Türkçe
2020
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. CÜNEYT ARSLAN
- Türkiyede üretilen bazı seramik ürünlerin indüktif eşlemeli plazma kütle spektrometresi (Icp-Ms) ve X-ışını floresans spektrometresi (Xrf) kullanılarak elementel analizlerinin yapılması
Elemental analysis of some ceramics produced in Turkey by using inductively coupled plasma-mass spectrometer (Icp-Ms) and X-ray fluorescence (Xrf) spectrometer
ÜNAL ŞAHİNCİ
Yüksek Lisans
Türkçe
2018
Fizik ve Fizik MühendisliğiErciyes ÜniversitesiFizik Ana Bilim Dalı
PROF. DR. SEMA ÖZTÜRK YILDIRIM
- Enerji tüketimi ve emisyonların düşürülmesi amacıyla çimento üretiminde mineral katkıların kullanımının optimizasyonu
Optimization of the use of mineral additives in cement production for reduce to energy comsumption and emissions
MELİS TOKER
Yüksek Lisans
Türkçe
2013
Maden Mühendisliği ve Madencilikİstanbul Teknik ÜniversitesiMaden Mühendisliği Ana Bilim Dalı
PROF. DR. HASAN ERGİN
- Seramik karo üretiminde kullanılan dijital baskı mürekkeplerin farklı sıcaklıklardaki davranışlarının incelenmesi
Investigation of behavior at different temperatures of digital printing inks used in ceramic tile production
DİDEM ŞAHANKAYA
Yüksek Lisans
Türkçe
2022
KimyaManisa Celal Bayar ÜniversitesiKimya Ana Bilim Dalı
PROF. DR. YÜKSEL ABALI
DR. ÖĞR. ÜYESİ OSMAN ARSLAN