Geri Dön

Polipirol yapısının elektrokimyasal ve spektroskopik yöntemlerle incelenmesi ve polipirole GAMA ışınlarının etkisi

Başlık çevirisi mevcut değil.

  1. Tez No: 172947
  2. Yazar: MERAL ARCA
  3. Danışmanlar: PROF.DR. ATTİLA YILDIZ
  4. Tez Türü: Yüksek Lisans
  5. Konular: Kimya, Chemistry
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 1986
  8. Dil: Türkçe
  9. Üniversite: Hacettepe Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Kimya Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 111

Özet

III ÖZET Bu çalışmada susuz ve değişik oranlarda su içeren aseto- nitril ve tetraetil amonyum tetraf loroborat ortamında pirol monomerinin, Pt çalışma elektrodu üzerine elektroyük- seltgenmesi ile polipirol filmleri elde edildi. Bu filmlerin elektrokimyasal davranışı Dönüşümlü Voltametri yöntemi ile (0.0) -(+1.0) v arasında ferrosenin elektroyükseltgenme- si (0.0) -(-1.0) V arasında benzokinonun elektroindirgenme- si ile incelendi. Hiçbir çözücüde çözünmeyen bu polimerin kuru haldeki iletkenliği Dörtlü Uç (Four Probe) tekniği ile ölçüldü. Bu polimerin FTIR spektrumları 5 havada ve vakumda ESR spektrumları incelendi ve Termogravimetrik. analizleri yapıldı. Optik mikroskopi ile film yüzeylerinin gözenek yapısı incelendi. y ışınlarının polipirole etkisi incelenerek, y ışınları ile polipirole 4-vinilpiridin monomeri aşılandı. Elde edilen bu yeni kopolimerin özellikleri iletkenlik ölçümleri, FTIR spektrumları ve Termogravimetrik analizlerle araştırıldı. Elde edilen sonuçlardan polipirolün yapısının gözenekli ve polipirol elektrodu üzerinden benzokinonun elektroindirgenmesi ve ferrosenin elektroyükseltgenmesi sırasındaki elektron aktarımı mekanizmalarının farklı olduğu saptandı. Poliraerleşme sırasında ortamda suyun bulunması ile elde edilen polipirolün yapısının ve havadaki kararlılığının ortamda su olmadan hazırlanan polipirolden farklı olduğu bulundu. Y ışınlarının polipirolün iletkenliğini yaklaşık iki kat arttırdığı gözlendi. Ayrıca polipirol/poli 4-vinilpiridin kopolimerine dietilditiyokarbamat ligandının takılması ile bu elektrodun çözeltideki bakır iyonlarına duyarlı olabileceği gösterildi.

Özet (Çeviri)

XV SUMMARY In this study, polpyrrole films were obtained by electrooxidation of pyrrole on Pt working electrodes in acetonitrile /0.1 M tetraethyl tetraammonium tetraflouroborat medium in the absence and presence of various amounts of water. The electrochemical behaviors of these films were investigated using Cyclic Voltammetry by following electrooxidation of ferrocene in (0.0) -(+1.0) V and electroreduction of benzoquinone (0.0) -(-1.0) V intervals. Due to insolubility of this polymer in the existing solvents, its dry conductivity was measured by the Four-Probe technique. FTIR and vacuum and air ESR Spectra of this polymer were also taken, tn addition Thermogravimetric analysis of the electrolytically produced polymers were carried out. Optical microscopy was used to investigate the pore ^structure of the film surfaces. After investigating throughly the effects of y-rays on polyprrole, 4-vinlypyridine was grafted onto polypyrrole films by using y-rays. The properties of this new graft copolymer was investigated by FTIR spectroscopy, Thermogravimetryf Conductivity measurements. The results of this research showed that polyprrole has a porous structure and that the electroreduction of benzoquinone and the electrooxidation of ferrocene on polypyrrole electrode proceed through different electron transfer mechanisms. It was also found that the structure and the stability of polypyrrole obtained in the presence of water was completely different from that obtained in anhydrous systems. In was observed that irradiation with Y- rays increased the conductivity of polypyrrole by-a factor two. Furthermore, by coupling the ligand, diethyldithiocarbomate, with the polypyrrole/poly 4-vinilpyridine copolymer, it was demonstrated that this electrod could be made sensitive towards copper ions in solution.

Benzer Tezler

  1. Development of multi-layer conductive polymer nanocomposites for electromagnetic shielding application

    Elektromanyetik kalkanlama uygulamaları için katmanlı iletken polimer nano kompozitlerinin geliştirilmesi

    FATMA ZEHRA ENGİN SAĞIRLI

    Doktora

    İngilizce

    İngilizce

    2017

    Bilim ve Teknolojiİstanbul Teknik Üniversitesi

    Malzeme Bilimi ve Mühendisliği Ana Bilim Dalı

    PROF. DR. EYÜP SABRİ KAYALI

    PROF. DR. ABDÜLKADİR SEZAİ SARAÇ

  2. Investigation of capacitive behaviour of emulsion polymerized pedot and its nanocomposites

    Emülsiyon polimerizasyonu ile sentezlenen pedot ve nanokompozitlerinin kapasitif özelliklerinin incelenmesi

    DENİZ GÜLERCAN

    Doktora

    İngilizce

    İngilizce

    2019

    Polimer Bilim ve Teknolojisiİstanbul Teknik Üniversitesi

    Polimer Bilim ve Teknolojisi Ana Bilim Dalı

    PROF. DR. ABDÜLKADİR SEZAİ SARAÇ

  3. Fabrication and characterization of P3HT-WO3 hybrid thin films and device applications

    P3HT-WO3 hibrit ince filmlerin üretimi, karakterizasyonu ve cihaz uygulamaları

    FATMA BEYZA YEDİKARDEŞ ER

    Doktora

    İngilizce

    İngilizce

    2024

    Kimyaİstanbul Teknik Üniversitesi

    Nanobilim ve Nanomühendislik Ana Bilim Dalı

    PROF. DR. ESRA ZAYİM

    PROF. DR. MUSTAFA ALTUN

  4. Electrospun polyacrylonitrile based composite nanofibers containing polyindole and graphene oxide

    Poliindol ve grafen oksit içeren poliakrilonitril tabanlı kompozit nanofiberler

    İLKNUR BOZKAYA GERGİN

    Doktora

    İngilizce

    İngilizce

    2023

    Polimer Bilim ve Teknolojisiİstanbul Teknik Üniversitesi

    Polimer Bilim ve Teknolojisi Ana Bilim Dalı

    PROF. DR. ABDÜLKADİR SEZAİ SARAÇ

  5. Poliviniliden florür/polipirol (PVDF/PPy) kompozitinin hazırlanması, karakterizaysonu ve glikoz sensörü olarak kullanımının araştırılması

    Preparation and characterization of polyvinylidene fluoride/polypyrrole (PVDF/PPy) composite and investigation of its use as a glucose sensor

    MEVLİT DEMA

    Yüksek Lisans

    Türkçe

    Türkçe

    2024

    Polimer Bilim ve TeknolojisiBurdur Mehmet Akif Ersoy Üniversitesi

    Malzeme Teknolojileri Mühendisliği Ana Bilim Dalı

    PROF. DR. SONGÜL ŞEN GÜRSOY