Binaya entegreli fotovoltaik uygulamaların tasarımına etki eden parametrelerin deneysel analizi
Experimental analysis of parameters affecting the design of building integrated photovoltaic applications
- Tez No: 845500
- Danışmanlar: PROF. DR. MEHMET AZMİ AKTACİR
- Tez Türü: Doktora
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2024
- Dil: Türkçe
- Üniversite: Harran Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 162
Özet
Günümüzde atmosfere salınımı yapılan toplam CO2 emisyonunun neredeyse %40'ının binalar tarafından tüketilen enerji yüzünden olduğu düşünüldüğünde küresel ısınmaya karşı binalar üzerinden alınabilecek tedbirlerin önemi açıktır. Bu yüzden neredeyse sıfır enerjili binalar (NSEB) kavramı ön plana çıkmaktadır. Binaların kendi enerjilerini üretebilmeleri için Bina Entegreli Fotovoltaik Termal (BIPV/T) sistemleri kullanılmaktadır. Fakat binaların BIPV/T sistemleri için gerekli olan cephe ve çatı alanları kısıtlıdır. Bu yüzden çalışmada Türkiye Şanlıurfa meteoroloji koşullarında BIPV/T sistemlerinin verimlerinin arttırılmasına yönelik olarak deneyler yapılmıştır. Bu tezde çalışmanın getirdiği yenilik olarak güney cephesine yerleştirilen aynı üretim potansiyeline sahip bifacial (çift yüzeyli) ve monofacial (tek yüzeyli) paneller farklı hava akımı hızları ve farklı hava boşluğu mesafeleri ile kış dönemi ve yaz döneminde denenmiştir. Ayrıca, yaz döneminde iç ortamın klimalı olduğu binalarda BIPV/T sisteminin uygulanması düşünülerek, aynı konfigürasyonlar iç ortamın soğutulmuş olduğu şekilde yapılmıştır. Çalışmanın getirdiği yeniliklerden bir diğeri, bifacial panelin arkasındaki duvar yüzeyine reflektif yüzey yerleştirilerek, bifacial panelin elektriksel enerji veriminin arttırılmasıdır. Bu durum PVsyst analizi ile ispatlanmıştır. Ayrıca, çatı ve doğu cephelerine BIPV sistemi olarak aynı potansiyele sahip monofacial paneller yerleştirilerek üç cephenin yıl boyunca karşılaştırılması sonucunda, Şanlıurfa şartlarında yıllık en iyi elektrik enerjisi üretiminin çatıda olduğu bulunmuştur. Güney cephesindeki her iki panel de yüksek hava akımında, en kısa hava boşluğu mesafesinde maksimum ısıl enerji verimi sağlamıştır. Ayrıca Şanlıurfa'da yaz dönemi şartlarında BIPV/T sistemleri kullanılarak iç ortam sıcaklığı 50 °C'ye çıkarılarak gıda kurutması için kabin tipi kurutucuların uygun olduğu görülmüştür. Kış dönemi şartlarında ise ortam ısıtması için binanın ısıl yüküne ciddi anlamda destek olabileceği ve iç ortam sıcaklığını, dış ortam sıcaklığına göre 12 °C ile 15 °C arasında yükselttiği bulunmuştur. Bulunan panel ve iç ortam sıcaklık sonuçları Comsol HAD (Hesaplamalı Akışkanlar Dinamiği) analizi ile doğrulanmıştır. Bifacial panelin duvar ile panel arasındaki hava boşluğu mesafesi arttıkça elektriksel enerji veriminin arttığı bulunmuştur. Kışın yapılan deneylerde elektriksel güç üretim fazlalığında en az %8.33, en fazla %12.73 oranında bifacial panelin monofacial panele göre tüm konfigürasyonlarda üstünlüğü bulunmuştur. Yaz döneminde yapılan deneyde, bifacial panelin aynı şartlar altında monofacial panele göre %18.19'a varan fazla elektriksel güç ürettiği bulunmuştur. Yaz döneminde iç ortamın klima ile soğutulması sonucunda panellerin sıcaklığının azaltılmasıyla daha yüksek elektriksel güç üretimi sağlanmıştır. Bunun yanında cam-cam yapılı bifacial panelin elektriksel verim açısından sıcaklığa daha dayanıklı olduğu görülmüştür. Her iki sezonda da, panellerin en hızlı hava akımında ve duvar ile panel arasındaki hava mesafesi en uzakken, elektriksel performanslarının en iyi olduğu bulunmuştur. Bifacial panel kullanılan BIPV/T sisteminde, ısıtma sezonunda en kısa hava boşluğu mesafesinde, diğer mevsimlerde ise en uzun hava boşluğu mesafesinde kullanılması, yıl boyunca bina için en yüksek enerji verimini sağlayabilir.
