Karbon fiber destekli polimer kompozit pasarella tasarım ve üretimi
Design and manufacturing of carbon fiber reinforced polymer composite gangway
- Tez No: 301923
- Danışmanlar: PROF. DR. HASAN YILDIZ
- Tez Türü: Yüksek Lisans
- Konular: Denizcilik, Makine Mühendisliği, Marine, Mechanical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2011
- Dil: Türkçe
- Üniversite: Ege Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 95
Özet
Denizcilikte kullanılan Pasarella, tekne ve kara arasında geçiş sağlayan geçici bir köprüdür. Bir pasarellanın ağırlığı, özellikle kullanım kolaylığı açısından değerlendirilmesi gereken önemli bir kriterdir. Geleneksel malzemelerden üretilmiş yüksek bir taşıma kapasitesine sahip pasarellanın ağırlık gibi bir dezavantajı varken, hafif bir pasarellanın taşıma kapasitesi düşüktür. Karbon fiber destekli polimer kompozit pasarella bu iki probleme de çözüm getirir. Hafiftir ve daha fazla taşıma kapasitesine sahiptir.Bu bağlamda, hedeflenen yüke dayanabilen ve ağırlığı minimize edilmiş bir pasarella başarılı bir üretimin temel koşuludur. Bu çalışmada, karbon fiber destekli polimer kompozit pasarellanın bu temel koşul çerçevesinde tasarımı ve üretimi hedeflenmiştir. Pasarella geometrisi ve yapısı, bilgisayar destekli tasarım ve mühendislik yazılımları kullanılarak tasarlanmıştır. Belirlenen bu tasarımın prototip üretimi yapılıp, ardından deplasman testi uygulanmıştır. Ayrıca değişik dizilimler, sonlu elemanlar programı kullanılarak analiz edilmiştir. Oluşan gerilmeler ve deplasmanlar prototip test sonuçlarıyla kıyaslanarak analizin doğruluğu araştırılmıştır.
Özet (Çeviri)
Gangway, used in shipping, is a temporary bridge that allows passing between the boat and land. The weight of a gangway is an important criterion that should be considered, especially in terms of ease of use. A gangway made of traditional materials has several disadvantages. While the ones with a good carrying capacity have a disadvantage of weight, on the other hand the carrying capacity of a light gangway is weak. The carbon fiber reinforced polymer composite gangway brings solution to both of these problems. It is light and has the capacity to carry more.In this context, a gangway, which can withstand to the intended load with minimum weight, is the basic condition for a successful production. In this study, the design and production of the carbon fiber reinforced polymer composite gangway are targeted within the framework of this basic condition. Gangway?s shape and structure were designed using computer aided design and engineering software. After the producing of this design, the displacement test was performed. In addition different sequences were analyzed using the finite element program. By comparing analysis with the test results, the accuracy of the finite element analysis was examined.
Benzer Tezler
- Material properties of thermoplastic matrix carbon fiber reinforced high performance composites using automated fiber placement
Termoplastik bazlı karbon fiber ile güçlendirilmiş ve otomatik fiber yerleştirme ile serilmiş kompozit malzemelerin malzeme özelliklerinin incelenmesi
HATİCE AKÇAKAYA
Yüksek Lisans
İngilizce
2022
Mühendislik Bilimleriİstanbul Teknik ÜniversitesiPolimer Bilim ve Teknolojisi Ana Bilim Dalı
DOÇ. MOHAMMADREZA NOFAR
- Karbon fiber takviyeli ABS kompozitlerin FDM 3B yazıcı ile üretimi ve ANSYS ile modellenmesi
Production of carbon fiber reinforced ABS composites with FDM 3D printer and modeling with ANSYS
ZEKİ YAHYA PATAN
Yüksek Lisans
Türkçe
2019
Makine MühendisliğiÇanakkale Onsekiz Mart ÜniversitesiBiyomühendislik ve Malzeme Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ VOLKAN ESKİZEYBEK
- Karbon kompozit borularda nanokil nanotüp takviyesinin düşük hızlı darbe etkisinin incelenmesi
Investigation of low velocity impact effect of nanoclay nanotube reinforcement in carbon composite pipes
BÜLENT KARAOĞLU
Doktora
Türkçe
2022
Makine MühendisliğiNecmettin Erbakan ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. HÜSEYİN ARIKAN
- Investigation of mechanical properties of nanoparticle coated glass fiber/epoxy composites coated with dip coating and industrial production methods
Daldırma ve endüstriyel üretim yöntemleri ile üretilmiş nanoparçacık kaplı cam elyaf/epoksi kompozitlerin mekanik özelliklerinin incelenmesi
EMİR ÇETİNALP
Yüksek Lisans
İngilizce
2024
Mühendislik Bilimleriİstanbul Teknik ÜniversitesiNanobilim ve Nanomühendislik Ana Bilim Dalı
DOÇ. DR. BİRGÜL BENLİ
- A numerical and experimental study on active cooling system and polymer composite lamination of photovoltaic-cells
Fotovoltaik hücrelerin aktif soğutma sistemi ve polimer kompozit laminasyonu üzerine sayısal ve deneysel bir çalışma
TALHA BATUHAN KORKUT
Yüksek Lisans
İngilizce
2023
Mühendislik BilimleriDokuz Eylül ÜniversitesiMekatronik Mühendisliği Ana Bilim Dalı
DOÇ. DR. AYTAÇ GÖREN