Geri Dön

Blok kodlarla 3 boyutlu nesne oluşturmanın uzamsal ve bilgi işlemsel düşünme becerilerine etkisi

The effect of creating 3d objects with block codes on spatial and computational thinking skills

  1. Tez No: 779183
  2. Yazar: MEHMET KÜÇÜK
  3. Danışmanlar: PROF. DR. MUHAMMET DEMİRBİLEK, DR. ÖĞR. ÜYESİ TARIK TALAN
  4. Tez Türü: Yüksek Lisans
  5. Konular: Eğitim ve Öğretim, Education and Training
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2022
  8. Dil: Türkçe
  9. Üniversite: Süleyman Demirel Üniversitesi
  10. Enstitü: Eğitim Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Bilgisayar ve Öğretim Teknolojileri Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 76

Özet

Son yüzyılda teknolojinin gelişiminin önceki yüzyıllara göre çok daha hızlı ilerlediği ve birçok alanı etkilediği ifade edilebilir. İnsanların teknolojiyi belli bir amaca yönelik kullanabilmesi için yaşadığı çağın becerilerine sahip olması gerekmektedir. Günümüzde çağa uyum sağlayabilmek için bilgi işlemsel düşünme ve uzamsal düşünme becerilerinin kazanımları önemlidir (Grover, 2018; Yıldız, 2009). İlgili alanyazın incelendiğinde bilgi işlemsel düşünme ile uzamsal düşünme becerilerinin aynı uygulamayla kazanımı üzerine yapılan çalışma sayısının oldukça sınırlı olduğu tespit edilmiştir. Bu araştırmada blok kodlama ile 3 boyutlu model oluşturma etkinliklerinin öğrencilerin uzamsal düşünme ve bilgi işlemsel düşünme becerilerine etkisi incelenmiştir. Dolayısıyla bu araştırma ön-test – son-test kontrol gruplu deneysel desen temel alınarak tasarlanan nicel bir araştırmadır. Araştırmanın çalışma grubunu, 2020-2021 eğitim-öğretim yılı 2. yarıyılında Konya'da Milli Eğitim Bakanlığına bağlı Konya Şehir Kolejinde öğrenim gören 5. sınıf öğrencileri oluşturmaktadır. Deney ve kontrol grupları oluşturulurken seçkisiz atama yöntemi kullanılmış ve iki şube (23 öğrenci) kontrol, üç şube (43 öğrenci) ise deney grubu olarak atanmıştır. Araştırma Bilişim Teknolojileri ve Yazılım dersinde üç haftalık bir süreci kapsamaktadır. Bu süreçte deney grubunda tinkercad.com platformunda hazırlanmış olan etkinlikler uygulanırken, kontrol grubunda ise mevcut müfredata uygun olan konular işlenmiştir. Araştırma verileri“Bilgi İşlemsel Düşünme Beceri Düzeyleri Ölçeği”ve“Uzamsal Düşünme Testi”ölçekleri kullanılarak temin edilmiştir. Verilerin analizinde betimsel istatistikler ve bağımsız örneklem t testi kullanılmıştır. Çalışma sonucunda deney ve kontrol gruplarının bilgi işlemsel düşünme beceri düzeyleri ölçeğinin son-test (¯χ=66,59, ¯χ=64,90) puanları arasında anlamlı farklılık tespit edilememiştir. Yine deney ve kontrol gruplarının uzamsal düşünme testinin son-test (¯χ=9,53, ¯χ=8,43) puanları arasında anlamlı farklılık tespit edilememiştir. Sonuç olarak çalışmada, tinkercad.com sitesinde blok kodlar yardımıyla 3 boyutlu nesne oluşturma etkinliklerinin, öğrencilerin bilgi işlemsel düşünme ve uzamsal düşünme becerilerinin gelişimine istatistiksel olarak anlamlı bir katkı sağlamadığı sonucuna ulaşılmıştır.

