Development of an incompressible Navier-Stokes solver with alternating cell direction implicit method on structured and unstructured quadrilateral grids
Yapısal ve yapısal olmayan dörtgen çözüm ağlarında değişken hücre yönlü kapalı metod kullanan sıkıştırılamaz Navier-Stokes çözücü geliştirilmesi
- Tez No: 201815
- Danışmanlar: DR. ALİ RUHŞEN ÇETE, PROF. DR. İSMAİL HAKKI TUNCER
- Tez Türü: Yüksek Lisans
- Konular: Havacılık ve Uzay Mühendisliği, Aeronautical Engineering
- Anahtar Kelimeler: Alternating Cell Direction Implicit Method, Artificial Compressibility Method, High Order, U-MUSCL, Unstructured, Quadrilateral
- Yıl: 2007
- Dil: İngilizce
- Üniversite: Orta Doğu Teknik Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Havacılık ve Uzay Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Özet yok.
Özet (Çeviri)
In this research, the Alternating Cell Direction Implicit method is used in temporal discreti- sation of the incompressible Navier-Stokes equations and compared with the well known and widely used Point Gauss Seidel scheme on structured and quadrilateral unstructured meshes. A two dimensional, laminar and incompressible Navier-Stokes solver is developed for this pur- pose using the artificial compressibility formulation. The developed solver is used to obtain steady-state solutions with implicit time stepping methods and a third order data reconstruc- tion scheme (U-MUSCL) is added to obtain high order spatial accuracy. The Alternating Cell Directions Implicit method and Point Gauss Seidel scheme is compared in terms of conver- gence iteration number and total computation time using test cases with growing complexity, including laminar flat plate, single and multi-element airfoil calculations. Both structured and quadrilateral unstructured grids are used in single element airfoil calculations. In these test cases, it is seen that a reduction between 13% and 20% is obtained in total computation time iv by usage of Alternating Cell Directions Implicit method when compared with the Point Gauss Seidel method.
Benzer Tezler
- Sıkıştırılamaz ve laminer dış akışlar için derin öğrenme temelli bir hesaplamalı akışkanlar dinamiği çözümünün geliştirilmesi
Development of a deep learning-based computational fluid dynamics solution procedure for incompressible and laminar external flows
TÜRKAY GENÇER
Yüksek Lisans
Türkçe
2024
Makine MühendisliğiEge ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DOÇ. DR. UTKU ŞENTÜRK
- Implicit lattice Boltzmann method for laminar/turbulent flows
Laminer/türbülanslı akışlar için örtük kafes Boltzmann yöntemi
FATİH ÇEVİK
Doktora
İngilizce
2016
Makine MühendisliğiOrta Doğu Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. KAHRAMAN ALBAYRAK
- Development of a navier stokes solver for compressible viscous flows and coupling it with optimization codes
Sıkıştırılabilir viskoz akışlar için bir navier stokes çözücüsünün geliştirilmesi ve optimizasyon kodlarıyla eşlenmesi
BURAK PEHLİVAN
Yüksek Lisans
İngilizce
2019
Makine MühendisliğiHacettepe ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ ÖZGÜR EKİCİ
- Parallel solution of unsteady, incompressible three-dimensional Navier-Stokes equations with a new implicit method
Zamana bağlı, sıkıştırılamaz, üç boyutlu Navier-Stokes denklemlerinin yeni bir kapalı metodlar paralel çözümü
VİLDAN ÜSTOĞLU ÜNAL
Doktora
İngilizce
2003
Astronomi ve Uzay Bilimleriİstanbul Teknik ÜniversitesiAstronomi ve Uzay Bilimleri Ana Bilim Dalı
PROF. DR. ÜLGEN GÜLÇAT
- Kanat ucu mesafesinin ve gövde üzeri olukların eksenel pompa içerisindeki akışa etkisinin hesaplamalı akışkan dinamiği analizi ile incelenmesi
Research of tip clearance effects and casing grooves on fluid flow in an axial pump with computational flud dynamics analysis
MEHMET DENİZ PAÇACI
Yüksek Lisans
Türkçe
2025
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. LEVENT ALİ KAVURMACIOĞLU