Geri Dön

Study of finned tube energy storage systems

Kanatlı boru ile enerji depolama sistemleri

  1. Tez No: 138829
  2. Yazar: MEHMET ALİ ACAR
  3. Danışmanlar: PROF. DR. NURİ KAYANSAYAN
  4. Tez Türü: Yüksek Lisans
  5. Konular: Makine Mühendisliği, Mechanical Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2003
  8. Dil: İngilizce
  9. Üniversite: Dokuz Eylül Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Enerji Bilim Dalı
  13. Sayfa Sayısı: 91

Özet

m ÖZET Faz Değişim Malzemesi (FDM) kullanan gizli ısı depolama sistemleri, katılaşma veya erime yoluyla büyük miktarda enerji depolamak için etkili bir yoldur. Boru- kovan tipi ısı değiştirgeçleri, küçük hacimlerde yüksek verimlere ulaşabildiğinden gizli enerji depolama sistemleri için en uygun değiştirgeç tipi olarak kabul edilmiştir. Bu tip bir ısı değiştirgecinde FDM kovanı doldurur ve ısı tranfer akışkanı boruların içinden akar. Gizli ısı depolama sisteminde ısı transferini artırmak için değişik yöntemler uygulanmıştır. Değişik geometrilerdeki kanatlı boruların kullanımı, birçok araştırmacı tarafından gizli ısı depolama sisteminin verimini artıran bir etken olarak gösterilmiştir. Bu çalışmada, radyal kanatlı yatay bir boru etrafındaki iki boyutlu faz değişimi sayısal ve deneysel olarak incelenmiş, akış ve geometrik parametrelerin enerji depolamaya etkileri incelenmiştir. Ayrıca, sayısal sonuçların deneysel verilerle karşılaştırması yapılarak sayısal modelin uygunluğu gösterilmiştir. Anahtar kelimeler : Enerji depolama, faz değişimi, katılaşma, radyal kanatlı borular.

Özet (Çeviri)

ABSTRACT A latent heat thermal energy storage system using a phase change material (PCM) is an efficient way of storing or releasing a large amount of heat during melting or solidification. It has been determined that the shell-and-tube type heat exchanger is the most promising device as a latent heat storage system that requires high efficiency for a minimum volume.. In this type of heat exchanger, the PCM fills the annular shell space around the tube while the heat transfer fluid flows within the tube. There are several methods to enhance the heat transfer in a latent heat storage system. The use of finned tubes with different configurations has been proposed by various researchers as an efficient means to improve the charge / discharge capacity of a latent heat storage system. In this study, numerical and experimental investigations are performed for the two-dimensional phase change phenomena around a horizontal radially finned tube. The effects of flow and geometrical parameters on energy storage are investigated. Moreover, a comparison between the numerical results and the experimental data is provided. Keywords : Energy storage, phase change, solidification, radially finned tubes.

Benzer Tezler

  1. Bir ısıl enerji depolama sisteminde dönme hızının ve kanat sayısının değişiminin ısıl performans üzerindeki etkilerinin deneysel olarak incelenmesi

    Experimental investigation of the effects of change ofrotation speed and number of blades on thermal performance in a thermal energy storage system

    ERAY ZAĞLANMIŞ

    Yüksek Lisans

    Türkçe

    Türkçe

    2022

    EnerjiKırıkkale Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ TOLGA DEMİRCAN

  2. Isı enerjisinin geri kazanılması

    Heat recovery

    İBRAHİM DAĞ

    Yüksek Lisans

    Türkçe

    Türkçe

    1994

    Makine Mühendisliğiİstanbul Teknik Üniversitesi

    DOÇ.DR. İ. CEM PARMAKSIZOĞLU

  3. Phase change around a radially finned horizontal cylinder: a conjugate problem

    Yatay radyal kanatlı bir boru çevresinde faz değişimi: Bir birleşik problem

    AYTUNÇ EREK

    Doktora

    İngilizce

    İngilizce

    1999

    Makine MühendisliğiDokuz Eylül Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    PROF. DR. NURİ KAYANSAYAN

  4. Helisel kanatlı ısıtıcı bulunan silindirik kapta faz değiştiren madde ile ısıl enerji depolanmasının deneysel incelenmesi

    Experimental investigation of thermal energy storage with phase change material embedded with helical finned heater inside a cylindrical container

    TOLGA ALTINOLUK

    Yüksek Lisans

    Türkçe

    Türkçe

    2018

    Enerjiİstanbul Teknik Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    PROF. DR. MUSTAFA ÖZDEMİR

  5. Melting of a phase change material on a finned-tube heat exchanger

    Kanatlı boru tipi bir ısı eşanjörünün üzerindeki bir faz değişim malzemesinin erimesi

    KAMBER NACİ ÜSTÜNER

    Yüksek Lisans

    İngilizce

    İngilizce

    2007

    EnerjiDokuz Eylül Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    Y.DOÇ.DR. TAHSİN BAŞARAN