Geri Dön

Designing an efficient storage location assignment approach for through-flow warehouses

Akış tipi depolar için etkin bir depolama lokasyonu ataması yaklaşımı

  1. Tez No: 731418
  2. Yazar: FIRAT GÖRÜR
  3. Danışmanlar: DOÇ. DR. GÖNENÇ YÜCEL, PROF. DR. MUSTAFA NECATİ ARAS
  4. Tez Türü: Yüksek Lisans
  5. Konular: Endüstri ve Endüstri Mühendisliği, Industrial and Industrial Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2022
  8. Dil: İngilizce
  9. Üniversite: Boğaziçi Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Endüstri Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 90

Özet

Stok toplama ve yerleştirme için iki farklı toplama alanı bulunan depolarda sipariş toplama ve yerleştirme aktiviteleri analiz edilmiştir. İki toplama alanlı bu depolardaki toplam taşıma mesafesini optimize edecek şekilde stokların depolama lokasyonlarına atamasını gerçekleştiren bir yaklaşım; bu yaklaşım kapsamında bir model ve sezgisel çözüm algoritması geliştirilmiştir. Model ve algoritma için gerekli tüm data sanal olarak üretilmiştir. Depolama lokasyonu atama problemlerinin hesaplama karmaşıklığından dolayı, stokların lokasyonlarına yerleştirilmesi ve toplanması sayılarını baz alan bir amaç fonksiyonuna sahip yeni bir model tanımlanmıştır. Modelin amaç fonksiyonunda; gelen ürün toplama alanı ile depolama lokasyonları arasında kat edilen mesafe, giden ürün toplama alanı ile depolama lokasyonları arasında kat edilen mesafe ve depolama lokasyonları arasında kat edilen mesafe bilgisi üç bileşen olarak bulunmaktadır. Modelleme sonrasında sezgisel algoritma aracığıyla 42 test senaryosu için problem çözümlenmiştir. Çözümler incelendiğinde, önerilen yaklaşım ile toplam taşıma mesafesi bağlamında, özellikle stok toplayıcı ve yerleştirici birimlerinde kapasite koşulu bulunmayan test senaryolarında dikkat çekici iyileştirmeler tespit edilmiştir.

Özet (Çeviri)

Order placement and retrieval operations in a warehouse with separated incoming and outgoing storage handling areas are analyzed. An approach, which consists of a model and a heuristic algorithm, is devised in order to determine how stock keeping units could be assigned to the storage locations so that the total distance traveled is optimized. All necessary data for the model are generated. Because of the complexity of the problem, a new model with a reformulated objective function, which is derived from number of occurrences in the same SKUs entries and retrievals, is defined to be minimized instead of the SLAP itself. In the objective function; movements between storage handling area of the incoming SKUs and storage locations during the placement operations, movements between the storage handling area of outgoing SKUs and storage locations during the retrieval operations, and movements between the storage locations during the picking operations are included as three components. After modeling, the problem is solved by a heuristic algorithm. Computational results are obtained by 42 different scenarios. The results reveal that good improvements are obtained by the approach, especially when there is no capacity constraint for stock handlers.

Benzer Tezler

  1. Optimum design of helix ground heat exchangers for heat pump applications

    Isı pompası uygulamaları için helis tipi toprak ısı değiştiricilerinin optımum tasarımı

    BABAK DEHGHAN

    Yüksek Lisans

    İngilizce

    İngilizce

    2015

    Makine Mühendisliğiİstanbul Teknik Üniversitesi

    Enerji Bilim ve Teknoloji Ana Bilim Dalı

    PROF. DR. HACI OSMAN ALTUĞ ŞİŞMAN

  2. Dynamic data replication and distribution in database systems

    Veri tabanı sistemlerinde dinamik veri kopyalama ve dağıtımı

    SAADI HAMAD THALIJ ALLUHAIBI

    Doktora

    İngilizce

    İngilizce

    2019

    Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve KontrolYıldız Teknik Üniversitesi

    Bilgisayar Mühendisliği Ana Bilim Dalı

    Assoc. Prof. Dr. VELİ HAKKOYMAZ

  3. Bir dosya sistemi tasarımı ve gerçekleştirilmesi

    Designing and developing a filing system

    CEM ÖZDEMİR

  4. Nesnelerin interneti ekosisteminde iş modeli oluşturulması

    Designing business models for the internet of things ecosystem

    BİRGÜL KILIÇ

    Yüksek Lisans

    Türkçe

    Türkçe

    2020

    Mühendislik Bilimleriİstanbul Teknik Üniversitesi

    İşletme Mühendisliği Ana Bilim Dalı

    DOÇ. DR. NİHAN YILDIRIM

  5. Otomatik depolama ve boşaltma sistemleri tasarım parametreleri ve hızlı tüketim ürünleri sektöründe uygulanması

    Automatic storage and retrieval system design parameters and implementation of fast moving consumer goods sector

    YASİN EMRE BURAN

    Yüksek Lisans

    Türkçe

    Türkçe

    2019

    Endüstri ve Endüstri Mühendisliğiİstanbul Teknik Üniversitesi

    Endüstri Mühendisliği Ana Bilim Dalı

    DOÇ. DR. MURAT BASKAK