Kompozit, ataçman ve plak tipinin, diş inklinasyonlarının, çapraşıklığın ve kılavuz plağın basınçlı uygulanmasının şeffaf plak ataçmanlarının yapımı üzerine etkilerinin incelenmesi
Investigation of the effects of composite, attachment and aligner type, tooth inclinations, crowding and pressurized application of the template on the construction of clear aligner attachments
- Tez No: 869936
- Danışmanlar: PROF. DR. SABRİ İLHAN RAMOĞLU
- Tez Türü: Diş Hekimliği Uzmanlık
- Konular: Diş Hekimliği, Dentistry
- Anahtar Kelimeler: Ataçman, Kompozit, Çapraşıklık, Basınç, Plak, İnklinasyon, Attachment, Composite, Crowding, Pressure, Plate, Inclination
- Yıl: 2024
- Dil: Türkçe
- Üniversite: Altınbaş Üniversitesi
- Enstitü: Lisansüstü Eğitim Enstitüsü
- Ana Bilim Dalı: Ortodonti Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
AMAÇ: Çalışmamızda kompozit ve ataçman tipinin, diş inklinasyonlarının, çapraşıklığın ve kılavuz plağın basınçlı uygulanmasının şeffaf plak ataçmanlarının doğruluğu üzerine etkilerinin incelenmesi amaçlanmaktadır. GEREÇ VE YÖNTEM: Çalışmamızda 48 adet çekilmiş dişten 2 farklı fantom çene oluşturulmuş ve bu çenelerden 3Shape TRIOS #C4.1 aracılığı ile 3 boyutlu (3B) taramalar alınmıştır. Bu taramalara uygun olarak Orthero, FAS aligner system ve Smilab firmalarından geleneksel ataçmanları içeren uygun kılavuz plaklar istenmiştir. Oluşturulan fantom çenelerin her biri için, her bir firmadan 3 set kılavuz plak alınmıştır. Kılavuz plaklar aracılığı ile fantom çenelere ataçmanlar, işlem sırasında basınç uygulayarak ve uygulamayarak olmak üzere iki farklı yöntem ile yerleştirilmiştir. Farklı viskozitesiye sahip 3 farklı kompozit materyali (3M™ Filtek™ Supreme Flowable Restoratif Şırınga, AO Bracepaste Medium Viscosity Adhesive, Tokuyama Dental Estelite Sigma Quick Supra-Nano Filled Universal Composite) ile kılavuz plaklar aracılığıyla bu işlemler tekrarlanmıştır. Fantom çenelerden ataçman uygulaması sonrasında 3Shape TRIOS #C4.1 aracılığı ile tekrar 3B taramalar alınarak Geomagic Control X Software programı üzerinde uygulama öncesi ve sonrası elde edilen taramalar çakıştırılmıştır. Bu çakıştırmalar üzerinde boyutsal ölçümler yapılarak kompozitler, ataçman tipleri, çapraşıklık miktarları, diş inklinasyonları ve kılavuz plağa basınç uygulanmasının ataçmanlarının yapımı üzerine etkileri analiz edilmiştir. İstatistiksel verilerin analizi için normal dağılım gösteren niceliksel verilerin değerlendirilmesinde parametrik testler, normal dağılım göstermeyen durumda ise non-parametrik testler kullanılmıştır. Normallik varsayımı altında Niceliksel-Niceliksel olduğu durumda, Pearson Correlation, Niteliksel-Niceliksel olduğu durumda ise grup sayılarına göre Independent Sample t testi ve One Way Anova testleri kullanılmıştır. Normalliğin sağlanmadığı durumda ise Niceliksel-Niceliksel olduğu durumda, Spearman's Correlation, Niteliksel-Niceliksel olduğu durumda ise grup sayılarına göre Mann-Whitney U testi ve Kruskall Wallis testleri kullanılmıştır. Veri türü niteliksel-niteliksel olduğu durumda ise Chi-Square testi kullanılmıştır. Anlamlılık p<0.05 ve p<0,01 düzeylerinde değerlendirilmiştir. BULGULAR: Düşük viskoziteli kompozit kullanımında taşan kompozit miktarı ideal inklinasyona sahip dişlerde prokline ve retrokline dişlere oranla daha az olmaktadır. Işınlama sırasında kılavuz plağa basınç uygulanmadığı takdirde, taşan kompozit miktarı basınç uygulanmasına oranla daha fazla olmaktadır. Çapraşıklık miktarına göre değerlendirme yapıldığında, çapraşıklık olan bölgede ataçman boyutları daha fazla olmaktayken taşan kompozit miktarı daha az olmaktadır. Kalın kılavuz plak kullanımında adaptasyon daha iyi olmakta; taşan kompozit miktarı daha az olmaktadır. Işınlama sırasında kılavuz plağa basınç uygulandığı takdirde, yüksek viskoziteli kompozit kullanımında taşan kompozit miktarı daha az iken; kılavuz plağa basınç uygulanmadığı takdirde yüksek viskoziteli kompozit kullanımında taşan kompozit miktarı fazla olmaktadır. SONUÇ: Çalışma sonucunda kompozit ve plak tipinin, diş inklinasyonlarının, kılavuz plağa basınç uygulanmasının ve çapraşıklık miktarının ataçman yapımına etkisi olduğu bulunmuştur. Şeffaf plak tedavilerinde istenilen diş hareketlerinin elde edilmesinde büyük önem taşıyan ataçmanların yapımında bu etkilerin dikkate alınmasında fayda olduğu düşünülmektedir.
