Geri Dön

Mandibular anterior segmental osteotomilerde osteotomize segmentin değişik miktarlardaki süperior repozisyon simulasyonları sonrasında greftli ya da greftsiz olarak uygulanan farklı fiksasyon konfigürasyonlarının erken dönem etkilerinin biyomekanik açıdan incelenmesi

Biomechanical evaluation of early effects of different fixation configurations applied with or without grafting material after various amounts of superior repositioning of the osteotomized segment in mandibular anterior segmental osteotomies

  1. Tez No: 339585
  2. Yazar: YELİZ KILINÇ
  3. Danışmanlar: PROF. DR. ERKAN ERKMEN
  4. Tez Türü: Doktora
  5. Konular: Diş Hekimliği, Dentistry
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2013
  8. Dil: Türkçe
  9. Üniversite: Gazi Üniversitesi
  10. Enstitü: Sağlık Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Ağız, Diş, Çene Hastalıkları ve Cerrahisi Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 301

Özet

Bu çalışmanın amacı mandibular anterior segmental osteotomiler sonrasında vertikal, horizontal ve oblik anterior oklüzal kuvvetler altında farklı fiksasyon konfigürasyonlarının ve osteotomi boşluğunun rekonstrüksiyonu için kullanılan greft materyalinin mekanik davranışının incelenmesidir. Bu çalışmada kadavra mandibulasının CBCT verilerinden elde edilen üç boyutlu sonlu eleman modellerinde mandibular anterior segmental osteotominin 3 ve 5 mm miktarlardaki süperior repozisyonları simule edilmiştir. Tüm süperior repozisyon modelleri için greftli ve greftsiz olmak üzere iki ayrı model oluşturulmuştur. Osteotomi boşluğu demineralize dondurulmuş kurutulmuş blok kemik allogrefti ile rekostrükte edilmiştir. Greftli ve greftsiz modeller için iki adet sağ ve sol L plak ile iki adet I plaktan oluşan üç farklı fiksasyon konfigürasyonu oluşturulmuştur. Osteotomize segment üzerinde üç yönde çiğneme kuvvetlerini yansıtan anterior oklüzal kuvvetler simule edilmiştir. Von Mises ve asal stres değerleri osteotomize segmentin farklı miktarlardaki süperior repozisyon simulasyonları için hesaplanmıştır. Bu çalışmada sağ L plak konfigürasyonunun diğer fiksasyon yöntemleri ile karşılaştırıldığında en stabil fiksasyonu sağladığı sonucuna varılmıştır. Plaklar ve vidalar üzerindeki en yüksek Von Mises stres değerleri ve kemikler üzerindeki en yüksek asal stres değerleri greftsiz modellerde bulgulanmıştır. Von Mises ve asal stres değerleri 5 mm süperior repozisyonda 3 mm süperior repozisyona göre daha yüksek bulunmuştur. Greft materyali fiksasyonlar ve kemik üzerindeki streslerin azalmasına belirgin oranda katkıda bulunmuştur.

Özet (Çeviri)

The aim of this study was to evaluate the mechanical behavior of different fixation methods and the graft material used for the reconstruction of the osteotomy gap under vertical, horizontal and oblique anterior occlusal loads following mandibular anterior segmental osteotomies. In this study 3 and 5 mm of superior repositioning of mandibular anterior segmental osteotomies were simulated on the 3D finite element models obtained from CBCT data of cadaver mandible. Two distinct models which were either grafted of non-grafted were created for all superior repositioning models. The osteotomy gap was reconstructed with demineralized freze-dried block bone allograft. Three different fixation configurations consisting of two right and left L plates and I plates were created for grafted and non-grafted models. Anterior occlusal forces reflecting chewing forces in three directions were simulated on the osteotomized segment. Von Mises and principal stress values were calculated for simulations of different amounts of superior repositioning of the osteotomized segment. It was concluded that the right L plate configuration provided the most stable fixation compared with other fixation methods used in this study. The highest Von Mises stress values on the plates, screws and principal stress values on the bones were found in non-grafted models compared with grafted models. Von Mises and principle stress values were found to be higher in 5 mm superior repositioning models when compared with 3 mm superior repositioning models. The graft material had a significant contribution for reducing stress values on fixations and bone.

Benzer Tezler

  1. Ortognatik cerrahi uygulanan hastaların retrospektif değerlendirilmesi, komplikasyonların ve iskeletsel relapsların analizi

    Retrospective evaluation of patients who underwent orthognathic surgery,analysis of complications and skeletal relapses

    LÜTFİ TUGAY SEKÜÇOĞLU

    Tıpta Uzmanlık

    Türkçe

    Türkçe

    2006

    Plastik ve Rekonstrüktif CerrahiÇukurova Üniversitesi

    Plastik ve Rekonstrüktif Cerrahi Ana Bilim Dalı

    PROF.DR. SABRİ ACARTÜRK

  2. Üst çenede saat yönünün tersine rotasyon hareketi yapılan ortognatik cerrahilerde farklı kondil boynu açılarının temporomandibular eklemde oluşan stresler üzerine etkisinin sonlu elemanlar analizi ile değerlendirilmesi

    Evaluation of the effect of different condyle neck angles on the stresses in the temporomandibular joint in orthognathic surgeries with counterclockwise rotation of the upper jaw by finite element analysis

    SAMIRA ALIZADA

    Diş Hekimliği Uzmanlık

    Türkçe

    Türkçe

    2023

    Diş HekimliğiBezm-i Alem Vakıf Üniversitesi

    Ağız Diş ve Çene Cerrahisi Ana Bilim Dalı

    PROF. DR. DOĞAN DOLANMAZ

  3. Tooth size and arch parameters affecting maxillary buccal displaced canine

    Maksiller bukkal konumlu kanini etkileyen diş boyutu ve ark parametreleri

    HANEEN H Z HARARA

    Yüksek Lisans

    İngilizce

    İngilizce

    2024

    Diş Hekimliğiİstanbul Yeni Yüzyıl Üniversitesi

    Ortodonti Ana Bilim Dalı

    PROF. DR. MUSTAFA HALUK İŞERİ

  4. Distraksiyon osteogenezesinin bilgisayarda simülasyon yöntemiyle üç boyutlu olarak incelenmesi

    Evaluation of biomechanical analyses of distraction ostegenesis by computerized three-dimensional simulation

    VİLDAN KASAP

    Doktora

    Türkçe

    Türkçe

    2004

    Diş HekimliğiOndokuz Mayıs Üniversitesi

    Ağız, Diş, Çene Hastalıkları ve Cerrahisi Ana Bilim Dalı

    PROF.DR. MELAHAT ÖĞÜTCAN TOLLER

  5. Derin örtülü kapanış olgularının tedavisinde burstone segmental ark tekniği ve ricketts bioprogresiv tedavi tekniği kullanılarak maksiller keser intrüztonunun incelenmesi

    Maxillar incisor intrusion by using burstone segmented arch tecnique and ricketts bioprogressive therapy in the treatment of deep evorbite lases

    BANU ÇAKIRER

    Doktora

    Türkçe

    Türkçe

    1997

    Diş HekimliğiHacettepe Üniversitesi

    Ortodonti Ana Bilim Dalı

    PROF. DR. ASLI ENDER TELLİ