B4C, CNT takviyeli Al-Mg nanokompozitinin toz metalurjisi yöntemi ile üretilmesi
Production of B4C, CNT reinforced Al-Mg nanocomposite by powder metallurgy method
- Tez No: 993875
- Danışmanlar: PROF. DR. GÜL TOSUN
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: Alüminyum matrisli kompozitler, Aluminum matrix composites
- Yıl: 2026
- Dil: Türkçe
- Üniversite: Fırat Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Makine Mühendisliği Teknolojileri Bilim Dalı
- Sayfa Sayısı: Belirtilmemiş.
Özet
Bu yüksek lisans tezi çalışmasında, B4C ve CNT takviyeli Al-Mg Nanokompozitinin toz metalurjisi yöntemi ile üretimi ve karakterizasyonu incelenmiştir. Çalışmanın amacı, nanokompozitlerin mekanik ve fiziksel özelliklerini iyileştirmek, optimum takviye oranlarını belirlemek ve porozite oluşumunu kontrol etmektir. Bu amaçla, farklı oranlarda B4C ve CNT tozları ile Al-Mg alaşım tozları karıştırılarak, toz metalurjisi yöntemi ile nanokompozitler üretilmiştir. Üretim parametrelerinin etkisi araştırılmış ve optimum sinterleme sıcaklığı, süresi ve atmosferi belirlenmiştir. Üretilen kompozitlerin mikro yapıları, fazları ve mekanik özellikleri, taramalı elektron mikroskobu (SEM), enerji dağılımlı X-ışını spektroskopisi (EDX) ve mekanik testler ile karakterize edilmiştir. Elde edilen sonuçlar, B4C ve CNT takviyelerinin nanokompozitlerin sertliğini, aşınma direncini ve mukavemetini önemli ölçüde değiştirdiğini göstermiştir. Optimum takviye oranları belirlenmiş ve porozite oluşumunu minimize etmek için uygun üretim parametreleri tespit edilmiştir. Bu çalışma, B4C ve CNT takviyeli Al-Mg nanokompozitlerin toz metalurjisi yöntemi ile üretilebileceğini ve bu kompozitlerin üstün mekanik ve fiziksel özelliklere sahip olduğunu göstermiştir. Elde edilen sonuçlar, nanokompozitlerin havacılık, otomotiv ve savunma sanayi gibi alanlarda kullanım potansiyeline ışık tutmaktadır.
Özet (Çeviri)
This master's thesis investigates the production and characterization of B4C and CNT-reinforced Al-Mg nanocomposites using powder metallurgy. The aim of the study is to improve the mechanical and physical properties of nanocomposites, determine optimum reinforcement ratios, and control porosity formation. For this purpose, nanocomposites were produced by mixing B4C and CNT powders with Al-Mg alloy powders in different ratios using the powder metallurgy method. The effect of production parameters was investigated, and the optimum sintering temperature, time, and atmosphere were determined. The microstructures, phases, and mechanical properties of the produced composites were characterized using scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and mechanical tests. The results showed that B4C and CNT reinforcements significantly altered the hardness, wear resistance, and strength of the nanocomposites. Optimum reinforcement ratios were determined, and suitable production parameters were identified to minimize porosity formation. This study demonstrates that B4C and CNT reinforced Al-Mg nanocomposites can be produced by powder metallurgy and that these composites possess superior mechanical and physical properties. The results shed light on the potential use of nanocomposites in fields such as aerospace, automotive, and defense industries.
Benzer Tezler
- Mekanik alaşımlama ile üretilen B4C ve CNT partikül takviyeli Al7XXX(Al-Zn-Mg) matris malzemesinin mikroyapı, mekanik ve elektriksel özelliklerinin incelenmesi
Investigation of the microstructural, mechanical and electrical properties of B4C and CNT particle reinforced Al7XXX(Al-Zn-Mg) matrix material manufactured by mechanical alloying
KEMAL DOĞAN
Doktora
Türkçe
2023
Metalurji MühendisliğiSelçuk ÜniversitesiNanoteknoloji ve İleri Malzemeler Ana Bilim Dalı
PROF. DR. MUSTAFA ACARER
DOÇ. DR. YASİN RAMAZAN EKER
- AA2024 esaslı nanopartikül takviyeli hibrit kompozit yatak malzemelerinin üretimi ve tribolojik özelliklerinin incelenmesi
Production of AA2024 based nanoparticle reinforced hybrid composite bearing materials and investigation of tribological properties
MÜSLİM ÇELEBİ
Doktora
Türkçe
2024
Metalurji MühendisliğiKaradeniz Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. AYKUT ÇANAKÇI
- Monolitik ve takviyeli borkarbür seramiklerin spark plazma sinterleme (SPS) yöntemi ile üretimi ve karakterizasyonu
Production and characterization of monolithic and reinforced boroncarbide ceramics prepared by spark plasma sintering (SPS)
BARIŞ YAVAŞ
Yüksek Lisans
Türkçe
2014
Seramik Mühendisliğiİstanbul Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. GÜLTEKİN GÖLLER
- Farklı takviyelerle güçlendirilmiş bakır esaslı kompozitlerin toz metalurjisi yöntemi ile üretimi ve analizleri
Production and analyses of copper based composites reinforced with different reinforcements by powder metallurgy method
GAMZE İSPİRLİOĞLU KARA
Doktora
Türkçe
2023
Makine MühendisliğiAtatürk ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DOÇ. DR. SİNAN SEZEK
PROF. DR. BÜNYAMİN AKSAKAL
- CrCoNiFeMo katkılı B4C matrisli kompozitlerin SPS ile üretimi ve karakterizasyonu
Production and characterization of B4C matrix with addition of CrCoNiFeMo composites by SPS
BURAK ÇAĞRI OCAK
Doktora
Türkçe
2023
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. GÜLTEKİN GÖLLER