Geri Dön

Bükme saç profillerle konut üretimi ve Türkiye'de uygulanabilirliği

House construction using light gauge steel and its applicability in Turkey

  1. Tez No: 133129
  2. Yazar: İLKER SALİH CANITEZ
  3. Danışmanlar: PROF.DR. HAKKI ÖNEL
  4. Tez Türü: Yüksek Lisans
  5. Konular: Mimarlık, Architecture
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2002
  8. Dil: Türkçe
  9. Üniversite: Trakya Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Mimarlık Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 117

Özet

ÖZET Bu çalışmada çelik malzemenin ve Bükme Saç Profillerle Konut Üretimi sisteminin yapı üretiminde kullanımının getireceği yararlılıklar irdelenerek sistemin tanıtılması amaçlanmıştır. Çalışmanın bir diğer amacı ise Ülke genelinde gereksinim duyulan depreme dayanıklı, kalite ve konfor ilkelerine uygun olduğu ölçüde ekonomik çözümler de sunabilecek konutların bu sistem kullanılarak üretilebileceği varsayımının sorgulanmasıdır. Çalışmanın sonucunda Bükme Saç Profillerle Konut Üretimi sisteminin doğru olarak uygulanması durumunda kaliteli, hızlı, güvenilir ve ekonomik çözümler sunabileceği, anlaşılmakta bununla beraber üretim süreci boyunca büyük ölçüde yurt dışından getirilen standart ve ayrıntıların ülke koşullarına uygunluğunun yeterince sorgulanmaksızın kullanıldığı ortaya çıkmaktadır. Sistemin Türkiye'de bilinçli ve doğru olarak uygulanabilmesi için sektörün her düzeyde bilgilenmesi ve yeni araştırma-geliştirme çalışmaları yapılması gerekmektedir.

Özet (Çeviri)

11 SUMMARY Throughout this study it has been aimed to present the system via examining the usefulness of steel material and light gauge steel on building construction. Another aim of the study is to question the hypothesis of construction by using this system with appropriate principles of resistance, quality and comfort in case of an eartquake in the country as well as using it for its being economical. As the result of the study; it has been figured out that solutions of good quality, rapidness, reliability and economy can be offered in condition that the system is applied properly. Nevertheless; throughout the construction period, the problem of not questioning the standards and details provided from outside the coutry sufficiently came out, on the basis of their being proper or improper to the country conditions. To apply the system consciously and properly in Turkey the sector has to be well-informed in all levels and new studies of research and progress should be made.

Benzer Tezler

  1. Makaralı bükme işleminde ince sacların kenar dalgalanma kusurunun deneysel incelenmesi ve sonlu elemanlar yöntemi ile analizi

    Experimental investigation and finite element analysis of edge waviness defect during cold roll forming of thin sheet metal

    OSMAN ELDAR DÖNMEZ

    Doktora

    Türkçe

    Türkçe

    2007

    Makine Mühendisliğiİstanbul Teknik Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    DOÇ. DR. HİKMET KOCABAŞ

  2. Kalıplar için kesici zımba ucu geliştirilmesi

    Development of a cutting punch tool for stamping dies

    BAHTİYAR TAŞKIN

    Yüksek Lisans

    Türkçe

    Türkçe

    2020

    Makine MühendisliğiBursa Uludağ Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    PROF. DR. KADİR ÇAVDAR

  3. Hafif çelik sistem taşıyıcı kurgusu

    Light steel system bearing assembly

    REHAL SİYAHHAN

    Yüksek Lisans

    Türkçe

    Türkçe

    2005

    MimarlıkYıldız Teknik Üniversitesi

    Mimarlık Ana Bilim Dalı

    PROF.DR. GÖRÜN ARUN

  4. Betonarme ve çelik hafif taşıyıcılı yapı sistemlerinin kaba yapı aşamasında maliyetlerinin irdelenmesi

    The Cost comparison between reinforced concrete and light steel structural systems at the phase of coarse structure

    EMEL BALCI

    Yüksek Lisans

    Türkçe

    Türkçe

    2003

    Mimarlıkİstanbul Teknik Üniversitesi

    Yapı Bilgisi Ana Bilim Dalı

    DOÇ. DR. BİLGE IŞIK

  5. Gererek bükme proses parametrelerinin sonlu elemanlar yöntemi ile incelenmesi

    Investigation of stretch bending process parameters using finite element method

    HİLAL ŞOGEN

    Yüksek Lisans

    Türkçe

    Türkçe

    2022

    Makine MühendisliğiBursa Teknik Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    DOÇ. DR. ONUR SARAY