Vital molar dişlere uygulanan seramik ve kompozit inleylerde kavite duvar kalınlıklarının ve açılandırılmalarının stres dağılımına etkilerinin incelenmesi
Examination on the effects of the cavity wall thickness and angle formation in the ceramic and composite inlays applied to the vital molar teeth on the stress distribution
- Tez No: 294350
- Danışmanlar: PROF. DR. CELİL DİNÇER
- Tez Türü: Doktora
- Konular: Diş Hekimliği, Dentistry
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2012
- Dil: Türkçe
- Üniversite: Gazi Üniversitesi
- Enstitü: Sağlık Bilimleri Enstitüsü
- Ana Bilim Dalı: Protetik Diş Tedavisi Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 128
Özet
Son yıllarda, adeziv ve restoratif materyallerdeki gelişmelere bağlıolarak posterior dişlerde meydana gelen doku kaybını estetik inley ile restoreetmeye ilgi artmıştır.Bu çalışmada vital mandibular 1. molar dişlere uygulanan seramik vekompozit inleylerde kavite duvar kalınlıklarının ve açılandırılmalarının stresdağılımına etkileri sonlu elemanlar stres analiz yöntemi ile incelemiştir.Mandibular 1. molar diş ve çevre dokuları modellendikten sonra üç farklıkavite taban genişliğine ve dört farklı toplam kavite duvar açısına sahip MODkaviteler oluşturulmuştur. Modeller seramik ve iki farklı elastisite modülünesahip kompozit inley ile restore edilmiş ve vertikal eksende 5 mm çapında küreile temas noktaları restorasyon içerisinde kalacak şekilde 200N kuvvetuygulanmıştır. Diş yapılarında meydana gelen eşdeğer stres bulgularıincelenmiştir.Analizler incelendiğinde seramik inley ile restore edilen molar dişlerdekalan duvar kalınlığı azaldıkça, stres miktarının değişmediği, kompozit inleylerile restore edilen dişlerde ise stres miktarının arttığı görülmüştür. Ayrıca seramikinley ile restore edilen molar dişlerde toplam kavite duvar açısı arttıkça oluşanstres miktarı değişmezken, kompozit inleyler ile restore edilen dişlerde toplamkavite duvar açısı arttıkça meydana gelen streslerde artış gözlemlenmiştir.Çalışmada vital molar dişlerin restorasyonunda kullanılan inley materyalinebağlı olarak elastisite modülü değeri arttıkça, kalan diş yapılarına iletilen stresmiktarının azaldığı sonucuna varılmıştır.
Özet (Çeviri)
Over the past few years, there has been a growing interest in restoringthe tissue loss occurring in the posterior teeth, due to the developments in theadhesive and restorative materials, with inlays.In this study, the effects of the cavity wall thickness and the angleformation in the ceramic and composite inlays applied to the vital mandibularfirst molars on the stress distribution were examined through the finite elementmethod.After the mandibular first molar and the surrounding tissues had beenmodelled, MOD cavities having three different cavity base widths and fourdifferent total occlusal convergence angles were formed. Models were restoredwith a ceramic and composite inlay having two different elasticity modules and aforce of 200N was used on a vertical axis provided that the contact points in 5mm diameter would stay within the limits of restoration. Equivalent stressfindings occurring in the dental structures were examined.When the analyses were studied, it was observed that the amount ofstress does not change as the wall thickness decreases in the molars restoredwith ceramic inlays while the amount of stress increases in the case of themolars restored with composite inlays. Furthermore, although the amount ofstress remains the same in the molar teeth restored with ceramic inlays as thetotal occlusal convergence angle increases, the amount of stress occurring wasobserved to increase as the total occlusal convergence angle increases in themolar teeth restored with composite inlays. In this study, it was concluded thatthe amount of stress transmitted to the remaining dental structures decreasesas the value of the elasticity module increases depending on the inlay materialused in the restoration of the vital molar teeth.
Benzer Tezler
- Aşırı kron harabiyetine sahip mandibular molar dişlerde farklı CAD/CAM materyalleri kullanılarak yapılan post-kor destekli tam kron ve endokron restorasyonlarında oluşan stres dağılımlarının sonlu eleman analizi ile karşılaştırılması
Comparison of stress distributions in post-core supported full crown and endocrone restorations using different CAD/CAM materials in mandibular molars with excessive crown destruction, with finite element analysis
TUTKU MERTBAY
Diş Hekimliği Uzmanlık
Türkçe
2023
Diş HekimliğiAnkara ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
PROF. DR. YASEMİN KESKİN
- CAD/CAM blokların rezin simanlar ile simantasyonunda kavite dezenfektanı kullanılmasının makaslama bağlanma dayanımına etkisinin incelenmesi
Investigation of the effect of using cavity disinfectant in cementation of CAD/CAM blocks with resin cements on shears bond strength
TUĞBA ÖZ
Diş Hekimliği Uzmanlık
Türkçe
2022
Diş HekimliğiSağlık Bilimleri ÜniversitesiRestoratif Diş Tedavisi Ana Bilim Dalı
PROF. DR. FULYA TOKSOY TOPÇU
- Aşinmiş posterior dişlerde uygulanan farkli kavite şekilleri ve CAD/CAM seramik bloklarin kirilma direncine etkisinin araştirilmasi
Researching the effects on fracture resistance of different cavity forms and CAD/CAM ceramic blocks applied on eroded posterior teeth
BAHAR GÜRPINAR
Doktora
Türkçe
2015
Diş Hekimliğiİstanbul ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
PROF. DR. GÜLÜMSER EVLİOĞLU
- Molar dişlerde farklı intrakoronal derinlikte ve farklı restorasyon materyalleri ile hazırlanan endokronların sonlu elemanlar stres analizi ile incelenmesi
Investigation of endocrowns prepared with different intracoronal depth and different restoration materials in molar teeth using finite element stress analysis
BUKET DİNÇER
Diş Hekimliği Uzmanlık
Türkçe
2022
Diş HekimliğiKırıkkale ÜniversitesiEndodonti Ana Bilim Dalı
PROF. DR. ALİ ERDEMİR
- İmmediat dentin kaplama ve deneme pastası kontaminasyonunun tam seramiklerin bağlanma dayanımına etkisi
Influence of TRY-in paste contamination on immediate and delayed dentin sealing
GÖZDE KÖSEOĞLU ÇİFTÇİ
Doktora
Türkçe
2015
Diş HekimliğiÇukurova ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
YRD. DOÇ. DR. ORHUN EKREN