Geri Dön

Tam dişsiz olguların implant ile rehabilitasyonunda farklı ölçü tekniklerinin hassasiyetlerinin değerlendirilmesi

Evaluation of the accuracy of different impression techniques in implant rehabilitation of edentulous cases

  1. Tez No: 761963
  2. Yazar: MEHMET HAKAN KÜLAHCI
  3. Danışmanlar: PROF. DR. GÜLÜMSER EVLİOĞLU
  4. Tez Türü: Doktora
  5. Konular: Diş Hekimliği, Dentistry
  6. Anahtar Kelimeler: ölçü teknikleri, dijital ölçü, implantüstü ölçü, hassasiyet, tam dişsizlik, impression techniques, digital impression, implant supported impression, accuracy, complete edentulism
  7. Yıl: 2022
  8. Dil: Türkçe
  9. Üniversite: İstanbul Üniversitesi
  10. Enstitü: Sağlık Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Protetik Diş Tedavisi Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 119

Özet

Protetik tedavinin uzun dönem başarısı ağız içi ortamın laboratuvara doğru şekilde aktarılması ile ilişkilidir. Ölçü doğruluğunu artırmak için farklı ölçü materyalleri ve teknikleri geliştirilmiş ve geliştirilmeye devam etmektedir. Günümüzde dijitalleşmenin artması ile birlikte ağız içi tarayıcılar implant destekli protezlerin ölçü alım işleminde klinik rutinleri arasına girmeye başlamıştır ancak tam dişsizlik durumunda etkinlikleri ile ilgili şüpheler devam etmektedir. Çalışmamızda tam dişsizlik durumunda konvansiyonel ve dijital ölçü tekniklerinin farklı parametlerde doğruluğunun karşılaştırılması amaçlanmıştır. Tam dişsizlik durumunun 6 adet implant ile rehabilitasyonunu taklit eden model üzerinden polivinil siloksan ölçü materyali kullanılarak snap-on tekniği, açık kaşık splintli teknik ve açık kaşık splintsiz teknikleri ile 10'ar adet ölçü alınmış ve alçı modelleri elde edilmiştir. Elde edilen alçı modeller laboratuvar tarayıcısı ve scan body'ler ile dijitalize edilerek STL (Standard Tessellation Language) verileri elde edilmiştir. Dijital ölçü tekniğinde ise ana model taranarak doğrudan 10 adet STL formatında verisi elde edilmiştir. Ana model yüksek hassasiyetli endüstriyel tarayıcı ile taranarak referans model elde edilmiş ve tersine mühendislik programı aracılığıyla STL görüntüleri çakıştırılarak sapma miktarları 2 ve 3 boyutlu olarak belirlenmiştir. 3 boyutlu sapmaların değerlendirmesi sonucunda açık kaşık splintli grup ve açık kaşık splintsiz grup arasında anlamlı fark bulunmazken, snap on ve dijital ölçüden daha iyi sonuç verdiği belirlenmiştir. 2 boyutlu sapmaların değerlendirilmesinde ise gruplar arasında anlamlı fark bulunmamıştır. Çalışmamızın sonucunda en hassas ölçünün açık kaşık splintli teknik ile elde edildiği, implantlar arası mesafe arttıkça 2 boyutlu sapma miktarlarının arttığı tespit edilmiştir.

