Cam elyaf takviyeli PPS (polifenilen sülfid) termoplastik kompozit malzemenin su armatürü iç gövde üretiminde alternatif malzeme olarak kullanılabilirliğinin deneysel araştırılması
Experimental investigation of the usability of glass fiber reinforced polyphenylene sulfide (PPS) thermoplastic composite material as an alternative material in the production of inner bodies for water fittings
- Tez No: 964730
- Danışmanlar: PROF. DR. MUSTAFA AYDIN
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2025
- Dil: Türkçe
- Üniversite: Manisa Celal Bayar Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Makine ve İmalat Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 86
Özet
Su armatürleri, sıhhi tesisat sistemlerinde suyun kontrolünü ve yönlendirilmesini sağlayan temel bileşenler olup, işlevsellik ve estetik açısından önemli bir rol üstlenmektedir. Bu tez çalışmasında, iç gövde üretiminde yaygın olarak kullanılan pirinç malzeme yerine cam elyaf takviyeli Polifenilen Sülfid (PPS-GF) termoplastik kompozit malzemenin alternatif olarak kullanılabilirliği deneysel olarak araştırılmıştır. Çalışma kapsamında, PPS-GF'nin yüksek sıcaklık dayanımı, kimyasal direnç, boyutsal kararlılık ve mekanik özellikleri değerlendirilmiş; enjeksiyon yöntemiyle üretilen iç gövde prototipleri, pirinç parçalar ile üretim süreci, performans testleri (mekanik, korozyon, akış) ve maliyet analizi bakımından karşılaştırılmıştır. Elde edilen bulgular, cam elyaf takviyeli PPS kompozitlerin özellikle hafiflik, korozyon direnci, üretim kolaylığı ve çevresel faydalar açısından önemli avantajlar sunduğunu ortaya koymaktadır. Bu yönüyle çalışma, su armatürü sektöründe geleneksel metallere alternatif termoplastik kompozit malzeme kullanımına bilimsel katkı sağlamaktadır.
Özet (Çeviri)
Faucets are essential components in plumbing systems, providing control and direction of water flow, and they play a significant role in both functionality and aesthetics. In this thesis, the feasibility of using glass fiber reinforced Polyphenylene Sulfide (PPS-GF) thermoplastic composite as an alternative to the traditionally used brass material in the production of faucet inner bodies has been experimentally investigated. Within the scope of the study, the high thermal resistance, chemical resistance, dimensional stability, and mechanical properties of PPS-GF were evaluated. Inner body prototypes produced by the injection molding method were compared with brass counterparts in terms of production process, performance tests (mechanical, corrosion, and flow), and cost analysis. The findings revealed that glass fiber reinforced PPS composites offer significant advantages, particularly in terms of lightness, corrosion resistance, ease of production, and environmental benefits. In this respect, the study provides a scientific contribution to the use of thermoplastic composites as an alternative material to conventional metals in the faucet industry.
Benzer Tezler
- Termoplastik kompozitlerde elektriksel ve termal özelliklerin nano malzemeler kullanımıyla geliştirilmesi
Improvement of electrical and thermal properties in thermoplastic composites by using nano materials
EZGİ UÇAR
Doktora
Türkçe
2025
Kimya MühendisliğiYıldız Teknik ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
PROF. DR. ELÇİN YILMAZ
DR. MUSTAFA DOĞU
- The production of chopped glass fiber reinforced PPS composite via extrusion and injection moulding and characterization studies
Kırpık cam elyaf takviyeli PPS matrisli kompozitin extrüzyon ve enjeksiyon ile üretimi ve karakterizasyon çalışmaları
FEYZA ZENGİN
Yüksek Lisans
İngilizce
2020
Polimer Bilim ve TeknolojisiMarmara ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. ARİF NİHAT GÜLLÜOĞLU
DR. MEHMET MASUM TÜNÇAY
- Optimization of process parameters for out-of-autoclave thermoplastic composite manufacturing
Otoklav dışı termoplastik kompozit üretimi için proses parametrelerinin optimizasyonu
SEVİNÇ ORMAN
Doktora
İngilizce
2025
Kimya MühendisliğiYıldız Teknik ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
PROF. DR. BELMA ÖZBEK
DR. MUSTAFA DOĞU
- Yüksek performanslı termoplastik kompozitler için otomatik elyaf serim/sarım sistemleri ile profil üretim yöntemi geliştirilmesi
Development of profile production method with automatic fiber laying/winding systems for high performance thermoplastic composites
PINAR KARBUZ PIRIKOĞLU
Doktora
Türkçe
2025
Kimya MühendisliğiYıldız Teknik ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
PROF. DR. BELMA ÖZBEK
DR. MUSTAFA DOĞU
- Termoplastik keçe katmanın karbon kumaş-cam kumaş/ epoksi kompozitlerde mekanik özelliklerine ve dinamik davranışlarına etkilerinin incelenmesi
Investigation of the effects of thermoplastic veil layer on mechanical properties and dynamic behavior in carbon fabric-glass fabric/epoxy composites
YAVUZ SELİM TARİH
Doktora
Türkçe
2022
Makine MühendisliğiAtatürk ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. ÖMER GÜNDOĞDU
DOÇ. DR. ADEM YAR