Influence of different thickness on the flexural strength of zirconia ceramics
Influence of different thickness on the flexural strength of zirconia ceramics
- Tez No: 298710
- Danışmanlar: PROF. DR. ENDER KAZAZOĞLU
- Tez Türü: Yüksek Lisans
- Konular: Diş Hekimliği, Dentistry
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2011
- Dil: İngilizce
- Üniversite: Yeditepe Üniversitesi
- Enstitü: Sağlık Bilimleri Enstitüsü
- Ana Bilim Dalı: Protetik Diş Tedavisi Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 86
Özet
Özet yok.
Özet (Çeviri)
The aim of this project was to evaluate and compare the different thickness of zirkonzahn ceramics and its mechanical properties of ceramics, which have generated interest in restorative dentistry because of their high strength and high resistance to fracture.Three different thickness and 10 samples of zirkonzahn ceramic were selected for this study (15x0.3mm), (15x0.5mm), (15 x0.7mm) Three control discs of the green stage Zirconia block were cut with saw (leitz 1600) and sintered in zirkonzahn sintering oven start at 20- 1500 ?C. All discs were polished with diamond paste. The cycle of all processes take 8 hrs and this procedure were provided by (zirkonzahn Furnace). The surface of the Zirconia specimens were ground with 600, 800, 1200 (Silver carbide abrasives) under water cooling and then with 120 ?m Al2O3 particles are blasted to 0.5 MPa pressure from a distance of 10 mm, 15 seconds.The evaluation data were performed by NCSS (Number Crunchers statistical system) 2007&PASS 2008 Statistical Software (Utah, USA) program. The evaluation of operating data, comparisons between groups one-way analysis of variance (one way ANOVA) test and Tukey HDS test was used for the determination of the group that lead to differences. Pearson correlation analysis was used for assessing the relationships between parameters p .05).In this study the Increasing the core thickness from 0.3 to 0.5 has shown 7% increase at the flexural strength and the Increasing the core thickness from 0.5 to 0.7 mm has shown no differences at the flexural strength. Result of this in-vitro study shows that increasing the thickness of zirconia from 0.3 mm to 0.5 or 0.7 mm it does not appear to be significant effect on flexural strength.
Benzer Tezler
- Kısa alın levhalı kiriş-kolon birleşimlerinin çevrimsel tekrarlı yükler altında davranışlarının incelenmesi ve deprem etkileri altında yapısal davranışa katkılarının araştırılması
The study of the behavior of header end-plate beam-to-column connections under cyclic loads and the investigation of their contributions to structural behavior under seismic effects
ADEM KARASU
Doktora
Türkçe
2021
İnşaat Mühendisliğiİstanbul Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DOÇ. DR. CÜNEYT VATANSEVER
- Dayanım ve dayanıklılık açısından yüksek performanslı çimento esaslı tabakalı kompozitlerin geliştirilmesi
Development of high performance cementitious laminated composites in terms of high strength and high durabilty
ESMA GİZEM DAŞKIRAN
Doktora
Türkçe
2018
İnşaat Mühendisliğiİstanbul Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DOÇ. DR. MUSTAFA GENÇOĞLU
- Investigation into prying force and bolt moment in bolted steel T-stubs
Cıvatalı çelik birleşimlerdeki kanırtma etkisinin araştırılması
TCHABREMANE JEAN DE LA CROIX KOMBATE
Doktora
İngilizce
2024
İnşaat MühendisliğiEskişehir Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DOÇ. DR. KIVANÇ TAŞKIN
DR. KEREM PEKER
- Silisyum kaplamasının farklı titanyum seramiklerinde titanyum seramik bağına etkisi
Effect of silicon coating on titanium-ceramic bonding of different titanium ceramics
IŞIL ÖZCAN
Doktora
Türkçe
2003
Diş HekimliğiÇukurova ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
DOÇ. DR. HAKAN UYSAL