Plastik enjeksiyonla üretilen ABS ve cam elyaf takviyeli PA66 kompozit levhaların boyutsal değişimine soğutma ortam ve sıcaklıkları etkisinin incelenmesi
Effect of cooling environment and temperature on dimensional change of ABS and glass fiber reinforced PA66 composite sheets fabricated by plastic injection molding
- Tez No: 792238
- Danışmanlar: PROF. DR. HÜSEYİN UZUN
- Tez Türü: Yüksek Lisans
- Konular: Metalurji Mühendisliği, Metallurgical Engineering
- Anahtar Kelimeler: Plastik enjeksiyon kalıplama, ABS levha, %30 cam elyaf takviyeli PA66 kompozit levha, boyutsal değişim, soğutma ortam ve sıcaklık etkisi, çekme testi, sertlik, Plastic injection molding, ABS sheet, 30% glass fiber reinforced PA66 composite sheet, dimensional change of the molded product, cooling environment and temperature, tensile test, hardness
- Yıl: 2023
- Dil: Türkçe
- Üniversite: Sakarya Uygulamalı Bilimler Üniversitesi
- Enstitü: Lisansüstü Eğitim Enstitüsü
- Ana Bilim Dalı: Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Metalurji ve Malzeme Mühendisliği Bilim Dalı
- Sayfa Sayısı: 112
Özet
Plastik enjeksiyon kalıplama, ısıtılarak ergitilmiş plastik esaslı malzemelerin bir kalıp içerisine hızlıca enjekte edilerek şekillendirilmesi ve soğutularak kalıptan çıkarılmasını içeren bir imalat yöntemidir. Bu yöntemde parça soğutulma süreci, yöntemin önemli bir aşamasıdır. Kalıplanmış ürün ısısının %90'ı, kalıp içerisinde belirli bir soğutma süresince bekleme yoluyla ve %10'u ise kalıp dışındaki soğutma ortamlarında kaybolur. Bu nedenle kalıp dışındaki soğutma ortam sıcaklıklarının kalıplanmış ürünün boyutsal değişimine ne kadar bir oranda etkiye sahip olabileceği merak konusu olmuştur. Bu çalışmanın amacı, plastik enjeksiyon kalıplama yöntemiyle üretilen ABS ve %30 cam elyaf takviyeli PA66 kompozit levhaların boyutsal değişimine, soğutma ortamının etkisini incelemek ve uygun soğutma ortam sıcaklığını belirlemektir. Bu amaç doğrultusunda enjeksiyonla kalıplanan levhalar, 13°C'lik su, 18°C'lik hava ve 80°C'lik fırın olmak üzere üç farklı ortam ve sıcaklıklarda, 10 gün süreyle bekletilerek levhaların boyutsal değişim değerleri ölçülmüştür. Ayrıca üç farklı ortam ve sıcaklıklarda bekletilen levhaların sertlik değerleri ölçülmüş ve çekme deneyleri yapılmıştır. Optik mikroskop yardımıyla levhaların çekme deneyi sonucu kopan numune yüzeyleri incelenmiştir. Elde edilen sonuçlara göre ABS levhaların 18°C'lik hava, 80°C'lik fırın ve 13°C'lik su ortam sıcaklıklarında yaklaşık %1 oranında boyutsal bir değişim tespit edilirken, %30 cam elyaf takviyeli PA66 kompozit levhaların 13°C'lik su ortam sıcaklığında yaklaşık %18 oranında, 18°C hava ve 80°C'lik fırın ortam sıcaklıklarında ise yaklaşık %1 oranında boyutsal bir değişimi tespit edilmiştir. Üç farklı soğutma ortam ve sıcaklıklarının, ABS ve %30 cam elyaf takviyeli PA66 kompozit levhalarında belirgin bir sertlik değişimine etki etmediği görülmüştür. Levhaların soğutma ortam ve sıcaklığı değiştikçe, çekme mukavemetinin değiştiği fakat birim şekil değişiminin ise aynı kaldığı belirlenmiştir. Soğutma ortam ve sıcaklığı değiştikçe, levhaların süneklik ve gevreklik davranışları da değişmektedir. ABS ve %30 cam elyaf takviyeli PA66 kompozit levhaların plastik enjeksiyon işlemi sonrası, 18°C'lik hava ortamı ve sıcaklığında soğutulması, optimum değer olarak tespit edilmiştir.
