Geri Dön

Farklı kompozisyonlardaki polyesterlerin mekanik özelliklerinin -yapıya bağlı olarak- deneysel ve teorik olarak incelenmesi

Başlık çevirisi mevcut değil.

  1. Tez No: 3561
  2. Yazar: BEHİYE KORKMAZ
  3. Danışmanlar: YRD. DOÇ. DR. SEDAT ÜLKÜ
  4. Tez Türü: Yüksek Lisans
  5. Konular: Makine Mühendisliği, Mechanical Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 1987
  8. Dil: Türkçe
  9. Üniversite: Uludağ Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 110

Özet

Özet yok.

Özet (Çeviri)

ABSTRACT In this study, u>hat kind of changes may occorin the mechanical properties of glass reinforced plastics are investigated. In Chapter 1 u»e briefly dealed *oith differences in general properties of plastic materials in comparison uiith metalic materials. In Chapter 2 the structures of these ma terials,manifac tur ing techniques, varieties and casting tech niques are mentioned. Mechanical properties of polyester resin, twhich is a plastic material, as being matrix material and those of com posite material obtained by using glass strand^at as reinforced material are mentioned theoretically in Chapter 3. In the fourth chapter,u>hich is devoted to experimental studies, by using polyester resin, u»ith is commercial name NEOXILRP 325, and glass uioven and glass- ^strand mat as -.» rein-^ forcing materials me prepared tensile test specimens of dif ferent resin/glass reinforcement ratio. These specimens are subjected to tensile test and their breaking stresses and modulie of elasticity are experimentally determined. Also dynamic modulie of elasticity of these specimens are deter mined by using ultrasonic test methods.. It is concluded that reinforcement of plastics impro ves their mechanical properties as comparable u^ith metals.

Benzer Tezler

  1. Farklı kompozisyonlardaki zararlı kimyasal ortamlara maruz kalan betonlar için uygun çimento seçimi

    The best fit cement selection for concretes that receive destructive chemical mileus in different compositions

    BEDRİ CANER ALPAY

    Yüksek Lisans

    Türkçe

    Türkçe

    2011

    İnşaat MühendisliğiSakarya Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    PROF. DR. KEMALETTİN YILMAZ

  2. Farklı kompozisyonlardaki cad/cam bloklara uygulanan mekanik parlatma ve glaze işlemlerinin renklenme üzerindeki etkisinin değerlendirilmesi

    Evaluation of the effect of polishing and glaze techniques on the color stainability of cad/cam blocks with different microstructures

    DENİZ YILMAZ

    Doktora

    Türkçe

    Türkçe

    2017

    Diş HekimliğiAnkara Üniversitesi

    Protetik Diş Tedavisi Ana Bilim Dalı

    PROF. DR. LALE KARAAĞAÇLIOĞLU

  3. Farklı kompozisyonlardaki borat bileşiklerinden, hidrojen depolama ortamı olarak metal borhidrür üretimi ve üretim mekanizmasının incelenmesi

    Production of metal borohydride as a hydrogen storage medium from borate compounds at different compositon and investigation of production mechanism

    AYSEL KANTÜRK FİGEN

    Doktora

    Türkçe

    Türkçe

    2011

    EnerjiYıldız Teknik Üniversitesi

    Kimya Mühendisliği Ana Bilim Dalı

    PROF. DR. SABRİYE PİŞKİN

  4. Atomik olarak dizayn edilmiş farklı kompozisyonlardaki nano-çubuksu maddelerin sentezlenmesi ve fotoelektrik özelliklerinin incelenmesi

    Synthesis of atomically designed nanorod structures in different compositions and investigation of their photoelectric properties

    ADEM SARILMAZ

    Doktora

    Türkçe

    Türkçe

    2021

    Metalurji MühendisliğiKonya Teknik Üniversitesi

    Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı

    DOÇ. DR. HASAN AKYILDIZ

    DOÇ. DR. FARUK ÖZEL

  5. Farklı kompozisyonlarda üretilen aşınma plakalarının karakterizasyonu ve aşınma özelliklerinin incelenmesi

    Characterization and investigation of wear behaviour of wear plates produced in different compositions

    NİLAY YÜKSEL

    Yüksek Lisans

    Türkçe

    Türkçe

    2012

    Makine MühendisliğiCelal Bayar Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    DOÇ. DR. SALİM ŞAHİN

  6. Farklı kaplama teknikleri kullanılarak cam malzemelere termokromik özellik kazandırılması

    Gaining thermochromic properties to glass materials by using different coating techniques

    LALE CİVAN

    Doktora

    Türkçe

    Türkçe

    2023

    Mühendislik BilimleriEskişehir Teknik Üniversitesi

    Malzeme Bilimi ve Mühendisliği Ana Bilim Dalı

    PROF. DR. SEMRA KURAMA