Özet (Çeviri)
The importance of taking measures against global warming through buildings becomes evident when considering that nearly 40% of the total CO2 emissions released into the atmosphere today are attributed to the energy consumption of buildings. Therefore, the concept of Nearly Zero Energy Buildings (NZEB) comes to the forefront. Buildings use Building-Integrated Photovoltaic Thermal (BIPV/T) systems to generate their own energy. However, buildings face limitations in terms of the facade and roof areas required for BIPV/T systems. Therefore, experiments were conducted in the study to enhance the efficiency of BIPV/T systems under the meteorological conditions of Şanlıurfa, Turkey. In this thesis, as an innovative aspect of the study, bifacial (double-sided) and monofacial (single-sided) panels with the same production potential were installed on the south facade and tested during the winter and summer seasons with varying air flow velocities and different air gap distances. In addition, considering the application of the BIPV/T system in buildings where the indoor environment is air-conditioned during the summer, the same configurations were implemented with the indoor environment being cooled. Another innovation introduced by the study is the placement of a reflective surface on the wall behind the bifacial panel, aiming to enhance the electrical energy efficiency of the bifacial panel. This situation was substantiated through PVsyst analysis. Furthermore, through the comparison of the year-round performance of monofacial panels with the same potential installed as a BIPV system on the roof and east facades, it was determined that the best annual electricity production in Şanlıurfa conditions occurs on the roof. Both panels on the south facade have provided maximum thermal energy efficiency at high air flow rates and the shortest air gap distance. Additionally, it was observed that using BIPV/T systems in Şanlıurfa during summer conditions allows raising the indoor temperature to 50 °C, making it suitable for cabinet-type dryers for food drying. In winter conditions, it has been found that the BIPV/T system can provide significant support to the building's thermal load for space heating and elevate the indoor temperature by 12 °C to 15 °C compared to the outside temperature. The results of the panel and indoor temperature were validated through Comsol CFD (Computational Fluid Dynamics) analysis. It was found that as the air gap distance between the bifacial panel and the wall increases, the electrical energy efficiency increases. In experiments conducted during winter, the bifacial panel exhibited superiority over the monofacial panel in all configurations, with an electrical power generation surplus ranging from at least 8.33% to a maximum of 12.73%. In the summer experiments, it was found that the bifacial panel produced an electrical power surplus compared to the monofacial panel, ranging up to 18.19% under the same conditions. The cooling of panels through air conditioning of the indoor environment during summer resulted in a higher electrical power generation by reducing the panels temperature. In addition, it was observed that the glass-glass constructed bifacial panel is more resilient to temperature in terms of electrical efficiency. In both seasons, it was found that the panels exhibit their best electrical performance when subjected to the fastest air flow and the farthest air gap distance between the wall and the panel. In a BIPV/T system utilizing bifacial panels, using the shortest air gap distance during the heating season and the longest air gap distance during other seasons can provide the highest energy efficiency for the building throughout the year.
Benzer Tezler
- Comparative evaluations of traditional house to achieved passive house standard in terms of global warming potential and energy efficiency
Geleneksel ev ile ulaşılan pasif ev standardının küresel ısınma potansiyeli ve enerji verimliliği açısından karşılaştırılması
SİMGE VAR
Yüksek Lisans
İngilizce
2024
Enerjiİstanbul Teknik ÜniversitesiEnerji Bilim ve Teknoloji Ana Bilim Dalı
PROF. DR. HATİCE SÖZER
- Exploring an optimal selection method of photovoltaic systems for university campuses
Üniversite kampüslerindeki güneş panellerinin optimal tasarımı
MARIAM MOHAMAD BARA
Doktora
İngilizce
2022
Mühendislik BilimleriÇankaya ÜniversitesiMimarlık Ana Bilim Dalı
DOÇ. DR. GÜLSU ULUKAVAK HARPUTLUGİL
- 25,6 kWp gücündeki şebekeye bağlı binaya entegre fotovoltaik güç sisteminin üç yıllık performansının parametrelere göre değerlendirilmesi
The three years performance evaluation of 25,6 kWp grid-connected building integrated photovoltaic (BIPW) power plant
CEMİL SUDA
Yüksek Lisans
Türkçe
2007
Fizik ve Fizik MühendisliğiMuğla ÜniversitesiFizik Ana Bilim Dalı
PROF. DR. ŞENER OKTİK
- Assessment of transparent luminescent solar concentrators for building integrated photovoltaics
Şeffaf lüminesan güneş konsantratörlerinin binalara entegre fotovoltaik uygulamaları için değerlendirilmesi
TIMOTHY BUNOTI
Yüksek Lisans
Türkçe
2022
MimarlıkOrta Doğu Teknik ÜniversitesiMimarlık ve Yapılı Çevre Ana Bilim Dalı
Assist. Prof. Dr. MEHMET KORAY PEKERİÇLİ
- Professionals' awareness on the application and use of building integrated photovoltaic systems
Binaya entegre fotovoltaik sistemlerin uygulanması ve kullanımı konusunda profesyonellerin farkındalığı
AYSEN TÜTEN
Yüksek Lisans
İngilizce
2020
Mimarlıkİzmir Yüksek Teknoloji EnstitüsüMimarlık Ana Bilim Dalı
PROF. DR. ZEHRA TUĞÇE KAZANASMAZ