Geri Dön

Sanayi domatesinde farklı azot seviyelerinin yaprak N değerleri ve ürün üzerine etkileri

Başlık çevirisi mevcut değil.

  1. Tez No: 27783
  2. Yazar: ZÜBEYDE GÖKKURT
  3. Danışmanlar: DOÇ. DR. NEVİN ERYÜCE
  4. Tez Türü: Yüksek Lisans
  5. Konular: Ziraat, Agriculture
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 1993
  8. Dil: Türkçe
  9. Üniversite: Ege Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Toprak Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 66

Özet

50 SUMMARY This research is conducted in the tomato fields of a farmer contractor to a company producing tomato paste in Muradiye-Manisa Aegean Region. Different nitrogen levels affecting the accumulation of nitrogen in the leaves and the effects on the product was examined. In this study one soil sample and 25 leaf samples were analysed physically and chemically and yield was obtained. Five different levels of nitrogenous fertilizer were used (0-6-12-18-24 kg N/da) with constant levels of phosphorus and potassium (12 kg P"0 /da, 12 kg K 0/da). The results are as 2 5 2 follows : By applying different nitrogen levels and analysing the yield and nutritive elements in the leaves, it was included that using 12 kg nitrogen per decar total nitrogen percent and the yield (kg/da) give maximum values while P percent, Ca percent, Zn (ppm), Cu (ppm) gives the maximum average values using no nitrogen. Using 6 kg/da nitrogen, K percent, using 24 kg/da nitrogen Na percent using 12-18 kg/da nitrogen Mg percent, using 0-18 kg/da nitrogen Fe (ppm) and using 18 kg/da nitrogen Mn percent (ppm) reaches their maximum average values. Low values were obtained in total N. %, Na %, Mn % and yield when no nitrogen was applied; in Ca %, Mg % and Zn (ppm) when 6 kg N/da applied; in K %, Fe (ppm) when 12 kg N/da applied in P % when 18-24 kg N/da was applied; and in Cu (ppm) when 24 kg N/da applied.51 Positive % total N-yield production (kg/da); % P-Zn (ppm); % Na - %Mg; % Ca - Fe (ppm); % Ca - Mn (ppm); % Ca - Cu (ppm) and negative (% K - % Ca); % K - Cu (ppm); % Na - Zn (ppm) correlations are also determined.

Özet (Çeviri)

50 SUMMARY This research is conducted in the tomato fields of a farmer contractor to a company producing tomato paste in Muradiye-Manisa Aegean Region. Different nitrogen levels affecting the accumulation of nitrogen in the leaves and the effects on the product was examined. In this study one soil sample and 25 leaf samples were analysed physically and chemically and yield was obtained. Five different levels of nitrogenous fertilizer were used (0-6-12-18-24 kg N/da) with constant levels of phosphorus and potassium (12 kg P"0 /da, 12 kg K 0/da). The results are as 2 5 2 follows : By applying different nitrogen levels and analysing the yield and nutritive elements in the leaves, it was included that using 12 kg nitrogen per decar total nitrogen percent and the yield (kg/da) give maximum values while P percent, Ca percent, Zn (ppm), Cu (ppm) gives the maximum average values using no nitrogen. Using 6 kg/da nitrogen, K percent, using 24 kg/da nitrogen Na percent using 12-18 kg/da nitrogen Mg percent, using 0-18 kg/da nitrogen Fe (ppm) and using 18 kg/da nitrogen Mn percent (ppm) reaches their maximum average values. Low values were obtained in total N. %, Na %, Mn % and yield when no nitrogen was applied; in Ca %, Mg % and Zn (ppm) when 6 kg N/da applied; in K %, Fe (ppm) when 12 kg N/da applied in P % when 18-24 kg N/da was applied; and in Cu (ppm) when 24 kg N/da applied.51 Positive % total N-yield production (kg/da); % P-Zn (ppm); % Na - %Mg; % Ca - Fe (ppm); % Ca - Mn (ppm); % Ca - Cu (ppm) and negative (% K - % Ca); % K - Cu (ppm); % Na - Zn (ppm) correlations are also determined.

Benzer Tezler

  1. Tez No

    128259

    Farklı plastik örtü kalınlığına sahip alçak tünellerin ve tohum ekim zamanlarının sanayi domatesinde fide kalitesine etkileri

    The Effects of different plastic cover thickness of low tunnels and sowing dates on processing tomato seedling

    MESUT ÇAMLILAR

    Yüksek Lisans

    Türkçe

    Türkçe

    2002

    ZiraatSüleyman Demirel Üniversitesi

    Bahçe Bitkileri Ana Bilim Dalı

    PROF.DR. HÜSEYİN PADEM

  2. Tez No

    170491

    Farklı kalsiyum kaynak ve dozları ile farklı azot kaynaklarının domatesin verimi ve çiçek burnu çürüklüğü üzerine etkisi ile ilgili bir araştırma

    A research on the effects of different calcium sources and levels and different nitrogen sources on tomatoes yield and blossom-end roots

    ALİ SUNGUR

    Yüksek Lisans

    Türkçe

    Türkçe

    2005

    ZiraatÇanakkale Onsekiz Mart Üniversitesi

    Toprak Ana Bilim Dalı

    DOÇ. DR. NURAY MÜCELLA MÜFTÜOĞLU

  3. Tez No

    114211

    Sanayi domatesinde farklı sulama yöntemleri ve su düzeylerinin su-verim ilişkileri üzerine etkilerinin incelenmesi

    The Study of effects of different irragation methods and water amounts on water-yield relationships of processing tomato

    TALİH GÜRBÜZ

    Yüksek Lisans

    Türkçe

    Türkçe

    2001

    ZiraatAdnan Menderes Üniversitesi

    Tarımsal Yapılar ve Sulama Ana Bilim Dalı

    DOÇ.DR. FUAT SEZGİN

  4. Tez No

    65750

    Sanayi domatesinde damla sulama sistemi ile uygulanan farklı N dozlarının besin maddesi alınımına ve verime etkisi

    Başlık çevirisi yok

    BURHAN İLENGİZ

    Doktora

    Türkçe

    Türkçe

    1997

    ZiraatEge Üniversitesi

    PROF. DR. DİLEK ANAÇ

  5. Tez No

    420585

    Ege bölgesi koşullarında ve farklı toprak tiplerinde üretilen sanayi domatesinde hasat öncesi son sulama tarihinin belirlenmesi

    The determination of pre-harvest final irrigation date for processing tomatoes cultivated in different soil types under aegean region conditions

    YAHYA NAS

    Yüksek Lisans

    Türkçe

    Türkçe

    2016

    ZiraatEge Üniversitesi

    Bahçe Bitkileri Ana Bilim Dalı

    PROF. DR. İBRAHİM DUMAN

Geri Dön