Electroless deposition of nickel-phosphorous composite coatings for anti-wear in oil & gas
Başlık çevirisi mevcut değil.
- Tez No: 853545
- Danışmanlar: PROF. DR. LUCA MAGAGNIN, PROF. DR. FEDERİCO CUNEO
- Tez Türü: Yüksek Lisans
- Konular: Kimya, Kimya Mühendisliği, Metalurji Mühendisliği, Chemistry, Chemical Engineering, Metallurgical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2017
- Dil: İngilizce
- Üniversite: Politecnico di Milano
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 103
Özet
In the field of oil and gas production, a lot of challenges are faced on a daily basis during extraction and transportation of liquids and gases: high fluid velocities and the presence of sand particles inside the pipes cause very fast erosion of the lines. In this work, electroless nickel-phosphorous composite coatings were produced and studied for oil and gas anti-wear applications. The electroless plating was choosen for the high conformity of deposits and easiness of deposition, while hard carbides particles of silicon carbide and boron carbide were implemented to increase hardness and wear resistance of the composite. The coatings were investigated in terms of the effect of carbides particles amount and mix ratios and the effect of tungtate salt as additive. The samples were then analyzed in terms of composition, morphology, particles distribution and the anti-wear performances were tested with a new self-build setup to simulate the real and severe wear conditions inside tubes.
Özet (Çeviri)
Özet çevirisi mevcut değil.
Benzer Tezler
- Akımsız kaplama yöntemi ile seramik partikül takviyeli nikel esaslı kompozit kaplamaların geliştirilmesi
Development of ceramic particle reinforced nickel based composite coatings with electroless coating method
HASAN ALGÜL
Doktora
Türkçe
2020
Metalurji MühendisliğiSakarya ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. AHMET ALP
- Havacılık ve uzay uygulamalarına yönelik nikel kaplı karbonfiber üretimi ve karakterizasyonu
Nickel coated carbonfiber production and characterization for aerospace applications
CANER ÇİNKA
Yüksek Lisans
Türkçe
2014
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. NURİ SOLAK
- Grafen esaslı kompozit kaplamaların korozyon ve aşınma özellikleri
Corrosion and wear properties of graphene based composite coatings
KUBİLAY KILIÇÇI
Yüksek Lisans
Türkçe
2023
Metalurji MühendisliğiSakarya ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
DOÇ. DR. MEHMET UYSAL
- Metal matrisli kompozit malzemelerde takviye malzemesinin yüzey özelliklerinin iyileştirilmesi
Altering the surface properties of the reinforcement elements in metal matrix composite materials
GÖKÇE SEZEN
Yüksek Lisans
Türkçe
2018
Metalurji MühendisliğiYıldız Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. SİBEL DAĞLILAR
- Nano kompozit kaplama
Nano composite plating
BERİL KAYA
Yüksek Lisans
Türkçe
2007
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF.DR. MEHMET DEMİRKOL