Üç farklı resiprokal hareketli nikel titanyum eğe sisteminin dinamik döngüsel yorgunluk dirençlerinin karşılaştırılması
Comparison of cyclic fatigue resistance of THREE different reciprocating nickel titanium file systems
- Tez No: 803397
- Danışmanlar: PROF. DR. ALPER KUŞTARCI
- Tez Türü: Diş Hekimliği Uzmanlık
- Konular: Diş Hekimliği, Dentistry
- Anahtar Kelimeler: T-Endo Must, One RECI, WaveOne Gold, döngüsel yorgunluk dayanımı, resiprokasyon, Dental aygıtlar, Dental eğeler, Metal yorgunluğu, Nikel titanyum, T-Endo Must, One RECI, WaveOne Gold, cyclic fatigue resistance, reciprocation, Dental instruments, Dental files, Metal fatique, Nickel titanium
- Yıl: 2023
- Dil: Türkçe
- Üniversite: Akdeniz Üniversitesi
- Enstitü: Diş Hekimliği Fakültesi
- Ana Bilim Dalı: Endodonti Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Üç Farklı Resiprokal Hareketli Nikel Titanyum Eğe Sisteminin Döngüsel Yorgunluk Dirençlerinin Karşılaştırılması Bu çalışmanın amacı ısıl işlem görmüş üç farklı resiprokal hareketli NiTi kanal eğesinin döngüsel yorgunluk direncinin farklı koşullar altında değerlendirilmesidir. Toplamda 3 farklı eğe sisteminden 90 adet NiTi kanal eğesi kullanıldı (n=30). Grup 1'de (n=30) her kanal eğesi için 3 üst çene büyük azı dişin meziobukkal kök kanalı prepare edildikten ve sterilizasyon işlemi uygulandıktan sonra dinamik döngüsel yorgunluk testi yapıldı. Grup 2'de (n=30) her kanal eğesi toplamda 15 dakika NaOCl irrigasyon solüsyonunda bekletildikten ve sterilizasyon işlemi uygulandıktan sonra dinamik döngüsel yorgunluk testi yapıldı. Grup 3 (n=30) kontrol grubu olarak oluşturuldu ve eğeler üzerine herhangi bir işlem uygulanmadan dinamik döngüsel yorgunluk testi yapıldı. Verilerin normal dağılıma uyup uymadıkları Shapiro-Wilk testi ile varyans homojenliği de Levene testi ile değerlendirildi. Verilerin analizi TwoWay ANOVA testi ile, grup içi karşılaştırmalar Bonferroni testi ile yapıldı. Grup 1'de kırılmaya kadar geçen süre değerlendirildiğinde, T-Endo Must eğe sistemi WaveOne Gold eğe sistemi benzer sonuç gösterirken (p>0,05), One RECI eğe sisteminden daha uzun sürede kırıldı (p<0,05). One RECI ve WaveOne Gold eğe sistemleri benzer sonuçlar gösterdi (p>0,05). Grup 2'de sonuçlar değerlendirildiğinde T-Endo Must ve WaveOne Gold eğe sistemleri benzer sonuçlar gösterirken (p>0,05), One RECI eğe sistemi diğer iki eğe sistemine göre daha kısa sürede kırıldı (p<0,05). Kontrol grubunda T-Endo Must eğe sistemi diğer iki eğe sisteminden daha uzun süre kırılma dayanımı gösterirken (p<0,05), One RECI ve WaveOne Gold eğe sistemleri için kırılma süreleri benzerdi (p>0,05). Kırık parça uzunluğu değerlendirildiğinde, Grup 2'de T-Endo Must eğe sistemi diğer iki sisteme göre anlamlı derecede daha uzun bulundu (p<0,05).
