Amperometric determination of ascorbic acid (vitamin C) by poly (vinylferrocene)-polypyrrole modified platinum electrode
Poli (vinilferrocen)-polipirol modifiye platin elektrodu ile askorbik asit (vitamin C) tayini
- Tez No: 197175
- Danışmanlar: PROF. DR. HALUK ÖZYÖRÜK
- Tez Türü: Yüksek Lisans
- Konular: Kimya, Chemistry
- Anahtar Kelimeler: Poli(vinilferrosenyum)-Polipirol modifiye elektrot, askorbikasit, amperometrik sensör, Poly(vinylferrocenium)-Polypyrrole modified electrode, ascorbic acid, amperometric sensor
- Yıl: 2005
- Dil: İngilizce
- Üniversite: Hacettepe Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Kimya Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 65
Özet
Bu çalışmada, 2 mg mL-1 poli(vinilferrosen) ve 20 mM pirol içeren metilen klorür/0.1 M TBAP çözücü/destek elektrolit sisteminde Ag/AgCl elektroduna karşı0.0 - +1.1 V arasında dönüşümlü voltametrik tarama ile oluşturulan bir modifiyeelektrot kullanarak askorbik asit için kararlı hal amperometrik ölçümleri yapıldı.Tarama sırasında elektrot yüzeyinde pirol polimerleşirken, poli(vinilferrosenyum)polimer tabakası oluşturuldu.En uygun amperometrik ölçüm koşulları olarak; pH= 5.0, 5 mM fosfat tamponu,DKE'ye karşı +0.5 V sabit potansiyel, dönüşümlü voltametrik 10 döngü ile eldeedilen kaplama kalınlığı, 20ºC ortam sıcaklığı, 20 mM pirol derişimi bulundu.PVF+PPy+ polimer elektrot yapısı yüksek iletkenlik özelliğiyle katalitik etkilerinibirleştirmiştir.
Özet (Çeviri)
In this study the steady state amperometric measurements of ascorbic acid wasperformed by a modified Pt electrode. The modified electrode was developedthrough cyclic voltammetric scans between 0.0 to +1.1V vs. Ag/AgCl electrode inmethylene chloride/0.1 M tetra-n-butyl ammonium perchlorate solvent/supportingelectrolyte system which contains 2 mg mL-1 poly(vinylferrocene) and 20 mMpyrrole. While scanning pyrrole was electropolymerized and poly(vinylferrocenium)was electroprecipitated onto the electrode surface.The most suitable amperometric measurement conditions were found as 5 mMphosphate buffer at pH 5.0, +0.5 V vs. SCE constant applied potential, 10 cyclesof scanning as the polymeric film thickness and 20ºC as the temperature of themedium, concentration of pyrrole in the polymer solution as 20 mM.The higher conductivity and mediator effects are combined in the PVF+PPy+modified electrode structure.
Benzer Tezler
- L-askorbik asit(c vitamini) tayinine yönelik olarak kalem grafit elektrot-askorbat oksidaz temelli yeni bir biyosensör geliştirilmesi
A new biosensor development based on pencil graphite electrode-ascorbate oxidase for determination of l-ascorbic acid(vitamin c)
BURHAN BUDAK
- Grafen temelli elektrokimyasal biyosensörlerin geliştirilmesi
Development of graphene based electrochemical biosensors
DURSUN YAŞAR BAYRAMLI
Doktora
Türkçe
2023
KimyaTokat Gaziosmanpaşa ÜniversitesiKimya Ana Bilim Dalı
PROF. DR. DURALİ MENDİL
PROF. DR. FİLİZ KURALAY
- Preparation and investigation of modified electrodes and applications to the new voltammetric techniques
Modifiye elektrodların hazırlanması, incelenmesi ve yeni voltametrik tekniklere uygulanması
ZEKERYA DURSUN
- Serotoninin elektrokimyasal tayinine yönelik tek kullanımlık sensör geliştirilmesi
Development of a di̇sposable sensor for the electrochemical determi̇nation of serotonin
TUĞBA ATICI
Yüksek Lisans
Türkçe
2023
KimyaÇankırı Karatekin ÜniversitesiKimya Ana Bilim Dalı
DOÇ. DR. MELİKE BİLGİ KAMAÇ
- Poli(tiyonin) destekli paladyum nanopartikülleri ile H2O2 tayini
Determination of H2O2 using poly(thionine) supported palladium nanopaticles
SONGÜL KIRLAK