Karbon dolgulu siklo-olefin kopolimer (COC) kompozitlerin elektriksel ve mekanik özelliklerinin incelenmesi
Investigation of electrical and mechanical properties of cyclo-olefin copolymer (COC) composites reinforced with carbon based fillers
- Tez No: 332326
- Danışmanlar: YRD. DOÇ. DR. ALİ DURMUŞ
- Tez Türü: Yüksek Lisans
- Konular: Kimya Mühendisliği, Chemical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2013
- Dil: Türkçe
- Üniversite: İstanbul Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Kimya Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Kimyasal Teknolojiler Bilim Dalı
- Sayfa Sayısı: 111
Özet
Karbon Dolgulu Siklo-olefin Kopolimer (COC) Kompozitlerin Elektriksel ve Mekanik Özelliklerinin İncelenmesi Bu tez çalışmasında, farklı tipte karbon dolgular içeren siklo-olefin kopolimer (COC) esaslı kompozitler eriyik harmanlama yöntemiyle hazırlanmış ve elde edilen kompozitlerin mekanik özellikleri ve elektriksel iletkenlikleri incelenmiştir. Örneklerde, karbon siyahı, karbon elyaf, grafit ve genleştirilmiş grafit gibi farklı geometri ve fiziksel özelliklere sahip karbon dolgular kullanılmıştır. Farklı dolgu oranlarına sahip örnek serileri laboratuvar ölçekli çift vidalı ekstruderde hazırlanmış ve kompozitlerin elektriksel iletkenliklerindeki değişimler hem alternatif akım prensibiyle çalışan empedans spektroskopi cihazında, hemde doğru akım prensibiyle çalışan multimetrede ölçülmüştür. Örneklerin mekanik ve katı-hal viskoelastik özellikleri ise dinamik mekanik analiz (DMA) cihazında gerçekleştirilen testlerle incelenmiştir. Kompozitlerin iletkenlik testleriyle, dolgu tipi, geometrisi ve dolgu oranına bağlı olarak kompozit malzemelerin elektriksel iletkenlik değerleri incelenmiş ve elde edilen veriler ile polimer esaslı iletken kompozit malzemeler için önemli bir parametre olan kritik dolgu oranı (perkolasyon bileşimi) belirlenmiştir. Dinamik mekanik analiz cihazında gerçekleştirilen testlerle ise hazırlanan kompozitlerin modül, faz farkı gibi parametrelerin dolgu türü ve oranına göre değişimi incelenmiştir. Ayrıca, kullanılan dolguların ve bazı kompozitlerin morfolojik özellikleri, taramalı elektron mikroskobundaki (SEM) mikro-yapı incelemeleri ile belirlenmiştir.
Özet (Çeviri)
Investigation of electrical and mechanical properties of cyclo-olefin copolymer (COC) composites reinforced with carbon based fillers In this study, electrical conductivity and mechanical properties of cyclo-olefin copolymer (COC) based composites which were prepared with melt processing method and include various types of carbon fillers, were investigated. Several carbon-based fillers, with different geometry and physical properties, such as carbon black, carbon fiber, graphite and expanded graphite were used. Series of samples including various amounts of fillers were prepared in a lab-scale twin screw extruder and the electrical conductivity values of samples were measured with an impedance analyzer which works with alternative current (AC) and a multimeter that works with direct current (DC). Mechanical and solid-state viscoelastic properties of samples were investigated in a dynamic mechanical analyzer (DMA). The electrical conductivity properties of samples were studied by the conductivity tests depending on the geometry and physical properties of fillers and amount in the composition. Conductivity data were quantified to determine percolation threshold which is a critical physical parameter for the polymer based conductive composites. Variation in mechanical parameters such as modulus, phase angle depending on the geometry and physical properties of fillers and amount in the composition were investigated in detail by the DMA tests. Furthermore, morphological properties of the fillers and some composites were characterized by microstructural investigation in a field emission gun scanning electron microscope (SEM)
Benzer Tezler
- Karbon dolgulu siklo-olefin kopolimer (COC) kompozitlerin reolojik davranışlarının incelenmesi
Investigation on rheological behavior of cyclo-olefin copolymer (COC) composites filled with carbon based fillers
ALPER KAŞGÖZ
Yüksek Lisans
Türkçe
2012
Polimer Bilim ve Teknolojisiİstanbul ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. ALİ DURMUŞ
- Karbon dolgulu sikloolefin kopolimer nanokompozit gaz ayırma membranların hazırlanması
Preparation of cycloolefin copolymer nanocomposite gas seperation membranes filled with carbon-based fillers
MERVE DOĞU
Yüksek Lisans
Türkçe
2015
Kimya Mühendisliğiİstanbul ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. NEVRA ERCAN
- Karbon dolgulu esnek iletken polimer kompozitlerin direnç-gerinim hassasiyetinin ve elektromanyetik dalga kalkanlama özelliklerinin incelenmesi
Investigation of resistivity-strain sensitivity and electromagnetic wave shielding properties of carbon-filled flexible conductor polymer composites
KÜBRA GÜLEŞ
Yüksek Lisans
Türkçe
2024
Polimer Bilim ve TeknolojisiYalova ÜniversitesiPolimer Malzeme Mühendisliği Ana Bilim Dalı
DOÇ. DR. ALPER KAŞGÖZ
- Predictive model development for the thermal conductivity of carbon filled polymer-based mono and hybrid nanocomposites
Karbon dolgulu polimer esaslı mono ve hibrit nanokompozitlerin ısıl iletkenliği için tahmine dayalı model geliştirme
EDA KUMCUOĞLU
Yüksek Lisans
İngilizce
2024
Makine MühendisliğiDokuz Eylül ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. ALPASLAN TURGUT
- Aktif karbon dolgulu sızıntılı akış reaktöründe kükürtdioksidin (SO') giderilmesi
Removal of sulfurdioxide in a trickle bed reactor packed with activated carbon
A.ÜLKÜ ÇOKGÖR (TEKKÖK)
Yüksek Lisans
Türkçe
1997
Kimya MühendisliğiAkdeniz ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
PROF. DR. HÜSEYİN OĞUZ