Özet (Çeviri)
Plastic injection molding is a manufacturing method to obtain molded products by injecting plastic-based materials molten by heat into a mold, and then cooling and solidifying them. The cooling of the parts produced by this method is an important stage of the process. 90% of the molded part heat is lost in the mold during a certain cooling time and 10% is lost in the cooling environments outside the mold. For this reason, it has been a matter of curiosity how much of an effect the cooling environment and temperatures of outside the mold can have on the dimensional change of the molded product. The aim of this study is to examine the effect of cooling environment and temperatures on the dimensional change of ABS and 30% glass fiber reinforced PA66 composite sheets produced by plastic injection molding and to determine the appropriate cooling environment and temperature. For this purpose, the dimensional change values of the injection molded sheets in three different the cooling environment and temperatures of 13°C water, 18°C air and 80°C air conditioning furnace were measured by keeping for 10 days. In addition, the hardness values of the sheets kept at three different the cooling environment and temperatures were measured and tensile tests were carried out. The broken surfaces of the tensile sample were examined by an optical microscope. According to the results, a dimensional change ~1% of the injection molded ABS sheets was determined at the 13°C water, 18°C air and 80°C furnace ambient temperatures. On the other hand, although a dimensional change of ~18% of 30% glass fiber reinforced PA66 composite sheets was determined at 13°C water of the cooling environment and temperatures, a dimensional change of ~1% was observed at the 18°C air and 80°C furnace. According to the results of the hardness values of the sheets, it was determined that there was no significant change in the three different the cooling environment and temperatures of both the ABS and the composite sheets. It was determined that as the cooling environment and temperature of the sheets changed, the tensile strength changed but the strain value of the tensile sample remained the same. As the cooling environment and temperature change, the ductility and brittleness behaviours of the sheets also change. After the plastic injection process of ABS and 30% glass fiber reinforced PA66 composite sheets, cooling at 18°C air environment and temperature was determined as the optimum value.
Benzer Tezler
- Biyo-katkılı cam elyaf takviyeli PP ve ABS polimerlerden üretilen plastik ürünlerin tasarım, analiz, imalat ve deneysel süreçlerinin incelenmesi
Investigation of the design, analysis, manufacturing and experimental processes of plastic products manufactured from bio-added glass fiber reinforced PP and ABS polymers
HALİT KARASUNGUR
Yüksek Lisans
Türkçe
2024
Polimer Bilim ve TeknolojisiKocaeli ÜniversitesiPolimer Bilim ve Teknolojisi Ana Bilim Dalı
PROF. DR. HASAN ÖKTEM
- Plastik malzeme tasarımı ve uygulamaları
Plastic materials design and practices
BAYRAM KARAMAN
Yüksek Lisans
Türkçe
2002
Makine MühendisliğiErciyes ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. SEDAT ÖZDEN
- Experimental investigation of laser parameters in molded interconnect devices manufacturing via laser direct structuring
Lazerle doğrudan yapılandırma yoluyla kalıplanmış ara bağlantı cihazlarının üretiminde lazer parametrelerinin deneysel incelenmesi
CANSU GİZEM AKAGÜNDÜZ
Yüksek Lisans
İngilizce
2023
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DOÇ. DR. EMRECAN SÖYLEMEZ
- Plastik enjeksiyon kalıplama metodu ile üretilen plastik parçalarda birleşme izlerinin mekanik ve kozmetik özelliklerinin iyileştirilmesi
Improving mechanical and cosmetic properties of plastic injection molded plastic products with weld line
LEVENT SARAÇ
Yüksek Lisans
Türkçe
2014
Makine MühendisliğiGebze Yüksek Teknoloji EnstitüsüMakine Mühendisliği Ana Bilim Dalı
DOÇ. DR. BABÜR ÖZÇELİK
- Plastik enjeksiyon kalıpçılığında kalıp içi ve eriyik sıcaklıklarının mekanik ve boyutsal özellere etkisi
Effect on the mechanical and dimensional properties of mould cavity and melt temperatures in plastic injection moulding
VEDAT EVREN DURSUN
Yüksek Lisans
Türkçe
2010
Makine MühendisliğiGebze Yüksek Teknoloji EnstitüsüMakine Mühendisliği Ana Bilim Dalı
DOÇ. DR. BABÜR ÖZÇELİK