Dolgu maddesi oranının kendiliğinden yerleşen beton özelliklerine etkisi
Effect of filler ratio on properties of self compacting concrete
- Tez No: 312789
- Danışmanlar: PROF. DR. H. YILMAZ ARUNTAŞ
- Tez Türü: Yüksek Lisans
- Konular: İnşaat Mühendisliği, Civil Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2011
- Dil: Türkçe
- Üniversite: Gazi Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Yapı Eğitimi Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 82
Özet
Bu çalışmada, kendiliğinden yerleşen beton (KYB) özelliklerine dolgu maddesi oranının etkisi araştırılmıştır. Bu amaçla KYB üretiminde toz malzeme olarak taş tozu ve kimyasal katkı olarak hiperakışkanlaştırıcı (HA) kullanılmıştır. KYB karışımlarında %0,60, %0,75 ve %1,00 HA katkı oranları kullanılarak toplam 8 adet KYB üretilmiştir. Üretilen bütün KYB'lerde bağlayıcı madde miktarı ve s/ç oranı sabit tutulmuştur. Üretilen taze KYB'ler üzerinde birim hacim ağırlık, T50 süresi, yayılma, V hunisi ve L kutusu taze beton deneyleri yapılmıştır. Taze beton deneylerinin ardından 10x10x10 cm boyutlarında küp numuneler elde edilmiştir. Küp numuneler laboratuardaki kür odasında bulunan kür havuzunda 3, 7 ve 28 gün süreyle bekletilmiştir. Küp numuneler üzerinde belirtilen yaşlarda birim hacim ağırlık ve basınç dayanımı deneyleri yapılmıştır. Üretilen KYB'ler deney sonuçları bakımından hem kontrol betonu hem de birbirleri ile karşılaştırılmıştır. Üretilen betonların KYB özelliği taşıyıp taşımadığı elde edilen deney sonuçları ile EFNARC kriterleri karşılaştırılarak belirlenmiştir. Doğal agrega ile üretilen KYB'ler yapay agrega kullanılarak üretilenler ile karşılaştırıldığında KYB özelliğini daha çok gösterdiği gözlenmiştir. Diğer taraftan yapay agrega ile üretilen KYB'lerin doğal agrega ile üretilenlerine kıyasla genel olarak basınç dayanımının daha yüksek olduğu belirlenmiştir.
Özet (Çeviri)
In this study, the effect of filler ratio on the properties of self-compacting concrete (SCC) was investigated. For this purpose, stone dust as powder material and hyper plasticizer (HP) as chemical admixture were used in the production of SCC. 8 mixes of SCC were produced in total by using the contents of 0,60%, 0,75% and 1,00% HP in the SCC mixtures. The amount of binding agent and the water/cement ratio were kept fixed in all the produced SCCs. Unit weight, T50 time, flow, V funnel and L box tests were performed as for fresh properties on the produced SCCs. Following the fresh concrete tests, cubic specimens at dimensions of 10x10x10 cm were obtained. The cubic specimens were cured during a period of 3, 7 and 28 days in the curing pool at the curing room of the laboratory. Unit weight and compressive strength tests were carried out at the mentioned ages on the cubic specimens. The produced SCCs were compared with both the control concrete and each other in terms of test results. Comparing the obtained test results with the EFNARC criteria it was determined whether the produced concretes feature the SCC properties or not. It was observed that SCCs produced with natural aggregate are showing much more the SCC feature when compared with those produced by using artificial aggregate. On the other hand, it was determined that the compressive strength of the SCCs produced with the artificial aggregate is generally higher when compared with those produced with natural aggregate.
Benzer Tezler
- Sentetik C-S-H bileşiklerinin kendiliğinden yerleşen betonların taze ve sertleşmiş özelliklerine etkisi
Effect of synthetic C-S-H compounds on fresh and hardened properties of self compacting concrete
MUSTAFA OĞUZ SAF
Yüksek Lisans
Türkçe
2015
İnşaat Mühendisliğiİstanbul Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. ÜNAL ANIL DOĞAN
- Atık mermer tozu kullanılarak üretilen kendiliğinden yerleşen betonların (KYB) bazı özelliklerinin araştırılması
Investigation of some properties of self-compacting concrete (SCC) produced using waste marble dust
MUSAAB MOHAMED ENBAYA
Yüksek Lisans
Türkçe
2019
İnşaat MühendisliğiKastamonu ÜniversitesiMalzeme Bilimi ve Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ SELÇUK MEMİŞ
- Kontrplaklarda dolgu maddesi oranının eğilme mukavemeti ve formaldehit ayrışmasına etkisi
The Effect of the rate of adulterant to the bending strength and to the decomposition of formaldehyde in plywoods
MURAT ÖZALP
Yüksek Lisans
Türkçe
1996
Ağaç İşleriDumlupınar ÜniversitesiMobilya ve Dekorasyon Eğitimi Ana Bilim Dalı
Y.DOÇ.DR. MUSTAFA ALTINOK
- Karbon siyahı/yağ ve karbon siyahı/dolgu maddesi oranının farklı vulkanizasyon sistemlerinde epdm, nbr ve sbr elastomerlerinin fiziko-mekaniksel özellikleri üzerine etkisi
The effect of carbon black/oil and carbon black/filler ratio on the physico-mechanical properties of epdm, nbr ansd sbr elastomers at different vulcanization systems
SEHER ERKEK
- Vişne çekirdeği katkılı biyokompozit filmler ve özelliklerinin incelenmesi
Sour cherry kernel reinforced biocomposite films and investigation of some properties
MUHAMMED MELİH BUL
Yüksek Lisans
Türkçe
2023
BiyoteknolojiSelçuk ÜniversitesiBiyoteknoloji Ana Bilim Dalı
DR. ÖĞR. ÜYESİ ÜLKÜ SOYDAL
DOÇ. DR. MURAT YILDIRIM