Özet (Çeviri)

The long-term success of prosthetic treatment is related to the correct transfer of the oral environment to the laboratory. Different impression materials and techniques have been developed and continue to be developed to increase measurement accuracy. Today, with the increase in digitalization, intraoral scanners have started to be among the clinical routines in the impression taking process of implant supported prostheses, but doubts about their effectiveness in case of complete edentulism continue. In our study, it was aimed to compare the accuracy of conventional and digital impression techniques in different parameters in case of complete edentulism. Using polyvinyl siloxane impression material, 10 impressions were taken with snap-on technique, open tray splint technique and open tray splintless techniques on the model that imitates the rehabilitation of complete edentulous condition with 6 implants, and plaster models were obtained. STL data were obtained by digitizing the obtained plaster models with a laboratory scanner and scan bodies. In the digital impression technique, the main model was scanned and 10 STL format data were obtained directly. The high- precision industrial scanner reference model of the main model was obtained and the deviation amounts were determined in 2 and 3 dimensions by superimposition the STL images via reverse engineering program. As a result of the evaluation of 3-dimensional deviations, there was no significant difference between the group with open tray splint and the group open tray with out splint, but it was determined that it gave better results than snap on and digital impression. There was no significant difference between the groups in the evaluation of 2-dimensional deviations. As a result of our study, it was determined that the most sensitive measurement was obtained with the open tray splint technique, and the amount of 2-dimensional deviations increased as the distance between the implants increased.

Benzer Tezler

  1. Total dişsizlik olgularında bilateral balanslı oklüzyona protrüziv kondil yolu eğiminin etkisinin in vivo olarak değerlendirilmesi

    In vivo evaluation of the effect of protrusive condylar inclination on bilateral balanced occlusion in total edentulous cases

    TANER TÜRKAY

    Doktora

    Türkçe

    Türkçe

    2023

    Diş HekimliğiSelçuk Üniversitesi

    Protetik Diş Tedavisi Ana Bilim Dalı

    PROF. DR. İSA YÖNDEM

  2. İmplant üstü sabit protezlerde çiğneme performansının değerlendirilmesi

    Evaluation of chewing performance with fixed implant protheses

    SİBEL KAN

    Doktora

    Türkçe

    Türkçe

    2015

    Diş HekimliğiSüleyman Demirel Üniversitesi

    Protetik Diş Tedavisi Ana Bilim Dalı

    DOÇ. DR. SERHAT SÜHA TÜRKASLAN

  3. Tam dişsiz hastalarda implant destekli overdenture ve konvansiyonel tam protezlerin hasta beklentileri ve yaşam kalitesine etkisinin araştırılması

    Comparing the efficiency of mandibular implant- retained overdentures and conventional dentures among elderly edentulous pati̇ents: Satisfaction and quality of life

    İMRAN KOÇAK

    Diş Hekimliği Uzmanlık

    Türkçe

    Türkçe

    2017

    Diş HekimliğiOndokuz Mayıs Üniversitesi

    Protetik Diş Tedavisi Ana Bilim Dalı

    PROF. DR. GÖZLEM CEYLAN

  4. Üst çene tam dişsizlik olgularında uygulanan farklı sayı ve çaptaki implantların kemik üzerinde oluşturdukları streslerin üç boyutlu sonlu elemanlar stres analizi yöntemi ile karşılaştırılması

    Analyzing the strength rage occured on implant-supoorted removable prosthesis by using different number and diameter implants by using 3-dimensional finite element analysis program

    GİZEM DİMİLİLER

    Doktora

    Türkçe

    Türkçe

    2013

    Diş HekimliğiGazi Üniversitesi

    Ağız, Diş, Çene Hastalıkları ve Cerrahisi Ana Bilim Dalı

    PROF. DR. SEDAT ÇETİNER

  5. Alt çene tam dişsizlik olgularında implant üstüne farklı tekniklerle uygulanan bar tutuculu overdenture tasarımlarındaki kuvvet dağılımının sayısal yöntemlerle değerlendirilmesi

    Stress distribution evaluation of implant-supported overdenture–retaining bar designs with different techniques in mandibular edentulous cases with numerical methods

    GÖZDE YERLİOĞLU

    Doktora

    Türkçe

    Türkçe

    2015

    Diş HekimliğiEge Üniversitesi

    Protetik Diş Tedavisi Ana Bilim Dalı

    PROF. DR. TOMURCUK ÖVÜL KÜMBÜLOĞLU