Otomotiv hukukunda bayi, üretici, ithalatçı ve yetkili servisin alıcıya karşı ayıptan doğan sorumluluğu
Liability of dealers, manufacturers, importers and authorized service to customers for defects in automotive law
- Tez No: 939544
- Danışmanlar: DR. ÖĞR. ÜYESİ BEDİA GÜLEŞ
- Tez Türü: Yüksek Lisans
- Konular: Hukuk, Law
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2025
- Dil: Türkçe
- Üniversite: KTO Karatay Üniversitesi
- Enstitü: Lisansüstü Eğitim Enstitüsü
- Ana Bilim Dalı: Özel Hukuk Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 255
Özet
Otomotiv hukukunda motorlu taşıt satış sözleşmesi gereğince motorlu taşıt satışı gerçekleştiren bayilerin alıcılara karşı ayıptan dolayı sorumluluğu söz konusudur. Buna ek olarak üretici, ithalatçı ve yetkili servis istasyonlarının da alıcılara karşı sorumluluğu bulunur. Ancak bu kişilerin ayıptan dolayı sorumlu olabilmesi için motorlu taşıt satış sözleşmesi yapan alıcıların kural olarak tüketici olması şarttır. Tüketici alıcıların ayıptan doğan sorumluluk anlamında daha geniş haklara sahip olmasından dolayı motorlu taşıt satış sözleşmesi yapan alıcının sahip olduğu sıfatın tespiti önem arz eder. Bu kapsamda kural olarak tüketici alıcılar motorlu taşıt satışlarında garanti ve satış sonrası hizmetlerden faydalanma imkanına sahiptir. Buna ek olarak motorlu taşıt satış sözleşmesinde sorumluluğa neden olan ayıbın mevcudiyeti ve niteliğinin tespiti sorumluluğun belirlenmesi açısından önemlidir. Ayıptan dolayı sorumlu olan kişilerin sorumluluğunun doğabilmesi için gereken şartların tamamının bir arada bulunması gerekir. Ayıptan sorumluluk için gereken şartların niteliği alıcının sıfatına göre değişiklik gösterir. Söz konusu şartların gerçekleşmesi durumunda bayi, üretici, ithalatçı ve yetkili servisin alıcıya karşı ayıptan doğan sorumluluğu gündeme gelir. İlgili şartların gerçekleşmesi halinde alıcı, sahip olduğu haklardan dilediğini seçerek ayıptan dolayı sorumlu olan kişilere karşı ileri sürebilir.
Özet (Çeviri)
In automotive law, dealers who sell motor vehicles in accordance with the motor vehicle sales contract are liable to the buyers for defects. In addition, manufacturers, importers and authorized service stations also have responsibilities to buyers. However, in order for these persons to be liable for the defect, the buyers who make a motor vehicle sales contract must be consumers as a rule. Since consumer buyers have wider rights in terms of liability arising from defects, it is important to determine the title of the buyer who makes a motor vehicle sales contract. In this context, as a rule, consumer buyers have the opportunity to benefit from warranty and after-sales services in motor vehicle sales. In addition, it is important to determine the existence and nature of the defect that causes liability in the motor vehicle sales contract in terms of determining liability. All of the necessary conditions must be present in order for the liability of the persons responsible for the defect to arise. The nature of the conditions required for liability for defects varies according to the title of the buyer. In the event that the aforementioned conditions are met, the responsibility of the dealer, manufacturer, importer and authorized service arising from the defect against the buyer comes to the fore. If the relevant conditions are met, the buyer can choose any of his rights and claim them against the persons responsible for the defect.
Benzer Tezler
- Contribution a la recherche d'un cadre juridique pour un droit international de laconcurrence plus efficace
Daha etkin bir uluslararası rekabet için hukuki çerçeve arayışı
ALİ CENK KESKİN
Doktora
Fransızca
2009
HukukGalatasaray ÜniversitesiKamu Hukuku Ana Bilim Dalı
PROF. DR. JEAN MARC SOREL
PROF. DR. HALİL ERCÜMENT ERDEM
- Otomotiv sektöründe tüketicilerin karar vermelerindeki etkenler
The factors on decision making of consumers in automotive industry
YUSUF OFLAZ
Yüksek Lisans
Türkçe
2019
İşletmeBahçeşehir Üniversitesiİşletme Ana Bilim Dalı
DOÇ. DR. CEYDA AYSUNA TÜRKYILMAZ
- Otomotiv tedarik zincirine yönelik ISO/TS 16949:2002 kalite yönetim sistemi ve hayes lemmerz inci alüminyum jant fabrikası'nda uygulanması
Quality management system ISO/TS 16949:2002 intended for the supply chain of the automotive and application in the aluminium wheel factory hayes lemmerz inci
MEHMET ALİ TOKER
- Anizotropik plastik akma yüzeyine dayalı sayısal hasar modelinin geliştirilmesi ve deneysel doğrulaması
Development and experimental validation of a numerical damage model based upon an anisotropic plastic yield criterion
TOROS ARDA AKŞEN
Doktora
Türkçe
2023
Makine MühendisliğiSakarya ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. MEHMET FIRAT