Dynamic analysis and design optimization of a vehicle suspension system
Araç süspansiyon sistemlerinin dinamik incelenmesi ve tasarım iyileştirilmesi
- Tez No: 276988
- Danışmanlar: YRD. DOÇ. İPEK BAŞDOĞAN
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2011
- Dil: İngilizce
- Üniversite: Koç Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 96
Özet
Araçlarda yolcu konforunun sağlanmasında yoldan gelen darbeleri emip bunların şiddetini azaltan süspansiyon sistemi önemli rol oynar. Bu sebepten dolayı bu sistemler özenli bir şekilde dizayn edilmelidirler. Bu dizaynı başarılı bir şekilde yapabilmek için süspansiyon sisteminin tüm bileşenlerinin ve bunların birbirleriyle olan etkileşimlerinin dinamik davranışları anlaşılmalıdır. Bu tezde sistem bileşenlerinin dinamik, malzeme ve boyutsal özelliklerinin süspansiyon performansı üzerine olan etkileri analiz edilmiştir.NASTRAN® isimli ticari sonlu eleman analiz yazılımı aracılığıyla sonlu eleman modelimizin frekans cevap fonksiyonları elde edilip, kritik titreşim yolları açığa çıkarılmıştır. Bu kritik öğeler incelenerek sonlu eleman modeli gerçek aracı temsil edecek şekilde dikkatlice düzenlenmiştir. Sonlu eleman modeli son haline geldikten sonar, model, süspansiyon sisteminin performansı artırmak üzere optimizasyon çalışmalarında kullanılmıştır. Dizayn parametreleri ve süspansiyon sistem performansı arasındaki ilişkiyi anlamak için temeli endüstriyel deney tasarlama tekniklerine dayanan düzenli ve parametrik bir çalışma yapılmıştır. Bu çalışmalar süspansiyon performansına en çok etkisi olan bileşenleri belirlemek için yapılan bir tarama işlem ile başlatılmıştır. Her seferinde dizayn parametreleri değiştirilerek sistemin frekans cevap fonksiyonları elde edilmiş ve buna göre çeşitli performans ölçütleri ile değerlendirmeler yapılmıştır. En etkili bileşenler ortaya çıktıktan sonra en uygun konfigurasyonu bulmak uzere optimizasyon işlemi gerçekleştirilmiştir.Bahsedilen bu çalışmaya ek olarak, parametrizasyon ve optimizasyon işlemleri yay, damper ve kütle gibi dinamik özelliklerin dışında malzeme ve boyutsal özellikler kullanılarak tekrarlanmıştır. Takip edilen yöntem ve elde edilen sonuçlar gösterdi ki bu metotla araç süspansiyonlarının performansları etkili bir şekilde en uygun performanslı hale getirilebilir ve merak edilen değişikliklerin sonuçları hakkında hızlı bir şekilde fikir sahibi olunabilir.
Özet (Çeviri)
Suspension system of a vehicle plays an important role in maintaining the comfort of the passengers by isolating and absorbing road shock from the passenger compartment. For that reason, it is critical to understand the dynamics of the suspension system components and more importantly, the way they interact with each other. In this thesis, the effect of the dynamic, material and dimensional properties of the system components on the performance of the suspension system is analyzed and a general approach is developed to understand the relationship between the design parameters and the suspension vibration isolation performance.The Frequency Response Function (FRF) of the suspension system is obtained through a Finite Element Model (FEM) by using the commercial FE analysis software NASTRAN®. The FEM is used to study the effect of the design parameters of the system components such that the vibration isolation performance of the suspension system can be improved. For this purpose, a structured parametric study, based on techniques from the field of industrial design of experiments is employed to understand the relationship between the design parameters and the suspension vibration isolation performance. A screening study is performed to identify the components that have the highest contribution to the suspension system vibration isolation performance. For each run, the dynamic analysis of the suspension system is performed, the FRFs are constructed and the vibration isolation performance is quantified using several metrics that consider the amount of vibration transmitted through the suspension system. The highest contributors to the vibration isolation performance are identified and preliminary optimization runs are performed to find the optimum values for the critical design parameters. A stochastic approach is also implemented to the above study to consider the variations and uncertainties that arise from a variety of sources like manufacturing processes, external disturbances, and operating conditions.In addition to the above study, material and dimensional properties of particular components of the suspension system are selected as design parameters. A similar procedure is followed to determine an optimum configuration for a better vibration isolation performance. The results are compared using various configurations for sample studies. The results show that the presented approaches can be effectively used to improve the suspension performance by modifying the design parameters of the suspension system.
Benzer Tezler
- Bir ticari taşıtın bağımsız ön askı sisteminin çeşitli sürüş koşulları için dinamik gerilme analizi ve yorulma ömrü optimizasyonu
Dynamic stress analysis and fatigue life optimisation of a commercial vehicle independent front suspension under various driving conditions
KORAY ÇANAKKALE
Yüksek Lisans
Türkçe
2017
Makine MühendisliğiDokuz Eylül ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. MEHMET MURAT TOPAÇ
- Yol taşıtları ön süspansiyon sistemlerinin bilgisayar destekli analizi ve optimizasyonu
Computer aided analysis and optimization of road vehicle front suspension
ALİ BOYALI
Yüksek Lisans
Türkçe
2002
Makine Mühendisliğiİstanbul Teknik ÜniversitesiOtomotiv Ana Bilim Dalı
DOÇ. DR. LEVENT GÜVENÇ
- İç nokta algoritması kullanılarak muharebe tankı süspansiyonunun çok amaç fonksiyonlu pareto optimizasyonu
Suspansion system optimization of a battle tank using multiobjective interior point algorithm
EMRE ERTÜRK
Yüksek Lisans
Türkçe
2015
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. ATA MUGAN
- Optimization of ride comfort for vehicles equipped with passive and active hydro-pneumatic suspensions
Pasif ve aktif hidropnömatik süspansiyonlu araçların sürüş konforunun optimizasyonu
FERHAT SAĞLAM
Doktora
İngilizce
2016
Makine MühendisliğiOrta Doğu Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. YAVUZ SAMİM ÜNLÜSOY
- Paletli araçlarda süspansiyon sisteminin modellenmesi ve optimizasyonu
Modelling and optimization of tracked vehicle suspension
ALPER ÇOBAN
Yüksek Lisans
Türkçe
2010
Makine MühendisliğiSakarya ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DOÇ. DR. İMDAT TAYMAZ