Montaj sistemlerinde parça besleme için merkezi ve merkezi olmayan depolama konumları ile tesis içi lojistik kararlarının entegre optimizasyonu
Integrated optimization of centralized and decentralized storage locations and in-house logistics decisions for part feeding in assembly systems
- Tez No: 996656
- Danışmanlar: DOÇ. DR. BİLAL ERVURAL
- Tez Türü: Yüksek Lisans
- Konular: Endüstri ve Endüstri Mühendisliği, Industrial and Industrial Engineering
- Anahtar Kelimeler: Depo yönetimi, Warehouse management
- Yıl: 2026
- Dil: Türkçe
- Üniversite: Necmettin Erbakan Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Endüstri Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Tesis içi depolama süreçleri, özellikle üretim ve montaj sistemlerinde operasyonel verimliliğin kritik bileşenleridir. Bu süreçlerin etkin yönetilememesi zaman kayıplarına ve yüksek maliyetlere yol açarken, etkili bir depolama yönetimi malzeme akışını iyileştirir, gecikmeleri azaltır ve maliyetleri düşürür. Bu çalışma, depolama yönetimi ile montaj hatlarında parça besleme sürecini entegre ederek tesis içi lojistik süreçlerini optimize etmeyi amaçlamaktadır. Bu tez çalışmasında, bir tesis içerisinde yer alan montaj hattında, sınıf tabanlı bir depolama politikası benimsenmiştir. Geliştirilen entegre matematiksel model; tesis içi parça besleme ve depolama kararlarını bir arada ele alarak uygulanabilir ve maliyet etkin bir optimizasyon yapısı sunmaktadır. Çalışma kapsamında, istasyon bloklarının ataması ve taşıma aracı seçimleri, merkezi depoda sınıf tabanlı depolama politikasına dayalı yerleşim kararları ile entegre edilmiştir. Bununla birlikte modelde, tesis içerisinde, Merkezi Depo, süpermarket ve istasyon döngüsündeki sınıf bazlı parça besleme çevrimlerinin optimize edilmesi amaçlanmıştır. Bu amaçla, model, sınıfların merkezi depo bölümlerine atanması ve sınıf bazlı çevrim sıklığının belirlenmesi olmak üzere iki kararla genişletilmiştir. Modelde amaç fonksiyonu; Merkezi depo ile süpermarket ve süpermarket ile istasyon arası taşıma maliyetlerinin yanında, sabit tur giderlerini, süpermarket maliyetlerini ve çevrim maliyetlerini bütüncül şekilde minimize etmektedir. Önerilen model, toplam taşıma ve depolama maliyetlerini en aza indirmeyi hedeflerken, yalın üretim ilkeleriyle tam uyumlu, esnek ve düşük stoklu bir yapı sunmaktadır. Böylece, tam zamanında üretim anlayışını destekleyen, sürdürülebilir ve uygulanabilir bir tesis içi lojistik çözümü önerilmektedir.
Özet (Çeviri)
On-site storage processes are critical components of operational efficiency, particularly in production and assembly systems. While ineffective management of these processes leads to lost time and high costs, effective storage management improves material flow, reduces delays, and lowers costs. This study aims to optimize on-site logistics processes by integrating storage management with the parts supply process on assembly lines. In this thesis, a class based storage policy was adopted on an assembly line located within a facility. The developed integrated mathematical model offers a feasible and cost-effective optimization structure by considering in-site parts supply and storage decisions together. Within the scope of the study, the assignment of station blocks and the selection of transportation vehicle were integrated with layout decisions based on the class based storage policy in the central warehouse. Furthermore, the model aimed to optimize class based part supply cycles within the facility in the central warehouse, supermarket and station cycle. To this end, the model was expanded with two decisions: the assignment of classes to central warehouse sections and the determination of class based cycle frequency. The objective function in the model is; in addition to transportation costs between the central warehouse and supermarket and between supermarket and stations, it holistically minimizes fixed tour costs, supermarket costs, and distance costs. The proposed model aims to minimize total transportation and inventory costs while offering a flexible, low-inventory structure that is fully compatible with lean manufacturing principles. Thus, a sustainable and viable in-plant logistics solution that supports just-in-time manufacturing is proposed.
Benzer Tezler
- Otomotiv sektöründe parça lojistiği için bir karar destek sistemi önerisi
A decision support system proposal for part logistics in the automotive sector
MEVLÜT UYSAL
Doktora
Türkçe
2020
Endüstri ve Endüstri MühendisliğiGazi ÜniversitesiYönetim Bilişim Sistemleri Ana Bilim Dalı
DOÇ. DR. UĞUR ÖZCAN
- La proposition D'Un modéle de direction et de l'organisation pour le secteur de sous industrie de l'automobile Turque
Türk otomotiv yan sanayi için yönetim ve organizasyon modeli önerisi
SERKAN ANDI
Yüksek Lisans
Fransızca
2004
Endüstri ve Endüstri MühendisliğiGalatasaray ÜniversitesiEndüstri Mühendisliği Ana Bilim Dalı
PROF.DR. ETHEM TOLGA
- Force control of Stäubli RX-160 manipulator
Stäubli RX-160 manipülatörünün kuvvet kontrolü
SERHAT AKBAŞ
Yüksek Lisans
İngilizce
2015
Mekatronik Mühendisliğiİstanbul Teknik ÜniversitesiMekatronik Mühendisliği Ana Bilim Dalı
DOÇ. DR. ZEKİ YAĞIZ BAYRAKTAROĞLU
- Stok yönetim sistemlerinde Endüstri 4.0 uygulamalarının gerçekleştirilmesi: Bir otomotiv firmasında komisyonlama (parça toplama-montaj hatlarına parça besleme) yönteminin dijitalleştirilmesi
Realization of Industry 4.0 applications in stock management systems: Digitalization of a part picking method for assembly lines in an automotive company
ENDER PAK