İndüksiyon işleminin rot başı ve rotillerin, mafsal millerinde kullanılan çeliklere ve kükürtün indüksiyon işlemine etkisinin incelenmesi
Investigation of the effect of induction process on the steels used in the rod end and ball joints, of ball pins and sulfur on the induction process
- Tez No: 973475
- Danışmanlar: PROF. DR. SERKAN TOROS
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2025
- Dil: Türkçe
- Üniversite: Niğde Ömer Halisdemir Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Yapılan bu çalışmada, mafsal millerinde kullanılan 41Cr4, 41CrS4, 42CrMo4 ve 42CrMoS4 çeliklerinin indüksiyon yüzey sertleştirme işlemi sonrası mekanik özelliklerindeki değişim ve kükürtün indüksiyon yüzey sertleştirme işlemi üzerindeki etkisi araştırılmıştır. Islah işlemi yapılan çeliklerden mafsal milleri, çekme numuneleri ve yorulma numuneleri üretilmiştir. Üretilmiş olan numunelere indüksiyon yüzey sertleştirme işlemi uygulanmıştır. Mafsal millerindeki en önemli imalat adımlarından biri olan indüksiyon işlemi ile sertleştirilmiş mafsal millerinin radyal kuvvet dayanımını ölçmek için eğilme testi yapılmıştır. Çekme testi numunelerinin mekanik özelliklerindeki değişimi ve kükürtün etkisinin incelenmesi için çekme testi yapılmıştır. Rot başına montajlanmış olan mafsal milleri, yorulma testine tabi tutulmuştur. Yorulma test numunelerine yorulma testi uygulanmıştır. Testler sonucunda, mekanik özelliklerdeki değişim ve yorulma testleri dikkate alındığında, kükürtün indüksiyon yüzey sertleştirme işlemi üzerinde olumsuz etkiye sahip olduğu gözlemlenmiştir.
Özet (Çeviri)
In this study, the changes in the mechanical properties of 41Cr4, 41CrS4, 42CrMo4 and 42CrMoS4 steels used in joint shafts after the induction surface hardening process and the effect of sulfur on the induction surface hardening process were investigated. Ball pins, fatigue samples and tensile samples were produced from the steels that underwent the quenching process. Induction surface hardening process was applied to the produced samples. A bending test was performed to measure the radial force resistance of the ball pins hardened with the induction process, which is one of the most important manufacturing steps in ball pins. Tensile test was performed to examine the changes in the mechanical properties of the tensile test samples and the effect of sulfur. Ball pins mounted on the rod ends were subjected to fatigue test. Fatigue tests were applied to fatigue test specimens. As a result of the tests, considering the change in mechanical properties and fatigue tests, it was observed that sulfur had a negative effect on the induction surface hardening process.
Benzer Tezler
- Rod başlarında indüksiyon yüzey sertleştirme işleminin ömür ve mekanik kuvvet dayanımlarına etkisi
Effects of the induction process on the rod end materials for fatigue life and mechanical forces strength
KAYHAN ALTINEL
Yüksek Lisans
Türkçe
2015
Makine MühendisliğiNiğde ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. SERKAN TOROS
- İndüksiyon ısıtma sistemlerinde kesir dereceli PID yöntemi ile sıcaklık denetimi
Temperature control with fractional PID method in induction heating systems
MUHAMMED ZEKİ İNANÇ
Yüksek Lisans
Türkçe
2025
Elektrik ve Elektronik MühendisliğiVan Yüzüncü Yıl ÜniversitesiElektrik ve Elektronik Mühendisliği Ana Bilim Dalı
DOÇ. DR. ÖZKAN ATAN
- Sürekli indüksiyon ısıtma sisteminin kurulumu ve vişne suyunun ısıtılmasında uygulanabilirliğinin deneysel ve kuramsal olarak incelenmesi
Setting up continuous induction heating system, and investigation of its applicability for heating of cherry juice experimentally and mathematically
ORHAN KAYA
Yüksek Lisans
Türkçe
2019
Gıda MühendisliğiEge ÜniversitesiGıda Mühendisliği Ana Bilim Dalı
PROF. DR. FİLİZ İÇİER
- İndüksiyon ile sinterlenmiş alüminyum esaslı kompozit malzemelerin yaşlandırma davranışının incelenmesi
Investigation of aging behavior of induction sintered aluminum based composite materials
BÜŞRANUR KESER
Yüksek Lisans
Türkçe
2024
Makine MühendisliğiManisa Celal Bayar ÜniversitesiMakine ve İmalat Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ SELDA KAYRAL
DR. GÜRKAN SOY
- Manyetik indüksiyon ile ısıtma olgusunun sonlu eleman metoduyla incelenmesi
Investigation of magnetic induction heating using finite element method
ÖNDER SÖNMEZ
Yüksek Lisans
Türkçe
2022
Fizik ve Fizik MühendisliğiAkdeniz ÜniversitesiFizik Ana Bilim Dalı
DR. ÖĞR. ÜYESİ DENİZ KAYA