Özet (Çeviri)
Comparison of Cyclic Fatigue Resistance of Three Different Reciprocating Nickel Titanium File Systems Aim: The aim of this study was to evaluate the cyclic fatigue resistance of three different heat-treated reciprocally moving NiTi files under different conditions. Matherial & Methods: Three different file systems were used to prepare the root canals. In Group 1 (n=30), dynamic cyclic fatigue (DCF) test was performed after the preparation of mesiobuccal root canal of 3 maxillary molars and sterilization procedure. In Group 2 (n=30), DCF test was performed after each canal file was kept in 3% sodium hypochlorite (NaOCl) solution for 15 minutes and sterilization was applied. Group 3 (n=30) was the control group and DCF test was performed without any procedure on the files. The Shapiro-Wilk test was used to evaluate the normallity and Levene test was used to evaluate the homogeneity of variance. Statistical analysis was made using the Two-Way ANOVA test. For within-group comparisons Bonferroni test was applied. Results: When the time required to fracture (TrF) were evaluated in the Group 1, the T-Endo Must file system showed similar results with the WaveOne Gold file system (p>0.05). The TrF for T-Endo Must file was longer than the One RECI file system (p<0.05). One RECI and WaveOne Gold file systems showed similar results (p>0.05). When the TrF were evaluated in the Group 2, T-Endo Must and WaveOne Gold file systems showed similar results (p>0.05), however, the One RECI file system showed significantly shorter TrF than the other two file systems (p<0.05). In the control group, the T-Endo Must file system showed significantly longer TrF than the other two file systems (p<0.05). The TrF of One RECI and WaveOne Gold file system were similar (p>0.05). The length of broken file fragment of T-Endo Must was significantly longer than other two file systems in Group 2 (p<0.05).
Benzer Tezler
- Farklı teknolojiler kullanılarak üretilmiş farklı çalışma prensibine sahip güncel nikel-titanyum esaslı tek eğe döner alet sistemlerinin şekillendirme etkinliklerinin karşılaştırılmalı olarak incelenmesi
Comparative investigation of shaping abilities of novel ni-ti single-file systems with different working principles produced with different technologies
UĞUR AKSOY
- Resiprokal hareket yapan dört farklı nikel titanyum eğe sisteminin sterilizasyona bağlı döngüsel yorgunluğunun karşılaştırmalı olarak değerlendirilmesi
A comparative evaluation of the sterilization-based cyclic fatigue of four different nickel titanium file system with reciprocal movements
BAYRAM ÇELİKEL
Diş Hekimliği Uzmanlık
Türkçe
2020
Diş HekimliğiFırat ÜniversitesiEndodonti Ana Bilim Dalı
DR. ÖĞR. ÜYESİ FARUK ÖZTEKİN
- Üç farklı kalsiyum silikat içerikli materyalin farklı irrigasyon solüsyonlarında dentine bağlanma dayanımlarının değerlendirilmesi
Evaluation of the dentin bond strength of three different calcium silicate-containing materials in different irrigation solutions
NUR SENA SALUK ÇATIK
Diş Hekimliği Uzmanlık
Türkçe
2026
Diş HekimliğiPamukkale ÜniversitesiEndodonti Ana Bilim Dalı
PROF. DR. İHSAN FURKAN ERTUĞRUL
- Üç farklı tek eğe sistemiyle yapılan kök kanal şekillendirilmesi sonucunda dentinde oluşan mikroçatlakların taramalı elektron mikroskobuyla (SEM) incelenmesi
Examination of microfractures occurring in dentin with scanning electron microscopy (SEM) as a result of root canal shaping with 3 different single file systems
YİĞİTCAN CANDANER
Diş Hekimliği Uzmanlık
Türkçe
2019
Diş HekimliğiMarmara ÜniversitesiEndodonti Ana Bilim Dalı
PROF. DR. HESNA SAZAK ÖVEÇOĞLU
- Semptomatik ı̇rreversibl pulpitisli dişlerde manuel enstrumantasyon, nikel titanyum rotasyon ve resiprokal hareketle çalışan sistemler ile şekillendirme sonrası postoperatif ağrının karşılaştırılması
Comparison of postoperative pain following root canal shaping with manual instrumentation, nickel-titanium rotary, and reciprocating systems in teeth with symptomatic irreversible pulpitis
İREM DENİZ
Diş Hekimliği Uzmanlık
Türkçe
2025
Diş HekimliğiEge ÜniversitesiEndodonti Ana Bilim Dalı
DOÇ. DR. GÖZDE KANDEMİR DEMİRCİ