Femur üzerindeki anatomik yapıların morfometrik olarak incelenmesi
Morphometric evaluation of anatomical structures on the femur
- Tez No: 779095
- Danışmanlar: DR. ÖĞR. ÜYESİ ÖZGE AL
- Tez Türü: Yüksek Lisans
- Konular: Anatomi, Anatomy
- Anahtar Kelimeler: Femur, Femur parametreleri, Fovea capitis femoris, Femur, Femur parameters, Fovea capitis femoris
- Yıl: 2023
- Dil: Türkçe
- Üniversite: Erciyes Üniversitesi
- Enstitü: Sağlık Bilimleri Enstitüsü
- Ana Bilim Dalı: Anatomi Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 62
Özet
FEMUR ÜZERİNDEKİ ANATOMİK YAPILARIN MORFOMETRİK OLARAK İNCELENMESİ Bahadır ARI Erciyes Üniversitesi, Sağlık Bilimleri Enstitüsü Anatomi Anabilim Dalı Yüksek Lisans Tezi, Ocak 2023 Danışman: Dr. Öğr. Üyesi Özge AL ÖZET Femur proksimalde kalça eklemine distalde ise diz eklemine katılması nedeniyle alt ekstremitenin hareketlerinde ve gövdeden alt ekstremiteye yük aktarımında önemli rol oynar. Kalça veya dizde dejeneratif ve inflamatuar hastalıklara sahip bireylere konservatif yaklaşımların yetersiz kaldığı durumlarda artroplastiler önerilmektedir. Fakat femur morfolojisi ve morfometrisi cinsiyete, yaşa ve ırka göre farklılıklar göstermektedir. Bu nedenle en uygun protezi üretmek için popülasyona özgü verilere ihtiyaç vardır. Bu çalışmada kalça ve diz artroplasti uygulamalarında eklem ve protez arasında uyumun sağlanmasına yönelik femurun proksimal ve distal morfometrik ve morfolojik özelliklerinin değerlendirilmesi amaçlandı. Çalışmamız, Erciyes Üniversitesi Tıp Fakültesi Anatomi Anabilim Dalı'nda bulunan 102 kuru femur (45 sağ ve 57 sol) üzerinde gerçekleştirildi. 12'si proksimal femurda, 6'sı distal femurda olmak üzere toplamda 18 morfometrik ölçüm kaliper kullanılarak ölçüldü. İnklinasyon açısı, Alsberg açısı, deklinasyon açısı, caput femoris ve fovea capitis femoris yüzey alanı parametreleri kemiklerin dijital parametreleri üzerinden ImageJ kullanılarak ölçüldü. Fovea capitis femoris'in morfolojik tiplendirilmesi yapıldı. İnklinasyon açısı, deklinasyon açısı, fovea capitis femoris transvers uzunluğu ve fovea capitis femoris yüzey alanı değerleri sağ ve sol tarafları arasında istatistiksel olarak anlamlı farklılık not edildi (p = 0.042, p = 0.001, p < 0.001, p = 0.020, sırasıyla). Elde edilen femur parametre değerlerinin, hastaya uygulanacak protezin üretiminde ve kalça veya dize uygulanacak implantın geometrik boyutlarının belirlenmesinde ve antropometrik çalışmalar için literatüre katkı sağlaması hedeflenmiştir.
Özet (Çeviri)
MORPHOMETRIC EVALUATION OF ANATOMICAL STRUCTURES ON THE FEMUR Bahadır ARI Erciyes University, Graduate School of Healthy Sciences Department of Anatomy M.Sc. Thesis, January 2023 Supervisor: Asst. Prof. Özge AL ABSTRACT Because the femur joins the hip joint proximally and the knee joint distally, it plays an essential role in lower-extremity movements and load transfer from the trunk to the lower extremity. Arthroplasty is recommended for individuals with degenerative and inflammatory diseases of the hip or knee when conservative approaches are insufficient. However, femur morphology and morphometry demonstrate differences according to gender, age, and race. Therefore, population-specific data are needed to produce the most appropriate prosthesis. This study aims to evaluate the proximal and distal morphometric and morphological features of the femur to provide consistency between the joint and prosthesis in hip and knee arthroplasty surgery. Our study was used in 102 dry femurs (45 right and 57 left) from Erciyes University Faculty of Medicine, Department of Anatomy. A total of 18 morphometric measurements, 12 in the proximal femur and 6 in the distal femur, were measured using a caliper. Neck Shaft Angle, Alsberg angle, Femoral Torsion Angle, caput femoris, and fovea capitis femoris surface area parameters were measured using ImageJ over digital images of the bones. Morphological typing of fovea capitis femoris was performed. Statistically significant differences were noted between the right and left sides of the inclination angle, declination angle, fovea capitis femoris transverse length, and fovea capitis femoris surface area values (p = 0.042, p = 0.001, p < 0.001, p = 0.020, respectively). We believe that the obtained femur parameter values will create a database for the production of the prosthesis to be applied to the patient, the determination of the geometric dimensions of the implant to be applied to the hip or knee, and for anthropological studies.
Benzer Tezler
- Yaban domuzunda articulatio genus'un anatomik ve morfometrik olarak incelenmesi
The anatomic and morphometric examination of stifle joint in wild boar
İSHAK DOĞAN
Yüksek Lisans
Türkçe
2020
AnatomiHatay Mustafa Kemal ÜniversitesiAnatomi Ana Bilim Dalı
PROF. DR. SEVİNÇ ATEŞ
- Doping olarak kullanılan Testosteron'un puberta dönemindeki erkek ve dişi ratların humerus ve femur üzerindeki morfometrik etkileri
Morphometric effects of Testosterone used as doping on humerus and femur of male and female rats in puberty
MEHMET ÖZDEMİR
Doktora
Türkçe
2010
Veteriner HekimliğiSelçuk ÜniversitesiAnatomi (Veterinerlik) Ana Bilim Dalı
PROF. DR. HAKAN YALÇIN
- Gelişimsel kalça displazisine neden olabilecek anatomik varyasyonların değerlendirilmesi
Başlık çevirisi yok
MENNAN ECE PİRZİRENLİ AYDIN
- Bıldırcında (Coturnix coturnix japonica) Ossa membri pelvini'nin makroanatomik ve subgros olarak incelenmesi
Macroanatomical and subgross investigation of Ossa membri pelvini in quail (Coturnix coturnix japonica)
AHMED IBRAHIM ELABBAS AHMED
Yüksek Lisans
Türkçe
2022
AnatomiAtatürk ÜniversitesiAnatomi (Veterinerlik) Ana Bilim Dalı
PROF. DR. HÜLYA BALKAYA
- Kalça eklemi stabilizasyonunda görevli anatomik yapılarda, mekanoreseptörlerin ve nöral yapıların gümüşleme yöntemi ile dağılımının gösterilmesi
Evaluation of the distribution of mechanoreceptors and neural body in anatomical structures stabilizing the hip joint using silver impregnation stain
BAHAR TEKİN
Yüksek Lisans
Türkçe
2017
Anatomiİstanbul Medipol ÜniversitesiAnatomi Ana Bilim Dalı
PROF. DR. ALPER ATASEVER