Geri Dön

Splİt klimaların iç ünitelerinde kullanılan fanların oluşturduğu akış alanının incelenmesi

Investigation of flow fields created by the fan of the indoor unit of split type air conditioner

  1. Tez No: 297013
  2. Yazar: ONUR ÖZDEMİR
  3. Danışmanlar: PROF. DR. HASAN A. HEPERKAN
  4. Tez Türü: Yüksek Lisans
  5. Konular: Makine Mühendisliği, Mechanical Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2011
  8. Dil: Türkçe
  9. Üniversite: Yıldız Teknik Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Isı Proses Bilim Dalı
  13. Sayfa Sayısı: 78

Özet

Bireysel Split tip klimalarda iç ünite kullanıcının bulunduğu mahale yerleştirilmektedir. Ses seviyesi ürünün seçimi için önemli bir etkendir. İç ünite içerisinde daha düzgün bir akış elde etmek türbülansı azaltarak ses seviyesinin de azalmasına sebep olacaktır. Aynı zamanda daha yüksek hava debisi elde edecek şekilde fan, arka duvar ve dil geometrisi tasarlamak fanın daha düşük devirlerde çalışmasına olanak sağlayacaktır. Böylece hem enerji tasarrufu sağlanmış olacak hem de ses seviyesinin azaltılması sağlanacaktır. Bu çalışmada ses seviyesini ve hava debisini etkileyen geometrik değişkenler incelenmiştir.Literatürler ve patentler incelendiğinde çapraz akışlı fanların performansını etkileyen parametreler belirlenmiştir. Ses seviyesinin azaltılması konusunda özellikle arka duvar yönlendirme kanadının yapısı ile ilgili çalışmalar incelenmiştir. Hava debisinin arttırılması için de arka duvar fan arası mesafeler araştırılmıştır.Hava debisinin ölçümü için ANSI/AMCA 210-07 ?Laboratory Methods of Testing Fans for Certified Aerodynamic Performance Rating? standartına göre bir fan test tüneli kurulmuştur.Yapılan literatür ve patent araştırmalarından elde edilen çıkarımlar sonucunda elde edilen arka duvar yapısına ait geometriler split klima iç ünitesinde kullanılacak şekilde modellenmiştir. Fluent programında sayısal olarak analiz edilmiştir. Elde edilen veriler ile yaptırılan prototiplerin testleri sonucunda alınan datalar karşılaştırılmıştır. Analiz ve deney sonuçları arasında hata ortalama %5 olarak belirlenmiştir.

Özet (Çeviri)

Indoor unit of the split type air conditioner is placed where the user is located. The level of noise is an important factor for the choice of the air conditioner. Obtaining a better flow in the indoor unit reduces the noise level by decreasing turbulence. At the same time, designing the geometries of the fan, the rear wall, and the stabilizer to obtain more air flow operates the fan at lower rpm. Consequently, the energy will be saved and the noise level will be reduced. In this study, the geometric variables which affect the noise level and the air flow rate is examined.The parameters affecting the performance of the cross flow fans are determined by studying the literature and the patents. Regarding the reduction of the noise level issue, the previous studies on the structure of the guide vane of the rear wall are especially investigated. The distances between the fan and the rear wall are studied to increase the air flow rate.To measure the air flow rate a fan test tunnel was built according to ANSI/AMCA 210-07 ?Laboratory Methods of Testing Fans for Certified Aerodynamic Performance Rating? standard.The geometries of the structure of the rear wall, obtained from the inferences acquired by the studies of the literature and the patents, are modeled to be used in the indoor unit of the split type air conditioner. Geometries are also analyzed by using Fluent software. The data taken from the tests done on the constructed prototypes and the data from the analyses are compared. The error between the results of the analyses and the experiments are determined.

Benzer Tezler

  1. VRV klima sistemlerinin tanımlanması ve diğer sistemlerle karşılaştırılması

    The Definition of VRV air condition systems, and the comparison between the other systems

    ZOZAN SİYAHHAN

    Yüksek Lisans

    Türkçe

    Türkçe

    1999

    Makine MühendisliğiYıldız Teknik Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    PROF. DR. DOĞAN ÖZGÜR

  2. System component balancing in split type-air-conditioners

    Başlık çevirisi yok

    ÖZGÜR GÖK

    Yüksek Lisans

    İngilizce

    İngilizce

    1997

    Makine Mühendisliğiİstanbul Teknik Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    PROF. DR. A. TALHA DİNİBÜTÜN

  3. Numerical study of heat transfer performance on the air side of evaporator for split air conditioning systems

    Split iklimlendirme sistemlerindeki ısı değiştirgecinin hava tarafındaki ısı transferi performansının sayısal incelemesi

    FUNDA KURU

    Yüksek Lisans

    İngilizce

    İngilizce

    2010

    Makine MühendisliğiDokuz Eylül Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    DOÇ. DR. DİLEK KUMLUTAŞ

  4. Determination of heat transfer and flow characteristics of split air conditioners by infrared thermography and particle image velocimetry

    Split klimaların ısı transferi ve akış karakteristiklerinin kızılötesi termografi ve parçacık görüntülemeli hız ölçümü ile belirlenmesi

    ZİYA HAKTAN KARADENİZ

    Doktora

    İngilizce

    İngilizce

    2011

    Makine MühendisliğiDokuz Eylül Üniversitesi

    Makine Mühendisliği Bölümü

    DOÇ. DR. DİLEK KUMLUTAŞ

  5. Klima iç ünite eşanjörü üzerinde oluşan yoğuşma suyunun dış ünite eşanjörüne aktarılmasının performansa olan etkisinin deneysel olarak incelenmesi

    Experimental investigation of the effect of the transmission of the condensate water formed on the internal heat exchanger to the outdoor unit exchanger on performance

    ABDULKADİR ŞENER

    Yüksek Lisans

    Türkçe

    Türkçe

    2020

    EnerjiGazi Üniversitesi

    Makine Eğitimi Ana Bilim Dalı

    DOÇ. DR. HALİL İBRAHİM VARİYENLİ