Preparation and characterization of chitosan - clay biocomposites
Kitosan- kil biyokompozitlerin hazırlanması ve karakterizasyonu
- Tez No: 213063
- Danışmanlar: PROF.DR. KADİR YURDAKOÇ
- Tez Türü: Yüksek Lisans
- Konular: Kimya, Chemistry
- Anahtar Kelimeler: Chitosan, biocomposite, montmorillonite, thermal properties
- Yıl: 2007
- Dil: İngilizce
- Üniversite: Dokuz Eylül Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Kimya Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 48
Özet
Kitosan kil biyokompozitlerin hazırlanmasında nano-doldurucu olarak montmorillonit(MMT), kitosan ve kilin çözünmesi ve dagılmasında da seyreltik asetik asit çözücü olarak kullanılmıstır. MMT yüklemesinin biyokompozit üzerindeki etkisi arastırılmıstır. Kitosan/MMT biyokompozit sistemleri farklı karakterizasyon yöntemleriyle (FTIR, DSC, TGA ve SEM) incelenmistir. Kitosan biyokompozitinin morfolojisi ve özellikleri saf kitosan ile karsılastırılarak çalısılmıstır. FTIR ve SEM sonuçları, düsük MMT içerikli kompozit yapıların dagınık ve araya girmis yapıda oldugunu ve yüksek MMT içerikli kompozit yapıların ise araya girmis ve birikmis yapıda olduklarını göstermistir. Biyokompozitlerin termal kararlılıkları DSC ve TGA/DTG ile, mekanik özellikleri ise çekme deneyleriyle belirlenmistir. Sonuç olarak kitosan matriksine kil eklenmesiyle kitosan filminin gerilme kuvveti artmıs ve filmin esnemesi azalmıstır. Anahtar Kelime: Kitosan, biyokompozit, montmorillonit, termal kararlılık
Özet (Çeviri)
Chitosan-clay biocomposites have been prepared in which montmorillonite (MMT) is used as nanofiller and diluted acetic acid is used as solvent for dissolving and dispersing chitosan and montmorillonite respectively. The effect of MMT loadings in biocomposites has been investigated. The characterization with different methods (FTIR, DSC, TGA, and SEM) on chitosan/MMT biocomposites systems was examined. Morphology and properties of chitosan biocomposites have been studied compared with those of pure chitosan. The FTIR and SEM results indicated the formation of an intercalated-and-exfoliated structure at low MMT content and an intercalated-and-flocculated structure at high MMT content. The thermal stability and the mechanical properties of the composites were also examined by DSC, TGA/DTG and tensile strength measurements, respectively. The dispersed clay improves the thermal stability of the matrix systematically with the increase of clay loading. Tensile strength of a chitosan film was enhanced and elongation-at break decreased with addition of clay into the chitosan matrix.
Benzer Tezler
- Preparation, characterization and utilizations of chitosan-sepiolite biocomposite
Kitosan- sepiyolit biyokompozit hazırlanması, karakterizasyonu ve kullanımları
EMEL GÜR
Yüksek Lisans
İngilizce
2010
KimyaDokuz Eylül ÜniversitesiFizikokimya Ana Bilim Dalı
PROF. DR. MEHMET KADİR YURDAKOÇ
- Kitosan/organokil biyonanokompozitlerinin sentez ve karakterizasyonu
Synthesis and characteization of chitosan/organoclay bionanocomposites
RESUL ŞAHİN
- Çitosan/kil kompozitlerinin sentezi, karakterizasyonu ve adsorpsiyon uygulamaları
Preparation and characterization of chitosan/clay composites and their adsorption applications
AYFER YILDIRIM
- Preparation and characterization of chitosan/polypyrrole/clay nanocomposites
Çitosan/polipirol/kil nanokompozitlerinin sentezi ve karakterizasyonu
SEVİNÇ SEZİN TARIMSAL GÜLMEN
Yüksek Lisans
İngilizce
2015
Polimer Bilim ve Teknolojisiİstanbul Teknik ÜniversitesiPolimer Bilim ve Teknolojisi Ana Bilim Dalı
PROF. DR. NİLGÜN KIZILCAN
- Kitosan/farklı tip cloisite ile nanokompozit filmlerin hazırlanması ve karakterizasyonu
Preparation and characterization of chitosan/different types cloisite nanocomposites films
FATİH RAHVALI
Yüksek Lisans
Türkçe
2016
Gıda MühendisliğiÇanakkale Onsekiz Mart ÜniversitesiGıda Mühendisliği Ana Bilim Dalı
PROF. DR. CENGİZ CANER