Ömerler yeraltı kömür ocağında tam mekanize üretimde oluşan kayıpların belirlenmesi ve azaltılması üzerine araştırmalar
Investigations on determining and decreasing the coal loss at fully-mechanized production in Omerler underground coal mine
- Tez No: 213164
- Danışmanlar: DOÇ.DR. FERHAN ŞİMŞİR
- Tez Türü: Doktora
- Konular: Maden Mühendisliği ve Madencilik, Mining Engineering and Mining
- Anahtar Kelimeler: Benzetim, Yer altı madenciliği, Underground mine, Coal loss, Fully-mechanized production, Physical model, Simulation, Underground mining
- Yıl: 2007
- Dil: Türkçe
- Üniversite: Dokuz Eylül Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Maden Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Özet yok.
Özet (Çeviri)
TKİ -GL Ömerler colliery is a fully-mechanized underground lignite mine at Tunçbilek region. The thickness of the coal seam is 8,5 meters on the average. 3 m from the base is operated by a longwall, 5,5 m is produced by caving in from the roof support frame. Caving method is an easy method in terms of operation organization. However, coal losses appear during the caving operation. Coal loss is an undesirable situation since it is a loss of national resource and it increases the risk of spontaneous combustion, also. The main idea of this PhD thesis is to find coal loss values during operation and to do research on how to decrease the loss values. In order to find the coal loss, firstly, experiments are carried out in M4 and M5 panels of the mine. These studies revealed that 24,73% of top coal and 16,64% of total reserve is left behind the face during caving operation of top coal from the roof support window. In order to examine the coal loss values in Ömerler mine, a physical model of the mine is designed. Physical models of 1/10 and 1/20 geometric scale are built and experiments are performed to figure out the coal loss in the rear of the face.Then, some modifications are made on the physical model in order to investigate how to decrease coal loss in the mine and experiments are made to find out the changes in the loss values. According to the results achieved, enlarging roof support frame and usage of rear face conveyor would decrease coal loss. Computer simulation of the mine operation is done by ARENA 2.2 simulation software. The coal loss values found in the previous experiments are employed in this simulation model. By the use of model, face production values, equipment selection, and the number of shearer loader cuts are found.
Benzer Tezler
- Kalın kömür tabakalarında yürüyen tahkimatlardaki basınçların analizi ve yük tahminleri
Analysis of pressures on powered supports in thick coal seams and load estimations
SONER ÖĞRETMEN
- Orta ve Batı Anadolu'da tam mekanize kömür madenlerinde üretim kayıplarının teknik ve ekonomik açıdan irdelenmesi
Investigation of production losses occuring at the fully mechanized coal mines in the Middle and West Anatolia from mechanical and economic point of views
F. EMRAH SAKARYA
- GLİ Müdürlüğü Ömerler Yeraltı Ocağında çalıştırılan tam mekanize kömür kazı sistemlerinden pencereli tahkimat sistemi ile arka konveyörlü tahkimat sisteminin arka kömür verimlerinin karşılaştırılması ve değerlendirilmesi
Comparison and Evaluation of GLI Ömerler full mechanized underground mine excavation system which are support window and rear double chain conveyor support systems on the effect of the top coal efficiency
AKTAN AŞMET
Yüksek Lisans
Türkçe
2019
Kütahya Dumlupınar ÜniversitesiMaden Mühendisliği Ana Bilim Dalı
Yükleniyor...
- Kütahya-Tunçbilek-Ömerler Kömür Ocağında çalışan işçilerde bazı tümör marker düzeylerinin değerlendirilmesi
Başlık çevirisi yok
FATMA GÜNDOĞAN
- Kütahya Tunçbilek-Ömerler Ocağı'nda çalışan işçilerde serum lipid parametreleri ile karaciğer fonksiyon testlerinin araştırılması
Evaluation of the levels of serum lipid parameters and liver function tests of people working in coal mine of Ömerler-Tunçbilek (Kütahya)
VEDAT ÇETİN