Özet (Çeviri)

It can be stated that the development of technology in the last century has progressed much faster than in previous centuries and has affected many areas. In order for people to use technology for a specific purpose, they need to have the skills of the age they live in. Today, it is important to acquire computational thinking and spatial thinking skills in order to adapt to the era (Grover, 2018; Yıldız, 2009). When therelated literature is examined, it has been determined that the number of studies on the acquisition of computational thinking and spatial thinking skills with the same application is quite limited. The purpose of this research was to investigate the effects of block coding and 3D model building activities on middle school students' spatial thinking and computational thinking skills were examined. Therefore, the current study is a quantitative research designed on the basis of a quasi-experimental design with pre-test-post-test control group. The study group of the research consists of 5th grade students studying at Konya City College affiliated to the Ministry of National Education in Konya in the 2nd semester of the 2020-2021 academic year. While creating the experimental and control groups, two branches (23 students) were assigned as the control group and three branches (43 students) as the experimental group by using the random assignment method. The research covers a three-week process in the information technologies and software course. In this process, while the activities prepared on the tinkercad.com platform were applied in the experimental group, the subjects suitable for the current curriculum were studied in the control group. The research data were obtained by using the“Computer Thinking Skill Levels Scale”and the“Spatial Thinking Test”scales. Descriptive statistics and independent sample t-test were used in the analysis of the data. As a result of the study, no significant difference was found between the post-test (¯χ=66,59, ¯χ=64,90) scores of the computational thinking skill levels scale of the experimental and control groups. It was also concluded that there was no significant difference between the post-test (¯χ=9,53, ¯χ=8,43) scores of the experimental and control groups in the spatial thinking test. As a result, it was concluded in the study that 3D object creation activities with the help of block codes on the tinkercad.com site did not make a statistically significant contribution to the development of students' computational thinking and spatial thinking skills.

Benzer Tezler

  1. Delikli turbo kod tasarımı

    Punctured turbo code design

    KENAN AKSOY

    Yüksek Lisans

    Türkçe

    Türkçe

    2002

    Elektrik ve Elektronik Mühendisliğiİstanbul Teknik Üniversitesi

    Elektronik ve Haberleşme Mühendisliği Ana Bilim Dalı

    PROF. DR. ÜMİT AYGÖLÜ

  2. Mechanics of nanomaterials consisted of random networks

    Rastgele ağ yapılı nano malzemelerin mekaniği

    MESUT KIRCA

    Doktora

    İngilizce

    İngilizce

    2013

    Makine Mühendisliğiİstanbul Teknik Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    PROF. DR. ATA MUGAN

    YRD. DOÇ. DR. ALBERT C. TO

  3. Farklı irrigasyon aktivasyon yöntemlerinin biyofilm kaldırma etkinliğinin değerlendirilmesi

    Evaluation of the effectiveness of different irrigation activation methods on biofilm removal

    ZEYNELABİDİN ŞİMŞEKYILMAZ

    Diş Hekimliği Uzmanlık

    Türkçe

    Türkçe

    2021

    Diş HekimliğiGaziantep Üniversitesi

    Endodonti Ana Bilim Dalı

    DOÇ. DR. UĞUR AYDIN

  4. Performance of 5G codes over a noisy channel

    Gürültülü bir kanal üzerindeki 5G kodların performansı

    MOHAMED A YOUSSEF SANFAZ

    Yüksek Lisans

    İngilizce

    İngilizce

    2022

    İletişim Bilimleriİstanbul Teknik Üniversitesi

    İletişim Sistemleri Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ MUSTAFA HELVACI

  5. Quantum stabilizer codes

    Kuantum sabıtleyen kodlar

    REZA DASTBASTEH

    Yüksek Lisans

    İngilizce

    İngilizce

    2017

    MatematikSabancı Üniversitesi

    Matematik Ana Bilim Dalı

    Prof. Dr. CEM GÜNERİ