İlmenit yapısına sahip NiMnO3- metal oksit kompozitlerinin süperkapasitörlerdepozitif elektrot olarak incelenmesi
Investigation of ilmenite structured NiMnO3-metal oxide composites as positive electrodes in supercapacitors
- Tez No: 916791
- Danışmanlar: PROF. DR. TUNÇ TÜKEN
- Tez Türü: Doktora
- Konular: Kimya, Chemistry
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2025
- Dil: Türkçe
- Üniversite: Çukurova Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Kimya Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 98
Özet
Bu çalışmada NiMnO 3 (NMO), NiCo 2 O 4 (NCO) ve MnCo 2 O 4 (MCO) metal oksitleri optimizasyon çalışmalarıyla birlikte hidrotermal yöntem ile başarılı bir şekilde sentezlenmiştir. α-MnO 2 (MO)'nun sentezinde ise birlikte çöktürme yöntemi kullanılmıştır. Sentezlenen her bir metal oksitin, süperkapasitörlerde pozitif elektrot olarak kullanılması durumunda sergileyeceği performans incelenmiştir. Bununla birlikte temel metal oksit olarak seçilen ilmenit yapısına benzer özellik gösteren NMO'nun, diğer metal oksitler ile 1:0, 0:1, 1:1, 1:3 ve 1:7 oranında fiziksel olarak karıştırılması ile hazırlanan elektrotların performansları incelenerek, NMO'nun süperkapasitör elektrodu olarak kullanımını daha da avantajlı hale getirmesine çalışılmıştır. Bu karışımlardan NMO: 3MO elektrodu için spesifik kapasitans değerinin, NMO ile kıyaslandığında, 10 mV/s tarama hızında alınan döngüsel voltametri eğrilerinden 120 F/g'dan 189 F/g'a arttırdığı belirlenmiştir. NMO: NCO oranında birlikte kullanımı ile NMO'nun spesifik kapasitans değerini 120 F/g 'dan 285 F/g'a arttırdığı ve NMO:3MCO oranında birlikte kullanılan elektrodun NMO'nun spesifik kapasitans değerini 120 F/g'dan 241 F/g'a arttırdığı görülmüştür. Bu katkılamanın, spesifik kapasitans artışlarına etkisi ile şarj-deşarj olma hızı üzerindeki etkileri farklıdır ve bu elektrot materyalleri, bir süperkapasitörde arzu edilen özelliğe göre kullanıcı tarafından amaca uygun seçilebilecektir. Hızlı şarj deşarj uygulamasının ön planda olduğu bir sistem için NMO-3MO elektrot materyali avantajlı iken yüksek yük kapasitesi istenildiğinde ise NMO-NCO elektrodunun kullanımı önerilmektedir.
Özet (Çeviri)
In this study, NiMnO 3 (NMO), NiCo 2 O 4 (NCO), and MnCo 2 O 4 (MCO) metal oxides were successfully synthesized by hydrothermal method with optimization studies. Co-precipitation method was used for the synthesis of α-MnO 2 (MO). The performance of each synthesized metal oxide has been investigated in case it is used as a positive electrode in supercapacitors. Furthermore, the performance of electrodes fabricated by physically mixing NMO, which possesses properties similar to the ilmenite structure selected as the primary metal oxide, with other metal oxides in ratios of 1:0, 0:1, 1:1, 1:3, and 1:7 was examined to enhance the use of NMO as a supercapacitor electrode. The cyclic voltammetry curves obtained at a scan rate of 10 mV/s revealed that the specific capacitance value for the NMO:3MO electrode increased from 120 F/g to 189 F/g compared to NMO. It was observed that the combination of NMO with an NMO:NCO ratio increased the specific capacitance value of NMO from 120 F/g to 285 F/g, and the combination of the electrode with an NMO:3MCO ratio increased the specific capacitance value of NMO from 120 F/g to 241 F/g. The effects of this doping on the specific capacitance and the effects on the charge-discharge rate are different, and these electrode materials can be purposefully selected by the user according to the desired property in a supercapacitor.The NMO-3MO electrode material is advantageous for a system where fast charge-discharge application is at the forefront, while the use of NMO-NCO electrode is recommended when high load capacity is desired.
Benzer Tezler
- Keçikalesi (Aksaray) volkaniklerinin petrolojisi ve jeokimyası
Petrology and geochemistry of Kecikalesi (Aksaray) volcanics
MURAT AKKUŞ
Yüksek Lisans
Türkçe
2009
Jeoloji MühendisliğiAnkara ÜniversitesiJeoloji Mühendisliği Ana Bilim Dalı
PROF. DR. A. UMRAN DOĞAN
- Hasandağ doğusu (Niğde) volkaniklerinin petrolojik modellemsi
Petrological modelling of the eastern part of Hasandag volcanics (Nigde)
ŞEBNEM TOSUN
Yüksek Lisans
Türkçe
2008
Jeoloji MühendisliğiAnkara ÜniversitesiJeoloji Mühendisliği Ana Bilim Dalı
PROF. DR. A. UMRAN DOĞAN
- A novel method for determining barite sag in static mud columns using buoyancy
Durağan çamur sütununda barit çökeliminin buoyant kuvveti ile belirlenmesi için yeni bir yöntem
MUHAMMED KEMAL ÖZEL
Yüksek Lisans
İngilizce
2019
Petrol ve Doğal Gaz Mühendisliğiİstanbul Teknik ÜniversitesiPetrol ve Doğal Gaz Mühendisliği Ana Bilim Dalı
DOÇ. DR. GÜRŞAT ALTUN
- İlmenit cevherinden alkali liç yöntemi ile TiO2 eldesi
Production of TiO2 from ilmenite ore by alkali leaching method
BÜŞRA SERT
Yüksek Lisans
Türkçe
2023
Kimya MühendisliğiKocaeli ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
DOÇ. DR. MELTEM YILDIZ
- Zararlı gazların katalitik filtrasyonunda kullanılan gözenekli heterojen destek katalizörlerin üretilmesi ve katalitik etkinliklerinin incelenmesi
Production of porous heterogeneous support catalysts used in catalytic filtration of harmful gases and investigation of their catalytic activities
UĞUR ÇAĞLAYAN