Değişken kesitli baraj-rezervuar etkileşim problemlerinin varyasyonel hibrid eleman metodu ile çözümü
Başlık çevirisi mevcut değil.
- Tez No: 75226
- Danışmanlar: PROF. DR. ERTAÇ ERGÜVEN
- Tez Türü: Yüksek Lisans
- Konular: İnşaat Mühendisliği, Civil Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 1998
- Dil: Türkçe
- Üniversite: İstanbul Teknik Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: İnşaat Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 51
Özet
ÖZET Elastik yapı ve bunu çevreleyen sıvı arasındaki etkileşim, deprem sırasında önemli etkiler oluşturduğundan yapının güvenliği açısından dikkatle incelenmesi gereken bir olgudur. Baraj-rezervuar etkileşim problemi bugüne kadar birçok teknik çalışmada ele alınmıştır. Çalışmaların sonucuna erişirken sonlu elemanlar yöntemi, sınır eleman yöntemi ayn-ayrı ve hatta aynı anda kullanılmıştır. Baraj tasarımında özellikle aktif sismik bölgeler için baraj yapı ve rezervuar arasındaki etkileşim hesaplarda önemli bir faktördür. Hidrodinamik basınç dağılımları sismik kuvvetlere maruz bırakılan barajlarda ilkin 1933 yılında Westergaard tarafından incelenmiştir. Zangar & Haefeli, Zienkiewicz & Nath, Chopra, Hanna & Humar hepsi bu dağılımın hesabında rijit bir cisim olarak barajı ele almışlardır. Çalışmalarda genelde sayısal teknikler kullanılırken kesin analitik çözümler suda titreşen basit elastik yapılar için kullanılmıştır. Bu çalışmada, değişken kesitli çubuk bir elemanın sıvı ile etkileşim problemi SONLU ELEMAN YÖNTEMİ kullanılmıştır. Araştırmada baraja yakın kısımlarda değişken derinlikte, belirli bir uzaklıktan sonra sabit derinlikte olan rezervuann baraj arkasında sonsuz uzunlukta olduğu e~'°* harmonik zorlanma problemi ele alınmış olup sonsuz uzunlukta sabit derinliğe sahip sistemin harmonik zorlanma haline ait problemin çözümü elde edilmiştir. Sonuçta baraj, ekseni boyunca değişken kesitli çubuk elemanlara ayrılarak sonlu elemanlar yöntemiyle incelenip rezervuara ait çözümlerde hız potansiyeli için rijit taban koşulu ve hidrodinamik basıncın sıfır olduğu serbest yüzey koşulunu sağlayan seri çözüm kullanılmıştır. Baraj-rezervuar etkileşim problemi bir enerji prensibine dayalı varyasyonel yöntem ile çözülmüştür. Bu yöntemde hız potansiyeli ile yapı üzerindeki düğüm noktalarının yer değiştirmeleri serbest değişken olarak seçilmiştir. Yapılan varsayımlar şöyledir:. Sıvı; sıkıştınlabilir, homojen ve vizkoz değildir:. Çubuk elemandaki yerdeğiştirmeler küçük kabul edilecektir. vu
Özet (Çeviri)
SUMMARY SOLVING DAM-RESERVOIR INTERACTION PROBLEM BY USING VARIATIONAL HYBRID ELEMENT METHOD Exact analytical solutions are derived for simple elastic structures vibrating in water. Linear acoustic and beam theories are used to treat several cases some of which have been studied by more approximate methods before. A hybrid element method which is based on a localized variational principle is demonstrated numerically or a beam-dam; its theoretical bases is then generalized for arbitrary two-dimensional elastic structure. Foundation compliance is not included. In the presence of earthquakes the interaction between an elastic structure and the surrounding fluid can be important in considering the safety of the structure. The 1964 Alaska earthquake caused the first large scale damage to thanks of modern design and initiated many investigations into the dynamic characteristics of flexible containers. In addition, the evoluation of both the digital computer and various assoiated numerical techniques has significantly enhanced solution capability. Several studies were carried out to investigate the dynamic interaction between the deformable walls of the thank and the liquid. An extensive literature has developed during the past 45 years on the subject of waves caused by vibrating thanks of heavy fluid. Part of this literature appeared in the 1950s and 1960s in connection with the sloshing problem for aircraft fuel tahnks. Several examples of this work, which was concerned primarily with calculating natural frequencies and modes rather than time-history responses to specified tankaccelerations, are given by Graham and Rodriges and Silverman and Abramson The secend part of this literature originated in 1949 with a paper by Jacobsen and has continued to the present time. The performance of ground-based liquid strorage tanks such as petroleum, LNG, LPG, nuclear containment vessels and so fourth during recent earthquakes demonstrates the need for a rebiable technique to assess their seismic safety. Early developments of seismic response theories of liquid strorage tanks considered the container to be rigid and focused attention on the dynamic response of the contained liquid. A common seismic design procedure is based on the mechanical model viuderived by Housner for tanks with rigid walls. In this approach, a mathematical model of the liquid-rigid tank system was used and the hydrodynamic effects were evaluated approximately as the sum of two components, viz. An impulsive part which representes the portion