Beton dolgulu öksetik kompozitlerin mekanik özelliklerinin nümerik olarak belirlenmesi
Numerical determination of mechanical properties of concrete-filled auxetic composites
- Tez No: 814828
- Danışmanlar: DR. ÖĞR. ÜYESİ SÜLEYMAN NAZİF ORHAN
- Tez Türü: Yüksek Lisans
- Konular: İnşaat Mühendisliği, Civil Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2023
- Dil: Türkçe
- Üniversite: Erzurum Teknik Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: İnşaat Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Mekanik Bilim Dalı
- Sayfa Sayısı: 109
Özet
Bu çalışma iki bölümden oluşmaktadır. İlk bölümde, rölatif yoğunluğu sabit tutulan altısı öksetik (re-entrant, arrowhead, yeni arrowhead, lozenge grid, formed from square grid ve star honeycomb) üçü geleneksel (honeycomb, isogrid ve rectangle grid) kafes yapı betonla doldurularak dokuz adet kompozit yapı elde edilmiştir. Bu kompozit yapıların basınç altındaki davranışı sayısal modeller oluşturularak incelenmiştir. Bu sayısal analizlerde kompozitlerde kullanılan kafes yapıların Poisson oranlarının ve direngenliklerinin kompozit yapıların davranışlarını nasıl etkilediği araştırılmıştır. En yüksek dayanım ve enerji yutma kapasitesine sahip olan yapının beton dolgulu rectangle grid olduğu saptanmıştır. İkinci bölümde ise en yüksek dayanım ve enerji yutma kapasitesine sahip olan beton dolgulu birer öksetik ve geleneksel kafes yapı seçilmiştir. Öksetik kafes için re-entrant, geleneksel kafes için rectangle grid yapısı kullanılmıştır. Bu kompozit yapıların içerisinde bulunan kafeslerin birim hücre kalınlıkları ve boyutları üzerine bir parametrik çalışma yapılmış ve yapıların dayanım ve enerji yutma kapasiteleri karşılaştırılmıştır. Bu iki kompozitte kullanılan kafeslerin birim hücre kalınlıkları arttıkça, beton dolgulu re-entrant kafesin beton dolgulu rectangle grid kafese göre çok daha yüksek dayanım ve enerji yutma kapasitesi sergilediği görülmüştür. Bu iki kompozitte kullanılan kafeslerin birim hücre boyutu arttıldığında ise her iki kompozit yapının dayanımlarının düştüğü belirlenmiştir. Yapılan tüm çalışmalar değerlendirildiğinde, beton dolgulu uygun birim hücre kalınlığına ve boyutuna sahip re-entrant kafes yapının, beton dolgulu rectangle grid kafes yapısıdan daha iyi mekanik davranış gösterdiği tespit edilmiştir.
Özet (Çeviri)
This study consists of two parts. In the first part, nine composite structures were obtained by filling concrete into six auxetic (re-entrant, arrowhead, new arrowhead, lozenge grid, formed from square grid and star honeycomb) and three conventional (honeycomb, isogrid and rectangle grid) lattice structures with constant relative density. The behavior of these composite structures under compression was investigated by creating numerical models. Numerical analysis were conducted to examine the effects of the Poisson's ratios and stiffnesses of the lattice structures used in the composites on the behavior of the composite structures. It was determined that the structure with the highest strength and energy absorption capacity was the concrete-filled rectangle grid. In the second part, the models with the highest strength and energy absorption capacity are selected as one each for concrete filled auxetic and conventional lattice structures. Re-entrant is considered for the auxetic lattice, while the rectangular grid structure is used for the conventional lattice. A parametric study was performed on the unit cell thicknesses and sizes of the lattices in these composite structures and their strength and energy absorption capacities were compared. It was observed that as the unit cell thickness of the lattices used in these two composites increased, the concrete-filled re-entrant lattice exhibited much higher strength and energy absorption capacity than the concrete-filled rectangle grid lattice. As the unit cell size of the lattices used in these two composites increased, it was revealed that the strengths of both composite structures decreased. When all the studies are evaluated, it is determined that concrete-filled re-entrant structure showed better mechanical behavior than concrete-filled rectangle grid structure at an appropriate lattice unit cell thickness and size.
Benzer Tezler
- Öksetik tübüler yapıların mekanik özelliklerinin incelenmesi
Investigation of the mechanical properties of auxetic tubular structures
KEMAL SOLAK
Yüksek Lisans
Türkçe
2023
11111Erzurum Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ SÜLEYMAN NAZİF ORHAN
- Beton dolgulu çelik kolonların bulonlu alın levha kiriş birleşimlerinin çevrimsel davranışına berkitme levhalarının etkisi
The influence of rib stiffeners on cyclic behavior of bolted end-plate connections of concrete-filled steel columns
ARYAN AZIMI
Yüksek Lisans
Türkçe
2024
İnşaat Mühendisliğiİstanbul Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DOÇ. DR. KADİR ÖZAKGÜL
- Beton dolgulu çelik kutu kolonlar ve dolu gövdeli çelik I kirislerden oluşan çerçevelerin yapı davranış katsayısının (R) irdelenmesi
Evaluating of structural behavior factors (R) of frames composed of steel I beams and concrete filled composite steel tube columns
ÇAĞRI AYDIN
Yüksek Lisans
Türkçe
2008
İnşaat MühendisliğiYıldız Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. A. ZAFER ÖZTÜRK
- Finite element and soft computing modeling of axial load carrying capacity of concrete filled composite short columns
Beton dolgulu kompozit kısa kolonların eksenel yük taşıma kapasitesinin sonlu elemanlar ve esnek hesaplama yöntemi kullanılarak modellenmesi
AYŞEGÜL ERDOĞAN
Doktora
İngilizce
2020
İnşaat MühendisliğiGaziantep Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. ESRA METE GÜNEYİSİ
- Finite element analysis of axial behavior of concrete-filled steel tubular columns
Beton dolgulu çelik tüp kolonlarda eksenel davranışın sonlu elemanlar yöntemi ile analizi
ROUNA HAMI
Yüksek Lisans
İngilizce
2025
İnşaat MühendisliğiGaziantep Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. ESRA METE GÜNEYİSİ
DR. ÖĞR. ÜYESİ AYŞEGÜL ERDOĞAN