Geri Dön

Yeni tip fosfazen temelli katot malzemelerin sentezi ve lityum sülfür bataryalarda özelliklerinin incelenmesi

Synthesis of new types of phosphazene-based cathodes and investigation of their properties in lithium sulfur batteries

  1. Tez No: 797362
  2. Yazar: SEDAT KÜÇÜKKÖYLÜ
  3. Danışmanlar: PROF. DR. SERKAN YEŞİLOT
  4. Tez Türü: Doktora
  5. Konular: Kimya, Chemistry
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2023
  8. Dil: Türkçe
  9. Üniversite: Gebze Teknik Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Kimya Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 147

Özet

Sülfürün doğal bolluğu, düşük toksisitesi ve 2567 Wh/kg 'lık yüksek teorik enerji yoğunluğundan dolayı Li-S piller yeni nesil lityum piller arasında en umut vaat eden adaylardan biri olarak görülmektedir. Bu tez kapsamında, lityum sülfür pillerde katot malzeme olarak kullanılabilecek polifosfazen temelli akrilik gruplar taşıyan polimerlerden ilk aşamada polibis(2-akrilamidoetoksi) fosfazen (3) ve polibis(1,3-diakrilamido-2-propanoksi) fosfazen (4) sentezlendi. İkinci aşamada polifosfazen temelli etilen glikol içeren ve akrilik gruplar taşıyan polifosfazen temelli poli((2-akrilamidoetoksi)-r-(metoksietoksietoksi)) fosfazen (5) ve poli((1,3-diakrilamido-2-propanoksi)-r-(metoksietoksietoksi)) fosfazen (6) polimerleri sentezlendi. Sentezlenen (3), (4), (5) ve (6) polimerler sülfür ile vulkanizasyon yöntemi kullanılarak elektroaktif (7), (8), (9) ve (10) polimerleri hazırlandı. Tüm polimerlerin karakterizasyonu uygun teknikler kullanılarak gerçekleştirildi. (7), (8), (9) ve (10) polimerlerinin elektrokimyasal performansları iki aşamada değerlendirildi. İlk aşamada alev geciktirici özellik gösterebilecek polifosfazen temelli (9) ve (10) polimerlerinin elektrokimyasal ölçümleri %50 sülfür içerikli (9) polimerinin C/5 akım yoğunluğundaki ilk deşarj kapasitesi 1205 mAh/g 'lık bir değeri işaret ederken 200 çevrim sonunda yaklaşık 400 mAh/g 'lık bir deşaj kapasitesi ile bu aşamadaki en umut vaat eden kapasiteleri sergiledi. İkinci aşamada ise etilen glikol içeren polifosfazen temelli (7) ve (8) polimerlerinin elektrokimyasal ölçümleri %50 etilen glikol içerikli (7) polimeri ilk deşarj kapasitesi 1296 mAh/g ve 105 çevrim sonunda 745 mAh/g 'lık kapasite ile ikinci aşamadaki en stabil sonuçları sergiledi.

Özet (Çeviri)

Li-S batteries are seen as one of the most promising candidates among the new generation lithium batteries due to the natural abundance of sulfur, low toxicity and high theoretical energy density of 2567 Wh/kg. Within the scope of this thesis, in the first step, polybis(2-acrylamidoethoxy) phosphazene (3) and polybis(1,3-diacrylamido-2-propanoxy) phosphazene (4) were synthesized from polymers containing acrylic groups polyphosphazene-based that can be used as cathode materials in lithium sulfide batteries. In the second stage, containing ethylene glycol and carrying acrylic groups polyphosphazene-based, poly((2-acrylamidoethoxy)-r-(methoxyethoxyethoxy)) phosphazene (5) and poly((1,3-diacrilamido-2-propanoxy)-r-(methoxyethoxyethoxy))phosphazene (6) polymers were synthesized. Electroactive polymers (7), (8), (9) and (10) were prepared from the synthesized polymers (3), (4), (5) and (6) by using the vulcanization method. The characterization of all polymers was carried out using appropriate techniques. Electrochemical performances of (7), (8), (9) and (10) polymers were evaluated in two stages. Electrochemical measurements of polyphosphazene-based (9) and (10) polymers, which may show flame retardant properties in the first stage, indicate a value of 1205 mAh/g at the C/5 current density of the 50% sulfur-containing polymer (9), while at the end of 200 cycles With a discharge capacity of about 400 mAh/g, it demonstrated the most promising capacities at this stage. In the second stage, the electrochemical measurements of the polyphosphazene-based (7) and (8) polymers containing ethylene glycol, the first discharge capacity of the 50% ethylene glycol-containing (7) polymer was 1296 mAh/g and at the end of 105 cycles, a capacity of 745 mAh/g. showed the most stable results in the second phase.

Benzer Tezler

  1. Yeni nesil polifosfazenler ve potansiyel uygulama alanları

    The novel polyphosphazines and the potential application areas

    SÜMEYRA YOLDAŞ KILIÇ

    Doktora

    Türkçe

    Türkçe

    2024

    KimyaGebze Teknik Üniversitesi

    Kimya Ana Bilim Dalı

    PROF. DR. GÖNÜL YENİLMEZ ÇİFTÇİ

  2. Yeni tip fosfazen bileşiklerinin sentezi ve kiral özelliklerinin incelenmesi

    Synthesis of new type chiral phosphazene compounds and their properties

    SERKAN YEŞİLOT

    Doktora

    Türkçe

    Türkçe

    2003

    KimyaGebze Yüksek Teknoloji Enstitüsü

    Kimya Ana Bilim Dalı

    PROF. DR. ADEM KILIÇ

  3. Suda çözünür yeni tip fosfazen türevlerinin sentezi ve özelliklerinin incelenmesi

    Synthesis and investigating the properties of new types water soluble phosphazene derivatives

    ELİF ÖZCAN

    Doktora

    Türkçe

    Türkçe

    2020

    KimyaGebze Teknik Üniversitesi

    Kimya Ana Bilim Dalı

    PROF. DR. AYLİN USLU

  4. Bir ve iki kiral merkezli siklofosfazen bileşiklerinin sentezi ve kiral konfigürasyonlarının incelenmesi

    Synthesis of cyclotriphosphazene derivatives containing one and two equivalent centres of chirality and investigation of their chiral configurations

    HÜSNÜYE ARDIÇ

    Yüksek Lisans

    Türkçe

    Türkçe

    2009

    KimyaGebze Yüksek Teknoloji Enstitüsü

    Kimya Ana Bilim Dalı

    DOÇ. DR. SERKAN YEŞİLOT

  5. Mono-substitüe NH-grubu içeren siklotrifosfazenlerden siklofosfazen dimerlerinin eldesi

    Obtaining dimers of the cyclophosphazenes from mono-substituted amine containing cyclophosphazenes

    AYŞEN ORHAN ERKOVAN

    Yüksek Lisans

    Türkçe

    Türkçe

    2008

    KimyaGebze Yüksek Teknoloji Enstitüsü

    Kimya Ana Bilim Dalı

    DOÇ. DR. SERAP BEŞLİ