of the liquid which moves in unison with the tank and a convective component which represent the portion of the liquid sloshing in the tank. Epstien improved Housner's work and presented dersign curves for estimating the bending and overturning momonet induced by the hydrodynamic pressure, for cylindrical as well as rectangular rigid tanks. The following studies can be indicated as a sample on the dynamic characteristics of the liquid with rigid walls. In engineering problems involved fluid-structure interaction with sloshing, the fluid and sloshing behaviour is determined with a rigid wall assumption and than the structural response is obtained by imposing the dynamic pressure to the structural model. This approach generally yields concervative results since the rigit-wall forces are larger than the flexible wall forces. But an uncoupled analysis underedtimates the structural response if the natural frequencies of the coupled system are close to the exciation frequencies, which is often the case in the seismic analysis of liquid-filled tanks and nuclear reactor systems. The exact mathematical procedure for describing fluid oscillations in a moving container is extremely complex. Therefore, the following simplifying assumptions are generaly employed: 1. Nonviscous fluid, 2. Compressible fluid, 3. Small displacements, velocities and slopes, 4. Irrotational flow field, 5. Homogeneous fluid, The assumption of irrotational flow ensures the existence of a velocity potential, q> which must satisfy the equation c The liquid and the shell structure are two separate system that are coupled. Each system, acting alone, has an infinite number of modes of free vibration, If the coupled system is excited with some forcing frequency ©. The magnitude of the response will depend on the ratio of the forcing frequency ca and the natural frequencies of the copuled system. At least three different methods can be used in handling wetted structures: LX1. Dividing the whole fluid volume into finite elements, which produces a three dimensional mesh. In recent years, the finite element method has become widely accepted by the engineering professions as an extremely valuable method of analysis. Its application has enabled satisfactory solutions to be obtained for many problems which had hitherto been regarded as insoluble, and the amount of research effort currently being devoted to the finite element method ensures a rapidly widening field of application. The finite element method is extremely useful for modelling complicated structures and machines such as the aircraft and bridge. The Finite Element Methods is a powerful numerical technique that uses variational and interpolation methods modelling and solving boundary value problems. The method is also extremely useful for complicated devices and structures with unusual geometric shapes (e.g., trusses, frames, machines parts). The finite element is very systematic and modular. Hence the finite element method may easily be implemented on a digital computer to solve a wide range of practical vibration problems simply by changing the input to a computer program. The finite element method approximates a structure in two distinct ways. The first approximation made in finite element modeling is to divide the structure up into a number of small parts are called finite elements and the procedure of dividing up the structure is called discretization. Each element is usually very simple, such as a bar, beam, plate, which has an equation of motion that can easily be solved or approximated. Each element has andpoints called nodes, which connect it to the next element. The collection of finite elements and node is called a finite element mesh of finite element grid. 2. Dividing the whole fluid surface into boundary elements, such as direct, indirect or variational Boundary Element Method (BEM), which produces a two dimensional mesh. Another possibility is to use approximating functions that satisfy the governing equations in the domain but not the boundary conditions. These techniquesare called boundary methods and for a number of reasons they have developed slowly up to the present. The boundary Element Method is a technique which offers important advantages over“domain”type solutions, such as finite elements and finite differences. One of the most interesting features of the method is the much smaller systems of equations and considerable reduction in the data required to run a problem. In addition the numerical accuracy of boundary elements is generally greater than that of finite elements. These advantages are more marked in two and three-dimensionalproblems. The method is also well suited to problem solving with infinite domains such as those frequently occuring in soil mechanics, hydraulics, stress analysis etc. For which the classical domain methods are unsuitable. The term“Boundary Elements”originated within the Department of Civil Engineering at Southampton University. It is used to indicate the method whereby the