Geri Dön

İnce seramik teknolojisinin dünü, bugünü, yarını

Başlık çevirisi mevcut değil.

  1. Tez No: 29380
  2. Yazar: ORHAN ÖZTÜRK
  3. Danışmanlar: PROF. DR. LALE ZOR
  4. Tez Türü: Yüksek Lisans
  5. Konular: Kimya, Chemistry
  6. Anahtar Kelimeler: Seramikler, Ceramics
  7. Yıl: 1993
  8. Dil: Türkçe
  9. Üniversite: Anadolu Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Kimya Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: Belirtilmemiş.

Özet

VI SUMMARY The art and knowhow of ceramic -ma king had been known by man since about 7000 years. However, almost no remarkab le progress was achieved in this field, until after the industrial revolution. Since then, ceramic technology has shown an enormous development and as- a result of this fact, ceramics became preferred material in many different areas such as medicine, electronics, and textile industry etc. Today ceramic- making is more than just a muddy clay- paste cooking. Nowadays, the process of ceramic -ma king is mainly directed according to the special needs- of the consuming area. Especially technological fine ceramics must be designed to have certain thermal, electrical, mechanical properties. Thus making than suitable materials for special areas. Naturally this would mean that, the process of making fine ceramics with special properties, is a combina tion of a series of carefully controlled different steps. That is, the main ingredients, the relative rations of the se ingredients, the necessary special additives, drying, glazing, furnacing operations, must all be very carefully designed and controlled. This work aims to summarize the history, the prog ress, the present day technology and the future prospects of the fine ceramics. In order to achieve this, after a brief introduction abut the history the classification of ceramics (Chap. 1), main ingredients, additives and their properties are covered in the preceeding chapters <Chap. 2- 4). The thermal operations and glazing are handled in Chap-Vii ters 5 and 6 respectively. Technological ceramics and their uses are covered in Chapter 7. The potential uses of tech nological ceramics however, can not be limited with the few pages covered in this thesis. No doubt, specially designed new technological ceramics,wil 1 replace a number of metals, polymeric substances and steel in very near future.

Özet (Çeviri)

VI SUMMARY The art and knowhow of ceramic -ma king had been known by man since about 7000 years. However, almost no remarkab le progress was achieved in this field, until after the industrial revolution. Since then, ceramic technology has shown an enormous development and as- a result of this fact, ceramics became preferred material in many different areas such as medicine, electronics, and textile industry etc. Today ceramic- making is more than just a muddy clay- paste cooking. Nowadays, the process of ceramic -ma king is mainly directed according to the special needs- of the consuming area. Especially technological fine ceramics must be designed to have certain thermal, electrical, mechanical properties. Thus making than suitable materials for special areas. Naturally this would mean that, the process of making fine ceramics with special properties, is a combina tion of a series of carefully controlled different steps. That is, the main ingredients, the relative rations of the se ingredients, the necessary special additives, drying, glazing, furnacing operations, must all be very carefully designed and controlled. This work aims to summarize the history, the prog ress, the present day technology and the future prospects of the fine ceramics. In order to achieve this, after a brief introduction abut the history the classification of ceramics (Chap. 1), main ingredients, additives and their properties are covered in the preceeding chapters <Chap. 2- 4). The thermal operations and glazing are handled in Chap-Vii ters 5 and 6 respectively. Technological ceramics and their uses are covered in Chapter 7. The potential uses of tech nological ceramics however, can not be limited with the few pages covered in this thesis. No doubt, specially designed new technological ceramics,wil 1 replace a number of metals, polymeric substances and steel in very near future.

Benzer Tezler

  1. Tez No

    68920

    Synthesis of the BN-AIN composites by carbothermal reduction and nitridition of B4C-Al2O3 mixtures

    AIN-BN kompozitlerinin reaksiyon sinterlenmesi yöntemiyle üretimi

    CEM ÇELİKER

    Yüksek Lisans

    İngilizce

    İngilizce

    1997

    Metalurji Mühendisliğiİstanbul Teknik Üniversitesi

    Malzeme Bilimi ve Mühendisliği Ana Bilim Dalı (disiplinlerarası)

    PROF. DR. ADNAN TEKİN

  2. Tez No

    151862

    Kubad Abad'a (Konya) ait Selçuklu seramik ve çinilerinin termolüminesans (TL) tarihlendirilmesi, yapısının belirlenmesi ve teknolojisinin açıklanması

    Thermoluminescence (TL) dating, reconstructing and interpreting the technologies of Seljuk's ceramics and tiles from Kubad Abad (Konya)

    MUSTAFA TOPAKSU

    Doktora

    Türkçe

    Türkçe

    2004

    Fizik ve Fizik MühendisliğiÇukurova Üniversitesi

    Fizik Ana Bilim Dalı

    PROF.DR. ZEHRA YEĞİNGİL

  3. Tez No

    965529

    Investigation of fine and hyperfine structure energy levels of Holmium I using laser spectroscopic techniques

    Holmiyum I'in ince ve aşırı ince yapı enerji seviyelerinin laser spektroskopik yöntemlerle incelenmesi

    SEDA KIN BARKA

    Doktora

    İngilizce

    İngilizce

    2025

    Fizik ve Fizik Mühendisliğiİstanbul Teknik Üniversitesi

    Fizik Mühendisliği Ana Bilim Dalı

    PROF. DR. GÜNAY BAŞAR

  4. Tez No

    458885

    Characterization investigations of W-xTi alloys and W-xTi/2 WT% LaB6 composites fabricated by mechanical alloying and sintered using pressureless sintering or spark plasma sintering techniques

    Mekanik alaşımlama ve basınçsız sinterleme ile spark plazma sinterleme yöntemleriyle üretilen W-xTi alaşımların ve W-xTi/2 WT% LaB6 kompozitlerinkarakterizasyon çalışmaları

    HADI JAHANGIRI

    Doktora

    İngilizce

    İngilizce

    2016

    Metalurji Mühendisliğiİstanbul Teknik Üniversitesi

    Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı

    PROF. MUSTAFA LUTFİ ÖVEÇOĞLU

  5. Tez No

    1012262

    3 boyutlu yazıcılar ile üretilmiş sürdürülebilir geopolimerlerin mekanik, durabilite ve çevresel etkilerinin incelenmesi

    Investigation of the mechanical, durability, and environmental performance of sustainable geopolymers produced by 3d printing

    ÖMER FARUK KURANLI

    Doktora

    Türkçe

    Türkçe

    2026

    İnşaat MühendisliğiYıldız Teknik Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    PROF. DR. MÜCTEBA UYSAL

    PROF. DR. LİBERATO FERRARA

Geri Dön