Geri Dön

A computer assisted universal design (CAUD) plug-in tool for architectural design process

Mimari tasarım süreci için bilgisayar destekli evrensel tasarım eklenti aracı

  1. Tez No: 220730
  2. Yazar: YASEMİN AFACAN
  3. Danışmanlar: DOÇ. DR. HALİME DEMİRKAN
  4. Tez Türü: Doktora
  5. Konular: Bilim ve Teknoloji, Mimarlık, İç Mimari ve Dekorasyon, Science and Technology, Architecture, Interior Design and Decoration
  6. Anahtar Kelimeler: Evrensel tasarım, Mutfak tasarımı, Mimari tasarım süreci, Bilgisayar destekli tasarım, Bilişsel tasarım stratejileri, Universal design, Kitchen design, Architectural design process, Computer- aided design, Cognitive design strategies
  7. Yıl: 2008
  8. Dil: İngilizce
  9. Üniversite: İhsan Doğramacı Bilkent Üniversitesi
  10. Enstitü: Güzel Sanatlar Enstitüsü
  11. Ana Bilim Dalı: İç Mimarlık ve Çevre Tasarımı Ana Sanat Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 240

Özet

Evrensel tasarım yönetimi, çok parametreli olma özelliğinden dolayı son derece karmaşık ve zor bir tasarım konusudur. Mimari tasarım sürecinde çeşitli özürleri olan insanların tasarım gereksinimlerini karşılarken daha da zorlaşmaktadır. Bu çalışma, SketchUp adlı üç boyutlu tasarım yazılımı ile uyumlu çalışabilen bir bilgisayar destekli evrensel tasarım eklenti aracının gelişimini ve uygulamasını önerisini kapsamaktadır. Bu eklenti aracının bilgi desteğinin verimli olabilmesi için, kuram ve araştırmalar çerçevesinde bilişsel tasarım stratejileri araştırılmıştır. En uygun bilişsel tasarım stratejisine göre bu aracın analiz, sentez ve değerlendirme işlemleri sırasındaki yetenekleri bu şekilde tanımlanmıştır. Ayrıca, iki önceliklendirme tekniğinin (oyun planlama ve maliyet değer yaklaşım kullanan analitik hiyerarşi süreci) hibritleşmesine dayalı bir önceliklendirme tekniği önerilmiş ve önerilen bu teknik ile doğru evrensel tasarım gerekliliklerini seçebilme zorluklarının üstesinden gelinmiştir. Önerilen hibrit tekniği ile gereklilik-tasarım ilişkileri hesaplanmış ve maliyet-değer oranları bulunmuştur. Evrensel mutfak tasarım uygulamaları için geliştirilen bu çalışma, bilgisayar destekli tasarım ortamındaki evrensel tasarım problemini çözme sürecine önemli katkılar sağlamıştır. Son olarak, kabul edilebilirlik çalışmaları sonuçları bu eklenti aracının kullanılabilir, anlaşılır, verimli, yararlı ve memnun edici olduğunu göstermiştir.

Özet (Çeviri)

Managing universal design process is a highly complex and challenging design task due to its multi-parameter characteristics. It becomes even more difficult while accommodating the needs of people with diverse impairments in architectural design process. Thus, this study aims to propose the development and implementation of an innovative computer-assisted universal design plug-in tool (CAUD) in the initial design phase that is compatible with the existing three-dimensional design software, SketchUp. Based on the theories and researches, the cognitive design strategies are analyzed for the efficiency of the knowledge support of the CAUD plug-in tool. Thus, the capabilities of the plug-in tool are defined according to the accommodation with an ideal cognitive strategy during analysis, synthesis and evaluation operations. Moreover, to achieve challenges of selecting the right set of universal design requirements within the plug-in tool, a prioritization technique that is based on the hybridization of the two techniques, the Planning Game (PG) and Analytic Hierarchy Process (AHP) using a cost-value approach is proposed. Through the proposed hybrid technique, requirement?design relationships are computed and the cost-value ratios of requirement priorities are represented. The study that is developed for universal kitchen design applications yielded a significant contribution to the universal design problem-solving process in a computer-aided design (CAD) environment. Finally, the results of the acceptability studies also showed that the CAUD plug-in tool is found in general useful, understandable, efficient, helpful and satisfactory.

Benzer Tezler

  1. Üniversal bir model kalıp atölyesinin planlanması

    Başlık çevirisi yok

    FİLİZ ŞARDAĞI

    Yüksek Lisans

    Türkçe

    Türkçe

    1989

    Tekstil ve Tekstil MühendisliğiEge Üniversitesi

    Tekstil Mühendisliği Ana Bilim Dalı

    PROF. DR. M. NAZMİ ERCAN

  2. Farklı restoratif materyaller ile üretilmiş endokronların marjinal uyumunun ve kırılma dayanımının değerlendirilmesi

    Evaluation of marginal adaptation and fracture strength of endocrowns manufactured with different restorative materials

    GAYE SAĞLAM

    Doktora

    Türkçe

    Türkçe

    2017

    Diş HekimliğiBülent Ecevit Üniversitesi

    Protetik Diş Tedavisi Ana Bilim Dalı

    DOÇ. DR. SEDA CENGİZ

    PROF. DR. ÖZGÜL KARACAER

  3. Süt dişlerinde farklı yapıştırma materyalleriyle uygulanan zirkonyum oksit kronların bağlanma dayanımının in vitro incelenmesi

    In vitro evaluation of the shear bond strength of different luting cements on zirconium oxide crowns in primary teeth

    ZEKİYE EFE

    Diş Hekimliği Uzmanlık

    Türkçe

    Türkçe

    2019

    Diş HekimliğiErciyes Üniversitesi

    Pedodonti Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ ZEYNEP ASLI ÖZKAYA

  4. Zenginleştirilmiş öğrenme etkinliklerinin 4. sınıf öğrencilerinin simetri konusundaki başarısına etkisi

    The effect of enriched learning activities on 4th grade students success in symmetry

    ÇİMEN ÖZKARTAL

    Yüksek Lisans

    Türkçe

    Türkçe

    2019

    Eğitim ve ÖğretimAğrı İbrahim Çeçen Üniversitesi

    Temel Eğitim Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ TUĞBA ÖÇAL

  5. Computer-assisted design methodology for armoring typebridge scour countermeasures

    Köprü yerel oyulmalarına karşı koruma projelerinin bilgisayardestekli tasarımı

    MEHMET SİNAN YILDIRIM

    Yüksek Lisans

    İngilizce

    İngilizce

    2013

    İnşaat MühendisliğiOrta Doğu Teknik Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    PROF. DR. ALİ MELİH YANMAZ