ORTA GERİLİM MOTOR SÜRÜCÜLERİ İÇİN KASKAD BAĞLI ÇOK SEVİYELİ EVİRİCİ TASARIMI
CASCADED MULTILEVEL INVERTER DESIGN FOR MEDIUM VOLTAGE MOTOR DRIVERS
- Tez No: 865877
- Danışmanlar: PROF. DR. FIRAT KAÇAR
- Tez Türü: Doktora
- Konular: Elektrik ve Elektronik Mühendisliği, Electrical and Electronics Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2024
- Dil: Türkçe
- Üniversite: İstanbul Üniversitesi-Cerrahpaşa
- Enstitü: Lisansüstü Eğitim Enstitüsü
- Ana Bilim Dalı: Elektrik ve Elektronik Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Elektrik Elektronik Mühendisliği Bilim Dalı
- Sayfa Sayısı: 135
Özet
Bu çalışma orta ve yüksek uygulamalar için verimli bir sürücüde tasarlamak ve bu konuda çözüm üretmektedir. Bunu elde etmek için ise geleneksel silikon veya silisyum karbür güç yarı iletkenlerini kullanan motor sürücü uygulaması, 3 fazlı AC eviricilerinin sistematik bir değerlendirmesini ve karşılaştırmasını yapmaktadır. OGS teknolojisinin nerede durduğu ve nereye gittiği konusunda kapsamlı ve detaylı bir inceleme sağlamak, teknolojinin mevcut durumunu ve eğilimlerini takip edip son katkılarını özetlemektedir. On bir seviyeli kaskat H-köprüsü (11S-KHK) seri bağlı beş H köprüsü eviriciden bir prototip tasarlandı, hayata geçirildi ve test edildi. Tasarlanmiş cihazın 3 faz olması, çıkış gerilimi, Vout= 320V ve çıkış akımda Iout= 4A'dır. Bu amaca ulaşmak için donanım aşamasının gerçekleştirilmesi ve uygun kontrol tekniklerinin uygulanması gerekmektedir. Prototip oluşturmak için analize KHK eviricinin topolojisinden ve alt modüllerinden başlamak gerekmektedir. Prototip mimari seçiminden sonra yarı iletken anahtarları, güç kaynakları ve sensörleri gibi bileşenlerin seçilmesi yapmaktadır. Daha sonra seçilen bileşenlerini bir araya getirerek elektriksel olarak bağlanacağı baskılı devre kartının (PCB) tasarlanması gerçekleştirilmektedir. Yüksek çıkış kalitesi ve hızlı kontrol tepkisi hedeflenerek eviricinin için uygun kontrol stratejileri uygulanacaktır. Önerilen optimizasyon algoritması optimal kontrol tekniği kullanarak çok seviyeli eviricilerinin performansını arttırmaktır. Eviricinin, gerilimi ve akımı kontrol stratejileri incelenmiştir. Eviricinin tüm çalışma koşullarında simüle edildi. Çok seviyeli modülasyon stratejisinin giriş akımı ve çıkış gerilimi harmonik içeriği üzerindeki etkisini analiz etmektedir. Yeni bir modülasyon tekniği kullanarak güç kalitesini iyileştirmek için 11S-KHK modeli tasarlanacaktır. Literatür taramasındaki kavramları ve sınırlamaları kullanarak, çok seviyeli eviricinin güç kalitesini iyileştirmek için öğretme-öğrenme tabanlı optimizasyon (ÖÖTO)'i kullanan yeni bir amaç fonksiyonu önerilmiştir. Önerilen işlev mevcut tüm diğer işlevlerden daha iyi performans gösterilecektir.
