Geri Dön

Urartu silahları: Kılıç, hançer ve bıçaklar

Urartian weapons: Swords, daggers and knives

  1. Tez No: 188234
  2. Yazar: HANİFİ BİBER
  3. Danışmanlar: PROF. DR. VELİ SEVİN, DOÇ. DR. ÜNSAL YALÇIN
  4. Tez Türü: Doktora
  5. Konular: Tarih, History
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2005
  8. Dil: Türkçe
  9. Üniversite: Yüzüncü Yıl Üniversitesi
  10. Enstitü: Sosyal Bilimler Enstitüsü
  11. Ana Bilim Dalı: Arkeoloji Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 347

Özet

M. Ö. 8.-7. yüzyıllarda Urartu, Yakın Doğu'nun en güçlüimparatorluklarından ve en yaratıcı toplumlarından biriydi. Mimari, su mühendisliğive metalürji gibi konularda oldukça ileri düzeye ulaşmışlardı ve aynı zamanda kılıç,hançer, mızrak ve ok gibi güçlü silahlarla donatılmış bir orduya sahiplerdi.Bu doktora çalışmasında hem Van, Erzurum, Elazığ, Malatya ve İstanbulmüzelerinde ve hem de Altıntepe, Kalecik ve Karagündüz kazılarında ele geçenler,ayrıca bazı yayınlardan derlenen Urartu kılıç, hançer ve bıçakları incelenerek birkatalog oluşturulmuştur. Tüm Urartu materyali üzerindeki çalışmalardan sonrakatalog 69 kılıç, 6 hançer, 36 bıçak ve 20 kın olmak üzere toplam 131 eserdenmeydana getirilmiştir.Tipolojik analiz Urartu uygarlığında beş farklı kılıç tipi olduğuna işaret eder.Bunlar şöyle sıralanabilir: kabzası flanşlı kılıçlar; kabzası döküm kaplamalı kılıçlar;makara kabzalı kılıçlar ve geniş namlulu kılıçlar. Hançerler hilal tepelikliler vekabzası flanşlılar gibi iki farklı tipe ayrılmaktadır. Bıçaklar ise genel olarak eskiYakın Doğu'da sıkça kullanılan tiplerden oluşmaktadır.Eserlerin metalürjik incelemelerinde kabzalarda kullanılan tunç ilenamlularda kullanılan demir madenlerinin yapısı incelenmiş, metal yapısında varolan diğer elementlerin tespitine yönelik analizler gerçekleştirilmiştir.Yapılan tüm inceleme ve değerlendirmeler sonucunda; özellikle kılıç vehançer gibi Urartu saldırı silahlarının sivri tepelikli, kavrama çıkıntılı ve balçaklıkabza yapılarıyla, çağdaş kültürlerden çok farklı olduğu ve üretim tekniklerine göresadece Urartu'ya özgü olduğu kabul edilebilir. Bu çalışma, tunç kabza ve demirnamlulu bu kompozid kılıç ve hançerlerin teknolojik açıdan önemli gelişmeleribarındırdıkları, demirin çoğu zaman çelikleştirilerek kullanıldığı ve üretimin rennfırınlarında gerçekleştirildiğini de ortaya çıkarmıştır.

Özet (Çeviri)

Urartu was one of the most powerful empires and technologically innovativesocieties in the Near East durin eighth and seventh centuries B. C. They were highlyskilled in the fields of architecture, irrigation Works and metallurgy, and also have astrong army equipped with fierce weapons such as sword, rdagger, spear and arrow.In this present dissertation thesis a typological catalogue has beenaccomplished with the aid of the extant materials o the urartian swords, daggers andknives of both housed in the archaelogical museums of Van, Erzurum, Elazığ,Malatya and of unearhed from the excavations of Altıntepe, Kalecik andKaragündüz, including some publeshed specimens. After the analysis of the bulk ofthe Urartian material the catalogue has appeared to have 69 swords, 6 daggers, 36knives and 20 scabbards.The typological analysis suggest that five different sword types were presentin the Urartian realm. These are as fallows: flanged hilted swords; framed hiltedswords; bobin hilted swords; plated hilted swords (hilt made by cast-on process) andbroad bladed swords. The daggers can be classified into two distinct types: dagerswith splayed pomel and flanged hilted daggers. As to knives, they are usually smilarto the types widely prevalent in the ancient Near East.As a requirement of the metallurgical analysis the structures of the bronzeused in the production of the hilts and the iron used in the manifacture of the bladeswere analysed and some other analysis were also undertaken to discover the otherelements of the above stated bronzes.As a result of carefully undertaken studies and analysis it can be claimed thatthe Urartian swords and daggers technologically are different from the contemporarycivilisations of that time. This kind of swords can be accepted solely Urartiancreation according to their technique. The study has also revealed that the swords anddaggers composed of bronze hilts and iron blades form an important technologicaldevelopments of that time. Last but not least, the study has explored that the iron wastransformed into the steel and production of the weapons took place in the rennbakery by the Urartians.

Benzer Tezler

  1. Çavuştepe Kalesi 2014-2020 kazılarında ele geçen demir buluntular

    Iron findings recognized in Çavuştepe Fortress 2014-2020 excavations

    NESİM KILIÇ

    Yüksek Lisans

    Türkçe

    Türkçe

    2022

    ArkeolojiVan Yüzüncü Yıl Üniversitesi

    Arkeoloji Ana Bilim Dalı

    DOÇ. DR. İSMAİL COŞKUN

  2. Urartu Krallığı'nda urne gömü geleneği: Sosyo-kültürel bir yaklaşım

    The urn burial tradition in the Kingdom of Urartu: A socio-cultural approach

    YENAL SÜRÜN

    Doktora

    Türkçe

    Türkçe

    2024

    ArkeolojiVan Yüzüncü Yıl Üniversitesi

    Arkeoloji Ana Bilim Dalı

    PROF. DR. RAFET ÇAVUŞOĞLU

  3. Erzurum ve Kars Müzelerinde bulunan Urartu dönemi öncesine ait metal silahlar

    Pre-Urartian metallic weapons in Erzurum and Kars Museums

    GÜLŞAH ALTUNKAYNAK

    Doktora

    Türkçe

    Türkçe

    2016

    ArkeolojiAtatürk Üniversitesi

    Arkeoloji Ana Bilim Dalı

    PROF. DR. MEHMET IŞIKLI

  4. Yukarı Anzaf Kalesi demir silah ve aletleri

    Upper Part of Anzaf Castle iron weapon and tools

    NEVİN ULUSOY

    Yüksek Lisans

    Türkçe

    Türkçe

    2001

    Tarihİstanbul Üniversitesi

    Eskiçağ Tarihi Ana Bilim Dalı

    PROF. DR. OKTAY BELLİ

  5. Urartu dönemi tunç eser sanatı ve ayanis verilerinin değerlendirilmesi

    The art of bronze works in the Urartian period and an evaluation of the data from ayanis

    OĞUZ ARAS

    Doktora

    Türkçe

    Türkçe

    2022

    ArkeolojiAtatürk Üniversitesi

    Arkeoloji Ana Bilim Dalı

    PROF. DR. MEHMET IŞIKLI