Karbon kompozit malzemelerde alaşım elementleri ile elektrik direncinin iyileştirilmesine yönelik inceleme
Investigation on the sources of electricity consumption with alloy elements in carbon carbon materials composite
- Tez No: 895144
- Danışmanlar: DR. ÖĞR. ÜYESİ SİDEM KANER
- Tez Türü: Yüksek Lisans
- Konular: Metalurji Mühendisliği, Metallurgical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2023
- Dil: Türkçe
- Üniversite: Pamukkale Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 112
Özet
Bu çalışma kapsamında, farklı yoğunluk ve örgü tiplerine sahip karbon fiber kompozitlere ikinci takviye olarakta gümüş ilave edilerek mekanik özellikleri ve elekriksel direnci incelenmiştir. Örgü türü plain (bezayağı) 2, 4, 6 ve 8 tabaka 200 g/m2 ve twill (dimi) 2, 4, 6 ve 8 tabaka 245 g/m2 karbon fiberlere ilave olarak her bir tabaka için epoksi ve ilavesiz, kullanılan epoksiye göre ağırlıkça sırasıyla, %2 ve %4 gümüş konularak vakum infizyon yöntemi ile üretilmiştir. Üretilen kompozitlere yakma deneyi, elektriksel direncini ve mekanik özelliklerini incelemek için sırasıyla ASTM D2584, ASTM D257-14 ve ASTM D790 standartlarına göre yapılmıştır. Deneyler sonucunda ilavesiz ve gümüş takviyeli kompozitlerin yakma deneyi, elektriksel direnç ve çekme deneyinden elde edilen veriler incelenmiştir. Twill tipi dokumadan elde edilen verilerin daha yüksek çıktığı tespit edilmiştir. Çekme deneyi sonrası elde edilen kırık yüzeyler gümüş paladyum cihazında kaplandıktan sonra alan emisyon taramalı elektron mikroskobu (FESEM) ile incelenerek elde edilen görüntü ve sayısal veriler hakkında değerlendirilmelerde bulunulmuştur.
Özet (Çeviri)
Within the scope of this study, the mechanical properties and electrical resistance of carbon fiber composites with different densities and mesh types were examined by adding silver as a second reinforcement. Plain weave type 2, 4, 6 and 8 layers 200 g/m2 and twill 2, 4, 6 and 8 layers 245 g/m2 are produced by vacuum infusion method by placing epoxy and non-added silver for each layer, respectively, by weight according to the epoxy used, in addition to carbon fibers, 2% and 4% silver, respectively. The combustion experiment on the manufactured composites was carried out according to ASTM D2584, ASTM D257-14 and ASTM D790 standards, respectively, to examine their electrical resistance and mechanical properties. As a result of the experiments, the data obtained from the combustion experiment, electrical resistance and tensile experiment of non-added and silver-reinforced composites were examined. It was found that the data obtained from twill type weaving came out higher. After the broken surfaces obtained after the tensile experiment were coated in a silver palladium device, they were examined with a field emission scanning electron microscope (FESEM) and evaluations were made about the image and numerical data obtained.
Benzer Tezler
- Synthesis, development and characterization of some W-based compounds, composites and hybrid materials
Volfram esaslı bileşiklerin, kompozitlerin ve de hibrid malzemelerin üretimi, geliştirilmesi ve karakterizasyonu
SELİM COŞKUN
Doktora
İngilizce
2011
Bilim ve Teknolojiİstanbul Teknik Üniversitesiİleri Teknolojiler Ana Bilim Dalı
PROF. DR. M. LÜTFİ ÖVEÇOĞLU
- AISI D2 soğuk iş takım çeliklerinin darbeli kayma aşınma davranışına mikroyapının etkisi
The effect of microstructure on impact sliding wear behavior of AISI D2 cold work tool steels
HALİL İBRAHİM FİLİZ
Yüksek Lisans
Türkçe
2021
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. MURAT BAYDOĞAN
- B4c ilaveli tzm alaşımlarının spark plazma sinterleme (SPS) yöntemi ile farklı tasarımlarla üretimi ve karakterizasyonu
Production and characterization of b4c rei̇nforced tzm alloy with different designs prepared by spark plasma sintering (SPS) method
BARIŞ YAVAŞ
Doktora
Türkçe
2020
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. GÜLTEKİN GÖLLER
- Magnezyum esaslı karbon nanotüp ve seryum takviyeli nanokompozit malzeme geliştirilmesi ve özelliklerinin araştırılması
Development of Mg based carbon nanotubes and cerium reinforced nano composites and research of their properties
FATMA NAZLI SARI
Doktora
Türkçe
2015
Makine MühendisliğiErciyes ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. MEHMET BAKİ KARAMIŞ
- Design of a stainless steel composite bridge according to the eurocodes and cost analysis
Paslanmaz çelik ile kompozit bir köprünün eurocode'a göre tasarımı ve maliyet analizi
TİJEN BAYER
Yüksek Lisans
İngilizce
2014
İnşaat Mühendisliğiİstanbul Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. BARLAS ÖZDEN ÇAĞLAYAN