Potasyum persülfat yükseltgeni kullanılarak iletken poliakrilonitril/polipirol kompozit lif hazırlanması ve karekterizasyonu
The preparation and the characterization of polypyrrolle/polyacrylonitrile conductive composite fiber using potassium persulphade as oxidant
- Tez No: 233620
- Danışmanlar: DOÇ. DR. MERAL KARAKIŞLA ŞAHİN
- Tez Türü: Yüksek Lisans
- Konular: Polimer Bilim ve Teknolojisi, Polymer Science and Technology
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2008
- Dil: Türkçe
- Üniversite: Ankara Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Kimya Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 117
Özet
Bu çalışmada, poliakrilonitril lif üzerinde pirolün, potasyum persülfat kullanarak kimyasal polimerizasyonu ile iletken polipirol (PPy)/poliakrilonitril (PAN) kompozit lif hazırlandı. Hazırlanan PAN/PPy kompozit lifinin içerdiği PPy miktarı ve yüzey direnci üzerine asit türü, sıcaklık, polimerizasyon süresi, monomer, yükseltgen ve asit derişimi gibi faktörlerin etkisi araştırıldı. En düşük yüzey direncine sahip kompozit liflerin sırası ile 0,06 M, 1,2 M ve 0,03 M pirol, HCl ve K2S2O8 derişim değerlerinde elde edildi. Kimyasal polimerizasyon için en uygun sıcaklığın 0°C, polimerizasyon süresinin ise 2 saat olduğu gözlendi.PPy/PAN kompozit lifinin yoğunlukları, bağıl nem oranı ve -20°C ile + 120°C sıcaklık aralığında yüzey direncinin değişimi, germe-çekme özellikleri incelendi. Kompozitlerin karekterizasyonu ise FTIR spektroskopisi, TGA ve SEM teknikleri ile yapıldı.
Özet (Çeviri)
In this study, conductive polypyrrole (PPy)/polyacrylonitrile (PAN) composite fiber was prepared by the chemical polymerization of pyrrole using potassium pershulphade as an oxidant upon polyacrylonitrile fiber. The change of the yield and conductivity of prepared PPy/PAN composite fibers was investigated with parameters such as species of acid, temperature, polymerization time, and the concentrations of monomer, oxidant and acid. The composite fiber with the minimum surface resistance was obtained with; 0,06 M, 1,2 M and 0,03 M pyrrole, HCl and K2S2O8 concentrations, respectively. The most adequate temperature and polymerization time for chemical polymerisation were 0°C and 2 hours, respectively.The change of the surface resistance with relative humidity ratio and the temperature between -20°C and + 120°C, the density and properties of break elongation and tensile strength of PPy/PAN composite fibers contained diffrent amount of PPy were investigated. The composites were characterized with FTIR spectroscopy, TGA and SEM techniques.
Benzer Tezler
- Production and characterization of poly(acrylonitrile-co-butyl acrylate) /polypyrrole composites and nanoparticles
Poli̇(akri̇loni̇tri̇l-ko-büti̇l akri̇lat)/poli̇pi̇rol kompozi̇tleri̇n ve nanoparti̇külleri̇n üreti̇mi̇ ve karakteri̇zasyonu
CEM ÜNSAL
Doktora
İngilizce
2014
Kimyaİstanbul Teknik ÜniversitesiTekstil Mühendisliği Ana Bilim Dalı
PROF. DR. FATMA KALAOĞLU
PROF. DR. ABDÜLKADİR SEZAİ SARAÇ
- Anilinin oksidatif polimerleşmesi ile çeşitli takviye malzemeli kompozitlerin sentezi ve karakterizasyonu
Synthesis and characterization of composites which include various reinforcement particles with oxidative polymerization of aniline
MERVE DENİZ
Yüksek Lisans
Türkçe
2012
Kimya MühendisliğiHitit ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
PROF. DR. SATILMIŞ BASAN
- Chemical deintercalation and stability investigation of nanosized C/Li2MnSiO4 cathode material with different electrolytes
C/Li2MnSiO4 katot malzemesinin kimyasal deinterkalasyonu ve farklı elektrolitler ile kararlılığının incelenmesi
EKİN EŞEN
Yüksek Lisans
İngilizce
2015
Mühendislik Bilimleriİstanbul Teknik ÜniversitesiNanobilim ve Nanomühendislik Ana Bilim Dalı
PROF. DR. FİGEN KADIRGAN
- İletken poli(etilen teraftalat)/polipirol kompozit liflerinin kimyasal polimerizasyonla hazırlanması ve karakterizasyonu
The preparation of conductive poly(ethylene terephthalate)/polypyrrole composite fibers by chemical polymerization and their characterization
ZEYNEP AYDIN
- Pirol ve türevlerini içeren polimerler sentezi
Synthesis of polymers containing pyrrole or derivatives thereof
ESİN ATEŞ GÜVEL