external surface of a domain is divided into a series of elements over which the functions under consideration can vary in different ways, in much the same manner as in finite elements. This capability is important as, in the past, integral equation type formulations were generaly restricted to constant sources assumed to be concentrated at a series of points on the external surface of the body. 3. Representation of fluid behaviour by a series of generalized functions. Using the Finite Element Method, one can obtain a linear interaction problem for both linear the structure and the fluid which can be solved by standart methods. A great simplification can be introduced by the assumption of incompressibility of the fluid. In this case, the coupled system can be reduced to the structural mass matrix plus. The problem of dam-reservoir interaction has received considerable attention. The similar problem of an ocean structure excited by earthquakes has also been studied before. Liner elasticity and linear acoustics in water are frequently assumed for the frequency range typical of earthquakes. In additions, many existing studies assume, for simplicity, the ground to be rigid and its motion to be prescribed. In more recent studies the important effect of ground compliance has also been included to account for radiation damping; the required analysis often involves simplifications which are either valid only for a limited range of frequencies or result in expensive computations. In cases where ground compliance is ignored (i.e. rigid ground) available solutions are also approximate in varying degrees. Sometimes only the lowest few modes are included; this is probably very good for some practical purposes when the earthquake spectrum is narrow banded and the peak frequency is low. For earthquakes of short duration, it is desirable to have accurate information of the frequency response for as wide a range as possible before Fourier synthesis. The method of Finn and Varoğlu which is exact in principle, is to express the beam and water motions in terms of their respective eigen modes. Suitable matching conditions lead to infinite by infinite matrix for the expansion coefficients. As the matrix elements need to be computed numerically, the theory, strictly speaking, is semi-analytical. The numerical method of Finn and Varoğlu applies only to a reservoir of constant depth. In this study, we first report some exact solutions in series form whose expansion coefficients are obtained analytically. Therefore the final results involve only numerical XIsummation of infinite series. The analytical method is convenient only for the special case of a thin beam or column of uniform rigidity. We next describe a more general hybrid element method based on a localized variational principle. This method combines an analytical solution in most of the surrounding water with finite elements only in the structure and its neighbouring water where the dept is constant. In this study, finite element method is used in examining beam element-liquid interaction problem. Problems about harmonic motion of the reservoir that has infinite constant deep is solved. In solution of problem, beam element is examined by using finite element method and the series solution that is employing rigid base condition for velocity potential and free surface condition where the hydrodynamic pressure is zero for solution about reservoir. The dam-reservoir interaction problem is solved by variational method that is based an energy principle xn
Benzer Tezler
- Dam break induced flood analysis by soft computing techniques
Yumuşak hesaplama teknikleri ile baraj yıkılması kaynaklı taşkın analizi
HALİD AKDEMİR
Yüksek Lisans
İngilizce
2022
İnşaat Mühendisliğiİstanbul Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DOÇ. DR. CİHAN BAYINDIR
- Toprak ve kaya dolgu barajların elasto-plastik dinamik davranışı
Başlık çevirisi yok
ZEKİ ÖZCAN
Doktora
Türkçe
1998
İnşaat Mühendisliğiİstanbul Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. ZEKAİ CELEP
- Baraj inşaatı planlamasında LOB ve CPM tekniklerinin kıyaslanması
Comparison of LOB and CPM techniques in a dam construction planning
SHYHNAZAR GUMMANOV
Yüksek Lisans
Türkçe
2007
İnşaat MühendisliğiEge Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. ORHAN YÜKSEL
- An experimental study of shock wave/boundary layer interactions in supersonic inlets
Sesüstü hava alıklarında şok dalgası sınır tabakası etkileşiminin deneysel incelenmesi
SERDAR SEÇKİN
Yüksek Lisans
İngilizce
2014
Havacılık Mühendisliğiİstanbul Teknik ÜniversitesiUçak ve Uzay Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. KEMAL BÜLENT YÜCEİL
- Development of a decision support system for optimal instrumentation of concrete faced rockfill dams
Ön yüzü beton kaplı kaya dolgu barajların izleme sistemlerinin en uygun tasarımı için bir algoritma geliştirilmesi
ONUR ARI
Doktora
İngilizce
2016
İnşaat MühendisliğiOrta Doğu Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. ALİ MELİH YANMAZ