Özet (Çeviri)
This study aims to simulate and design topology and provide a solution in an efficient Medium Voltage Drive (MVD) suitable for medium and high power applications. A systematic evaluation and comparison of motor drive application and three-phase AC-AC inverters using conventional silicon or silicon carbide power semiconductors is made to achieve this. It is necessary to provide a comprehensive and detailed review of where MVD technology stands and where it is going, to follow the current state and trends of the technology and to group and review its latest contributions. The eleven-level Cascade H-Bridge (11S-KHK), a prototype of five series-connected H-bridge inverters, was designed, implemented and tested, as will be explained in more detail. The main aim of this work was to create the 11L-KHK prototype, a small-scale inverter model that will be part of the drive system for an induction motor in the future. The specifications of the desgıned device are output voltage, three-phase, Vout= 320V and output current Iout= 2A. The hardware phase must be carried out to achieve this goal, and appropriate inverter control techniques must be applied. To create a prototype, it is necessary to start the analysis from the KHK inverter architecture topology and submodules. After selecting the prototype architecture, components such as switches, power supplies and sensors must be chosen. Next, the printed circuit board (PCB) needs to be designed onto which the pre-selected components will be glued and electrically connected. This may be the main challenge of this study. For the subsequent extension of these techniques to the induction motor drive system, appropriate control strategies should be applied to interface the inverter to the electrical machine, aiming for good output quality and a fast and stable control response. Önerilen çalışmanın önemli amacı, verimli bir optimizasyon algoritması kullanan optimal bir kontrol tekniği kullanarak çok seviyeli eviricilerin performansını arttırmaktır. This thesis aimed to create a small-scale model of an inverter that will be part of the drive system for an asynchronous motor. The inverter topology and architecture were examined to achieve this, along with possible voltage and current control strategies. It simulates a multi-level inverter that operates efficiently under all operating conditions of the inverter. It analyzes the effect of a multi-level modulation strategy on input current and output voltage harmonic content. The design of a multi-level inverter model to improve power quality using a new modulation technique. Using the concepts and limitations from the literature review, a new objective function using Teaching-Learning Based Optimization (TLC) is proposed to improve the power quality of multi-level inverter. The proposed function outperforms all other existing functions. The results and information provided will help ensure future progress on this project.
Benzer Tezler
- Effects of electrical commissioning activities on electrical asset management in energy from waste power plants
Atıktan enerji üretim tesislerinde elektrik devreye alma aktivitelerinin elektrıksel varlık yönetimine etkisi
MUHAMMED HAMZA FADIL
Yüksek Lisans
İngilizce
2021
Elektrik ve Elektronik Mühendisliğiİstanbul Teknik ÜniversitesiElektrik Mühendisliği Ana Bilim Dalı
PROF. DR. AYDOĞAN ÖZDEMİR
- A non-invasive speed and position sensor for induction machines using external search coils
Asenkron motorlar için harici bobin ile modifiyesiz hız ve pozisyon algılayıcısı
OZAN KEYSAN
Yüksek Lisans
İngilizce
2009
Elektrik ve Elektronik MühendisliğiOrta Doğu Teknik ÜniversitesiElektrik ve Elektronik Mühendisliği Bölümü
PROF. DR. BÜLENT ERTAN
- A novel approach for synthesising sinus waveforms at power level
Güç seviyesindeki sinüs dalga şekillerinin sentezlenmesinde yeni bir yaklaşım
SERKAN PAKİ ŞEDELE
Yüksek Lisans
İngilizce
2004
Elektrik ve Elektronik MühendisliğiOrta Doğu Teknik ÜniversitesiElektrik-Elektronik Mühendisliği Ana Bilim Dalı
PROF. DR. BÜLENT ERTAN
- Selection of suitable PWM switching and control methods for modular multilevel converter drives
Modüler çok seviyeli dönüştürücü sürücüleri için uygun DGM anahtarlama ve kontrol yönteminin seçimi
BARIŞ ÇİFTÇİ
Yüksek Lisans
İngilizce
2014
Elektrik ve Elektronik MühendisliğiOrta Doğu Teknik ÜniversitesiElektrik-Elektronik Mühendisliği Ana Bilim Dalı
DOÇ. DR. AHMET MASUM HAVA
- Implementation of vector control for induction motor drives
Asenkron motor sürücüler için vektör kontrol uygulaması
HAYRETTİN CAN
Yüksek Lisans
İngilizce
1999
Elektrik ve Elektronik MühendisliğiOrta Doğu Teknik ÜniversitesiElektrik-Elektronik Mühendisliği Ana Bilim Dalı
PROF. DR. H. BÜLENT ERTAN