Three-position four-bar linkage mechanism synthesis, static balancing and optimization of automotive engine hood
Başlık çevirisi mevcut değil.
- Tez No: 758127
- Danışmanlar: DR. MENG-SANG CHEW
- Tez Türü: Yüksek Lisans
- Konular: Otomotiv Mühendisliği, Automotive Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2015
- Dil: İngilizce
- Üniversite: Lehigh University
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 108
Özet
Özet yok.
Özet (Çeviri)
Vehicles need to have regular maintenance and repair so that hoods need to be easy to opened and closed. With the addition of more women car owners, this requirement that automobile hoods requiring lower opening and closing efforts become even more important. This research looks into vehicle engine hood mechanisms that incorporate a pin go to assist in the opening of the hood. The design of such mechanisms as divided into two steps. The first is carried out using three position synthesis. In the second step, different types of springs such as extension, compression and torsion springs are applied and optimization procedures is used to determine the various location for the springs and the spring parameters to minimize the effort to raise the hood. A sensitivity analysis is also carried out on the best of the three spring types and configurations to determine its suitability for practical implementation
Benzer Tezler
- Çok amaçlı kremayer-pinyon mekanizmalarının kinematik sentez ve analizi
Kinematic synthesis and analysis of the rack and pinion multipurpose mechanism
AYLİN YENİLMEZ
- Design of a mechanical flight control systems for light aircraft
Hafif uçaklar için mekanik uçuş kontrol sistemi tasarımı
YUNUS AKMAN
Yüksek Lisans
İngilizce
2001
Havacılık MühendisliğiOrta Doğu Teknik ÜniversitesiHavacılık Mühendisliği Ana Bilim Dalı
PROF. DR. YAVUZ YAMAN
PROF. DR. ERES SÖYLEMEZ
- Elastik krank-biyel mekanizması titreşimlerin sonlu elemanlar yöntemiyle incelenmesi
Vibration analysis of cranck-connecting rod-slider mechanism by using finite element method
ERHAN DELİGÖZ
- Dikiş makinelerinde yeni bir iplik verici (horoz) mekanizması tasarımı
A new thread take-up mechanism design in sewing machines
ŞERİFE ŞAFAK
Yüksek Lisans
Türkçe
2009
Makine MühendisliğiSelçuk ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. ZİYA ŞAKA
- Yüklenici inşaat işletmeleri için proje özelliklerinin ve riskin dikkate alındığı finansal planlama modeli
A Financial planning model based on project characteristics and risk for contracting firms
ELÇİN TAŞ