Grafen oksit kompozitlerinin sentezi, karakterizasyonu ve sulu çözeltilerden boya gideriminde kullanımının incelenmesi
Synthesis, characterization of graphene oxide composites and investigation of their use in dye removal from aqueous solutions
- Tez No: 899070
- Danışmanlar: PROF. DR. ARZU YAKAR
- Tez Türü: Yüksek Lisans
- Konular: Kimya Mühendisliği, Chemical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2024
- Dil: Türkçe
- Üniversite: Pamukkale Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Kimya Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 118
Özet
Bu çalışmada, atık suların adsorpsiyon yöntemiyle arıtılmasına katkıda bulunmak amacıyla manyetit, grafen oksit (GO) ve hidroksiapatit (HAP) kullanılarak yeni bir nanokompozit adsorban malzemesi (MGOH) üretilmiştir. Adsorbanın yapısında bulunan manyetit, nanokompozite manyetik özellik sağlamak içindir. Böylece adsorban, dışarıdan uygulanan manyetik etki ile bulunduğu ortamdan kolayca uzaklaştırılabilmektedir. Nanokompozit üretimi için, GO modifiye edilmiş Hummers yöntemi ile ve manyetit birlikte çöktürme yöntemiyle üretilmiştir. Nanokompozit ise, manyetit, GO ve HAP'nin birlikte çöktürülmesiyle hazırlanmıştır. Elde edilen ürün, XRD, FTIR, SEM-EDX, BET gibi analiz yöntemleri kullanılarak karakterize edilmiştir. MGOH'nin sulu çözeltiden tekstil boyası (Maxilon® Blue GRL (300%)) giderme davranışı; değişen başlangıç boya derişimi (1000-3000 mg/L), zaman, pH (3-9) ve sıcaklık (25°C - 55°C) gibi koşullar altında araştırılmıştır. Maksimum adsorpsiyon kapasitesi 55°C sıcaklık, 3000 mg/L boya derişimi ve pH 7'de 120,73 mg/g olarak bulunmuştur. Elde edilen veriler, adsorpsiyon sürecinin kinetik olarak yalancı ikinci dereceden kinetik modele uygun olarak ilerlediğini, termodinamik reaksiyonun endotermik olduğunu ve boya moleküllerinin adsorpsiyonunun Langmuir izoterm modeli ile uyumlu olduğunu göstermektedir. Ayrıca, adsorban malzemenin üçüncü kullanımındaki yeniden kullanılabilirliği %66,47 olarak bulunmuştur.
Özet (Çeviri)
In this study, a new nanocomposite adsorbent material (MGOH) was produced by using magnetite, graphene oxide (GO) and hydroxyapatite (HAP) to contribute to the treatment of wastewater through the adsorption method. The magnetite found in the nanocomposite structure provides magnetic properties. Thus, the adsorbent offers the opportunity to be easily removed from its environment by magnetic effect applied from outside. For nanocomposite production, GO was first produced by the modified Hummers method, and magnetite was produced by the co-precipitation method. Nanocomposite was prepared by combining magnetite, GO and HAP in the co-precipitation process. The product obtained was characterized using analysis methods such as XRD, FTIR, SEM-EDX, BET. Textile dye (Maxilon® Blue GRL (300%)) removal behavior of MGOH from aqueous solution was investigated under such conditions; changing initial dye concentration (1000-3000 mg/L), time, pH (3-9) and temperature (25°C -55°C). The maximum adsorption capacity was found to be 120.73 mg/g at 55℃ temperature, 3000 mg/L dye concentration and pH 7. The data obtained show that the adsorption process proceeds kinetically in accordance with the pseudo-second order kinetic model, that the thermodynamic reaction is endothermic, and the adsorption of dye molecules is compatible with the Langmuir isotherm model. Additionally, the reusability of the adsorbent material in its third use was found to be 66.47%.
Benzer Tezler
- Grafen, BN, MoS2, TiS3 sentezi, karakterizasyonu ve suda çözünebilir grafen/boyar madde kompozitlerinin fotofiziksel özelliklerinin incelenmesi
Synthesis, characterization of graphene, BN, MoS2, TiS3 and investigation of photophysical properties of water-soluble graphene/dye composites
GÖKHAN GÜVEN BATIR
- Manyetik nanopartikül içerikli grafen oksit sentezi ve karakterizasyonu
Synthesis and characterisation of graphene oxide with magnetic nanoparticles
HANDE HAMİYET KONUK
Yüksek Lisans
Türkçe
2023
Kimya MühendisliğiGazi ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
DOÇ. DR. HÜSEYİN ARBAĞ
- Altın nanopartikül/karbon nanokompozit yapıların sentezi ve kapasitör özelliklerinin araştırılması
Synthesis of gold nanoparticle/carbon nanocomposite structures and investigation of capacitor properties
NECMİYE BAHAR
- TiO2/ERGO nanokompozit elektrotların CdTe, PbTe, Bi2Te3, CdTe/PbTe, CdTe/Bi2Te3 ve PbTe/Bi2Te3 kuantum parçacıklar ile dekore edilmesi, karakterizasyonu ve QDSSCs'lerde uygulamaları
Decoration of TiO2/ERGO nanocomposite electrodes with CdTe, PbTe, Bi2Te3, CdTe/PbTe, CdTe/Bi2Te3 and PbTe/Bi2Te3 quantum dots, characterization and applications in QDSSCs
ELİF TEMUR
- Investigation of capacitive behaviour of emulsion polymerized pedot and its nanocomposites
Emülsiyon polimerizasyonu ile sentezlenen pedot ve nanokompozitlerinin kapasitif özelliklerinin incelenmesi
DENİZ GÜLERCAN
Doktora
İngilizce
2019
Polimer Bilim ve Teknolojisiİstanbul Teknik ÜniversitesiPolimer Bilim ve Teknolojisi Ana Bilim Dalı
PROF. DR. ABDÜLKADİR SEZAİ SARAÇ