Simule edilmiş gastrik asitin estetik restoratif CAD/CAM materyallerinin sertlik ve bükülme direncine etkisi
Effect of simulated gastric acid on aesthetical restorative CAD-CAM materials' microhardness andflexural strength
- Tez No: 839021
- Danışmanlar: DOÇ. DR. GÜLSÜM SAYIN ÖZEL
- Tez Türü: Doktora
- Konular: Diş Hekimliği, Dentistry
- Anahtar Kelimeler: CAD/CAM, Dental porselen, Dental restorasyon, Dental stres analizi, Gastrik asit, Mikrosertlik, CAD/CAM, Dental porcelain, Dental restoration, Dental stress analysis, Gastric acid, Microhardness
- Yıl: 2023
- Dil: Türkçe
- Üniversite: İstanbul Medipol Üniversitesi
- Enstitü: Sağlık Bilimleri Enstitüsü
- Ana Bilim Dalı: Protetik Diş Tedavisi Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Çalışmamızın amacı gastrik asitin estetik restoratif CAD-CAM materyallerinin bükülme dayanımı ve sertlik üzerindeki etkisini in-vitro olarak incelemektir. Çalışmada beş farklı CAD/CAM seramik materyal (VITA Enamic®, VITA Mark II®, IPS e.max® CAD, Superfect Zir®) kullanıldı. Her bir seramik materyalden 24 adet olmak üzere toplamda 96 adet 14x4x1 boyutlarında örnek oluşturuldu. Her bir grupta 12 örnek ayrılarak kontrol grupları oluşturuldu. Çalışma grubundaki örnekler 37oC'de 5 mL mide asidinde 96 saat boyunca bekletildi. Tüm seramik materyallerin sertlik değerleri ve bükülme dayanımları mide asidinde bekletilmeden önce ve sonra ölçülerek birbirleriyle karşılaştırıldı. Mide asidinde bekletilmeden önce ve sonra sertlik değerleri açısından gruplar arasındaki fark anlamlıydı (Her biri için p<0,001). Asit öncesi ve asit sonrası sertlik değerine göre sıralaması en yüksekten en düşüğe doğru Superfect Zir®, IPS e.max® CAD, Vita Mark II® ve Vita Enamic® şeklinde sıralandı. Gruplar arasında asit öncesi ve sonrası bükülme dayanımı ortalamaları açısından istatistiksel olarak anlamlıydı (Her biri için p<0,001). Asit öncesi ve asit sonrası bükülme dayanımlarına göre sıralaması en yüksekten en düşüğe doğru Superfect Zir®, IPS e.max® CAD, Vita Enamic®, Vita Mark II® şeklinde sıralandı. Gruplar arasında asit öncesine göre sonrası sertlik ortalamalarında görülen düşüş miktarları anlamlıydı (p<0,001). Gruplar arasında asit öncesine göre sonrası bükülme dayanımı ortalamalarında görülen düşüş miktarları açısından istatistiksel olarak anlamlı bir farklılık bulunamadı (p=0,063). CAD/CAM seramik materyallerinin mide asidine maruz kalmasıyla eğilme ve bükülme dayanımı özellikleri etkilenmektedir. Fakat zirkonyum ile güçlendirilmiş restoratif materyaller hem sertlik hem de bükülme dayanımı açısından aside en dayanıklı materyallerdir.
Özet (Çeviri)
The aim of our study was to in vitro investigation the effect of gastric acid on the flexural strength and microhardness of aesthetic restorative CAD-CAM materials. Five different CAD/CAM ceramic materials (VITA Enamic®, VITA Mark II®, IPS e.max® CAD, Superfect Zir®) were used in the study. A total of 96 specimens (24 specimens of each ceramic material) with dimensions of 14x4x1 were prepared. In each group, 12 samples were used as control groups. The samples in the study group were kept in 5 mL stomach acid at 37 degrees for 96 hours. Hardness values and flexural strength of all ceramic materials were measured before and after exposure to gastric acid and compared with each other. Pre- and post-exposure to gastric acid, the differences in hardness values among the groups were significant (p<0.001 for each). Based on hardness value pre- and post-exposure to gastric acid, the ranking from highest to lowest was as follows: Superfect Zir®, IPS e.max® CAD, Vita Mark II®, and Vita Enamic®. Statistically significant differences were observed among the groups in terms of flexural strength averages pre- and post-exposure to gastric acid (p<0.001 for each). Based on flexural strength value pre- and post-exposure to gastric acid, the ranking from highest to lowest was as follows: Superfect Zir®, IPS e.max® CAD, Vita Enamic®, and Vita Mark II®. The decreases in hardness averages pre- and post-exposure to gastric acid were significant among the groups (p<0.001). However, no significant difference was found in terms of flexural strength (p=0.063). The hardness and flexural strength properties of the CAD/CAM ceramic materials used in the study are influenced by exposure to gastric acid. However, zirconium-reinforced restorative materials are the most resistant materials to acid in terms of both hardness and flexural strength.
Benzer Tezler
- Simüle edilmiş gastrik asitin estetik restoratif CAD-CAM materyallerinin optik ve yüzey özelliklerine etkisi
Effect of simulated gastric acid on optical and surfaceproperties of aestheti̇c restorative CAD-CAM materials
GÖKÇE NAZ CÖMERT
Doktora
Türkçe
2023
Diş Hekimliğiİstanbul Medipol ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
PROF. DR. BEBEK SERRA OĞUZ AHMET
- Farklı içerikli diş macunlarının monolitik zirkonyanın optik özelliklerine etkisinin değerlendirilmesi
Evaluation of the effect of toothpastes with different contentson the optical properties of monolithic zirconia
AYŞE KARDELEN YILMAZ
Diş Hekimliği Uzmanlık
Türkçe
2022
Diş HekimliğiBolu Abant İzzet Baysal ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
DOÇ. DR. KÜBRA DEĞİRMENCİ
- Ellajik asitle yüklenmiş kitosan kaplı aljinat mikro-hidrojellerinin elektrospreyleme tekniği ile üretimi, karakterizasyonu ve in vitro sindirim modelinde değerlendirilmesi
The production of ellagic acid loaded chitosan-coated alginate micro-hydrogels by electrospraying technique: Characterization and evaluation by in vitro digestion model
HATİCE RUMEYSA ORDU
Yüksek Lisans
Türkçe
2021
Gıda MühendisliğiYıldız Teknik ÜniversitesiGıda Mühendisliği Ana Bilim Dalı
DOÇ. DR. AYŞE KARADAĞ
- Farklı gıdalardan izole edilen mayaların probiyotik özelliklerinin değerlendirilmesi ve fonksiyonel gıda geliştirilmesi
Evaluation of probiotic properties of yeasts isolated from different foods and development of functional foods
EDA KILIÇ KANAK
Doktora
Türkçe
2024
Gıda MühendisliğiSakarya ÜniversitesiGıda Mühendisliği Ana Bilim Dalı
PROF. DR. SUZAN ÖZTÜRK YILMAZ
- Encapsulation of phenolic extract of pollen in chitosan coated liposomes and in-vitro bioaccesibility studies
Fenoliklerce zengin polen ekstartlarının kitosan kaplı lipozomlar ile enkapsulasyonu ve biyoyararlılık calismalari
İLAYDA HIZIR KADI
Yüksek Lisans
İngilizce
2019
Gıda Mühendisliğiİstanbul Teknik ÜniversitesiGıda Mühendisliği Ana Bilim Dalı
PROF. DR. BERAAT ÖZÇELİK