Özet (Çeviri)
OBJECTIVE: Our study aims to investigate the effects of composite and attachment type, tooth inclinations, crowding amount and pressurized application of the template on the accuracy of clear aligner attachments. MATERIAL AND METHOD: In our study, 2 different phantom jaws were created from 48 extracted teeth and 3-dimensional (3D) scans were taken from these jaws with 3Shape TRIOS #C4.1. In accordance with these scans, templates containing traditional attachments from Orthero, FAS aligner system and Smilab were requested. For one of the phantom jaws, 3 sets of templates were taken from each company. Attachments were placed on the phantom jaws via templates in two different ways: with and without applying pressure during the process. These procedures were repeated using templates with 3 different composite materials with different viscosities (3M™ Filtek™ Supreme Flowable Restorative Syringe, AO Bracepaste Medium Viscosity Adhesive, Tokuyama Dental Estelite Sigma Quick Supra-Nano Filled Universal Composite). After the attachment application from the phantom jaws, 3D scans were taken again via 3Shape TRIOS #C4.1 and the scans obtained before and after the application were overlapped on the Geomagic Control X Software program. Dimensional measurements were made on these overlaps and the effects of composites, attachment types, crowding amounts, tooth inclinations and applying pressure to the template on the accuracy of the attachments were analyzed. For the analysis of statistical data, parametric tests were used to evaluate normally distributed quantitative data, and non-parametric tests were used in cases that did not show normal distribution. Under the assumption of normality, in case of Quantitative-Quantitative, Pearson Correlation, in case of Qualitative-Quantitative, Independent Sample t test and One Way Anova tests were used according to the number of groups. In cases where normality was not achieved, Spearman's Correlation was used in the case of Quantitative-Quantitative, and Mann-Whitney U test and Kruskall Wallis tests were used according to the number of groups in the case of Qualitative-Quantitative. If the data type was qualitative, the Chi-Square test was used. Significance was evaluated at p<0.05 and p<0.01 levels. RESULTS: When low viscosity composite is used, the amount of overflowed composite is less in teeth with ideal inclination than in procline and retrocline teeth. If no pressure was applied to the template during curing, the amount of overflowed composite was higher than when pressure was applied. When evaluated according to the amount of crowding, the amount of overflowed composite is less in the area with crowding, while the size of the attachment is more. When a thicker template is used, adaptation is better and the amount of overflowing composite is less. If pressure is applied to the template during curing, the amount of overflow composite is less when using high viscosity composite, while the amount of overflow composite is more when using high viscosity composite when no pressure is applied to the template. CONCLUSION: As a result of the study, it was found that composite and aligner type, tooth inclinations, application of pressure to the template and the amount of crowding have an effect on the attachment construction. It is thought that it is useful to consider these effects in the construction of attachments, which are of great importance in obtaining the desired tooth movements in clear aligner treatments.
Benzer Tezler
- Şeffaf plak ataşman yapımında kullanılan farklı kompozit materyallerinin uygulama süresi, yüzey pürüzlülüğü ve bağlanma dayanıklılığı bakımından karşılaştırılması
Comparison of different composite materials used in clear aligner attachment production in terms of application time, surface roughness and bond strength
SERVET ERBAŞ
Diş Hekimliği Uzmanlık
Türkçe
2023
Diş HekimliğiHacettepe ÜniversitesiOrtodonti Ana Bilim Dalı
DOÇ. DR. EZGİ ATİK
- Şeffaf plak tedavilerinde kullanılan farklı kompozit materyallerinin makaslama bağlanma dayanımları ve aşınma dirençlerinin karşılaştırılması
Comparison of shear bond strength and wear resistance of different composite materials used in clear aligner therapy
BURAK BASRİ ÜSTÜNÜNAL
Diş Hekimliği Uzmanlık
Türkçe
2025
Diş HekimliğiBolu Abant İzzet Baysal ÜniversitesiOrtodonti Ana Bilim Dalı
DOÇ. DR. YASEMİN NUR KORKMAZ
DOÇ. DR. YASİN HEZENCİ
- Şeffaf plak tekniğinde kullanılan farklı kompozit ataşmanların ve üçüncü molar varlığının maksiller molar distalizasyonuna etkisinin sonlu elemanlar metodu ile incelenmesi
Investigation of the effect of different composite attachments used and the presence of the third molar on maxillary molar distalization in the clear aligner technique using the finite element method
ASLIHAN KUĞUOĞLU
Diş Hekimliği Uzmanlık
Türkçe
2023
Diş HekimliğiHacettepe ÜniversitesiOrtodonti Ana Bilim Dalı
DOÇ. DR. BENGİSU AKARSU GÜVEN
- Restoratif diş tedavisinde kullanılan snow-plow tekniğinin, şeffaf plak tedavisinde ataşman yapımındaki etkinliğinin uygulama süresi ve uygulama hassasiyeti açısından değerlendirilmesi
Evaluation of the effectiveness of the snow-plow technique used in restorative dentistry for attachment production in clear aligner treatment: Manipulation time and reproduction precision
GİZEM DEMİR
Doktora
Türkçe
2024
Diş HekimliğiSağlık Bilimleri ÜniversitesiOrtodonti Ana Bilim Dalı
PROF. DR. SERKAN GÖRGÜLÜ
- Şeffaf plak tedavisinde kullanılan ataçmanların hassasiyetine farklı viskozitedeki kompozit materyallerin etkisinin incelenmesi
Investigation of the effect of composite materials of different viscosity on the sensitivity of attachments used in aligner treatment
KÜBRA YILDIZ
Diş Hekimliği Uzmanlık
Türkçe
2023
Diş HekimliğiSağlık Bilimleri ÜniversitesiOrtodonti Ana Bilim Dalı
DR. ÖĞR. ÜYESİ KÜBRA GÜLNUR TOPSAKAL