Hızlandırılmış su verilmiş numunelerde kalıntı gerilmenin ölçümü
In accelerated watered samples measurement of residual stress
- Tez No: 848805
- Danışmanlar: PROF. DR. HAYRETTİN AHLATCI
- Tez Türü: Yüksek Lisans
- Konular: Metalurji Mühendisliği, Metallurgical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2024
- Dil: Türkçe
- Üniversite: Karabük Üniversitesi
- Enstitü: Lisansüstü Eğitim Enstitüsü
- Ana Bilim Dalı: Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 66
Özet
İnşaat ve çelik konstrüksiyon alanında kullanılan ve Türkiye'de üretilmeyen yüksek mukavemetli profillerin hızlandırılmış ısıl işlem yöntemleri ile üretilebilmesinin araştırılması amacıyla laboratuar şartlarında S355 JR ve S355J0 kalitesinde HEA 120 ve/veya HEB 120 ebadında profillerin değişik hava/su karışımı oranında soğutma şartları ile tokluktan ödün vermeyerek ve hatta tokluğu artırarak mukavemetinin arttırılması amaçlanmıştır. Türkiye'de HE 280-300 ebatlarında ağır profil üreten tek tesis olduğu ve bu tesiste de profil mukavemet artırma çalışmaları yapılmadığından hareketle bu çalışma ilk olması ve diğer tesislere de örnek olacağından dolayı önemlidir. Ray sertleştirme ile başlayan bu süreçte HE 280-300 ebatlarının sertleşmesi sonucu mukavemet artışı ile şu anda ithalatı yapılan bu ebatların Türkiye şartlarında üretilerek cari açığın azaltılmasına katkıda bulunması planlanmaktadır. Bu çalışmada HEA120 ve HEB120 profillere (S355) 8 bar ve 12 bar basınç altında 10 ve 20 sn sürelerde hızlandırılmış numunelere uygulanmasıyla en yüksek soğuma hızı 60°C/sn en düşük 6 °C/Sn soğuma hızları elde edilmiştir.
Özet (Çeviri)
In order to investigate the production of high-strength profiles, which are used in the field of construction and steel construction and are not produced in Turkey, with accelerated heat treatment methods, S355 JR and S355J0 quality HEA 120 and/or HEB 120 size profiles were tested under laboratory conditions by cooling conditions at different air/water mixture ratios without compromising toughness. It is aimed to increase the strength by increasing the toughness. Considering that it is the only facility in Turkey that produces heavy profiles in sizes HE 280-300 and that no profile strength increase studies have been carried out in this facility, this study is important as it is the first and will set an example for other facilities. In this process, which starts with rail hardening, it is planned to contribute to reducing the current account deficit by producing these sizes, which are currently imported, in Turkey's conditions, with the increase in strength as a result of the hardening of HE 280-300 sizes. In this study, by applying samples to HEA120 and HEB120 profiles (S355) accelerated for 10 and 20 seconds under 8 bar and 12 bar pressure, the highest cooling rate of 60 °C/sec and the lowest cooling rate of 6 °C/sec were obtained.
Benzer Tezler
- The effect of successive quenching and austempering heat treatments on the microstructure of a high silicon steel
Ardışık su verme ve östemperleme ısıl işlemlerinin yüksek silisyumlu bir çeliğin mikroyapısına etkisi
ŞEYMA UĞUR
Yüksek Lisans
İngilizce
2024
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. MURAT BAYDOĞAN
- Toz metalurjisi yöntemiyle elde edilen gözenekli martensitik paslanmaz çeliğin mikroyapısı ve mekanik özellikleri
Microstructural and mechanical properties of porous martensitic stainless steel obtained by powder metallurgy method
İLVEN MUTLU
Doktora
Türkçe
2011
Metalurji Mühendisliğiİstanbul ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. ENVER OKTAY
- Effects of quenching and aging conditions on the hardening behavior of 2024 Al alloy
Su verme ve yaşlandırma koşullarının 2024 Al alaşımının sertleşme davranışı üzerindeki etkileri
İREM YÜCEL
Yüksek Lisans
İngilizce
2024
Metalurji MühendisliğiAtılım ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
DOÇ. DR. ERKAN KONCA
- Sentetik bağlayıcılı hazır sıvaların fiziksel çevre etkileri karşısındaki davranışları üzerine bir araştırma
A Study on the behavior of synthetic based plasters, under influence of physical environment
A. CÜNEYT DİRİ
Doktora
Türkçe
2003
MimarlıkMimar Sinan Güzel Sanatlar ÜniversitesiMimarlık Ana Bilim Dalı
PROF. DR. MURAT ERİÇ
- Hava su atomize sistem ile su verilmiş kendiliğinden temperlenmiş çeliğin üretimi ve mekanik özelliklerinin incelenmesi
Production of mechanical and mechanical properties of self-tempered steel provided with air-water atomized system
EMRE DEMİRCİ
Yüksek Lisans
Türkçe
2022
Metalurji MühendisliğiKarabük ÜniversitesiMetalurji ve Makine Mühendisliği Ana Bilim Dalı
PROF. DR. HAYRETTİN AHLATCI