Geri Dön

The Design of a 3 MTY capacity coal washery for the benefication of Eynez-Soma coal district

Başlık çevirisi mevcut değil.

  1. Tez No: 14011
  2. Yazar: YILDIZ YURTÖZVERİ
  3. Danışmanlar: DOÇ.DR. ALİ AKAR
  4. Tez Türü: Yüksek Lisans
  5. Konular: Maden Mühendisliği ve Madencilik, Mining Engineering and Mining
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 1991
  8. Dil: İngilizce
  9. Üniversite: Dokuz Eylül Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Belirtilmemiş.
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 73

Özet

Özet yok.

Özet (Çeviri)

ABSTRACT According to the increase in industrial production, the development in science and technology, the population explosion and the increase of the standards of living, the energy requirements increase year by year. In countries all over the world, the 1/3 of the consumed energy is provided from coal reserves. Also in our country, it is estimated that there will be 19 million tons of coal requirement in 1991. Our country has a lignite reserve of 8.5 billon tons. But unfortunately, our low ashy and low sulphured lignite isn't enough. These lignite resourses, which are suitable for washing processing should be processed with the most suitable method getting the less amount of waste. For this reason the cost of the high quality household coal which is processed from the Soma coal should be estimated. In this project a washing plant feasibility study is made to process the Onen_Eynez lignite which has the most amount of reserve in Soma region. The general properties of the Eynez lignite, used in study, are taken from reference (2). Due to the data a processing plant flowsheet is produced depending on a 3,000,000 tons/a capacity. The dimensioning and cost estimations of the selected equipments are also done in the project. In addition to this, the economic analysis of the investment is also done using the total investment costs and operation costs. At the end of the study it is seen that, the added expenses of the processing operation are not so much as they are expected. Moreover, it is seen that the profit of the processing is very much when it is considered that the air polluting properly, threatening human health, is increased by this plant. It should also be considered tahat the cost of transporting the ash of the run_ofjmine coal to the place where it will be used and transporting of the trash of the ash by the local goverments are lowered. With a global approachment, this 70 % profitable will also be big resource for the economy of our country.

Benzer Tezler

  1. Design of stacker crane for mini-load automated storage and retrieval systems

    Otomatik depolama ve boşaltma sistemi istifleyici vinç tasarımı

    MUSTAFA BEKLEVİÇ

    Yüksek Lisans

    İngilizce

    İngilizce

    2022

    Makine Mühendisliğiİzmir Yüksek Teknoloji Enstitüsü

    Makine Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ ŞENAY MİHÇİN

  2. Üç eksenli robot kol tasarımı ve robot kolun kontrolü için EEG verilerinin makine öğrenmesi ile sınıflandırılması

    Design of a 3-axis robot arm and classification of EEG data with machine learning to control the robot arm

    KAAN ASLIM

    Yüksek Lisans

    Türkçe

    Türkçe

    2024

    Elektrik ve Elektronik MühendisliğiHaliç Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ GÖKÇE AKGÜN

  3. Design of a 3 GS/s current steering DAC

    12-bit 3 GS/s akım anahtarlamalı DAC tasarımı

    SEYHAN ÇALIŞKAN

    Yüksek Lisans

    İngilizce

    İngilizce

    2016

    Elektrik ve Elektronik MühendisliğiBoğaziçi Üniversitesi

    Elektrik-Elektronik Mühendisliği Ana Bilim Dalı

    PROF. DR. GÜNHAN DÜNDAR

  4. Küf dekontaminasyonu için akışkan yatak atmosferik basınç plazma reaktörü tasarımı

    The design of a fluidized bed atmospheric pressure plasma reactor for mold decontamination

    BEYHAN GÜNAYDIN DAŞAN

    Doktora

    Türkçe

    Türkçe

    2015

    Gıda MühendisliğiHacettepe Üniversitesi

    Gıda Mühendisliği Ana Bilim Dalı

    PROF. DR. İSMAİL HAKKI BOYACI

  5. Rotoru nüveli, eksenel ve radyal akili, kalıcı mıknatıslı yeni bir jeneratör tasarımı

    The design of a new permanent magnet axial and radial flux generator with rotor back-irons

    UMUT DÖNER

    Yüksek Lisans

    Türkçe

    Türkçe

    2016

    Elektrik ve Elektronik MühendisliğiGazi Üniversitesi

    Elektrik-Elektronik Mühendisliği Ana Bilim Dalı

    PROF. DR. EROL KURT