A study on alumina zircon ceramics as biomaterials
Başlık çevirisi mevcut değil.
- Tez No: 364497
- Danışmanlar: PROF. DR. A. HİKMET ÜÇIŞIK
- Tez Türü: Yüksek Lisans
- Konular: Biyomühendislik, Bioengineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 1995
- Dil: İngilizce
- Üniversite: Boğaziçi Üniversitesi
- Enstitü: Biyo-Medikal Mühendislik Enstitüsü
- Ana Bilim Dalı: Biyomedikal Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 94
Özet
Özet yok.
Özet (Çeviri)
Implant materials are made of polymers, metals, ceramics, and composites. This type of medical materials always contact with cells, tissues, organs and organ systems. Before wide applications, they should be tested in terms of toxicity, carcinogenity, antigenity, and mutagenity. In other words, they must not have any side effects on the biological systems. In this study, varying compositions of (10, 15,20,25,30% Zr02) Alumina-Zircon mixtures were prepared. They were pressed at 350 kg/cm2 in tablet form, in open air and sintered at 1680°C Microhardness tests, X-ray diffraction, chemical analysis, SEM studies and subcutaneous tissue reactions (using rats) were performed. In in-vivo testing of ceramics containing 15, 20 and 30 % zircon, didn't form any foreign body reaction, for two months period of implantation. 20% zircon containing sample has the highest hardness value, about 1600 Vickers hardness number which is less than that of pure alumina. It is found that some compositions of alumina-zircon mixtures are promising in terms of candidate implant material. But more tests should be performed to come in exact conclusion.
Benzer Tezler
- Grafen nano plaka takviyeli alümina-zirkonya kompozitlerinin spark plazma sinterleme yöntemi ile üretimi ve karakterizasyonu
Investigation of microstructure, mechanical properties and cell viability of YSZ toughened alumina composites reinforced with graphene nano plates
DİLAN ALTAN
Yüksek Lisans
Türkçe
2017
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
DOÇ. DR. İPEK AKIN KARADAYI
- Yönlendirilmiş mullit/zirkonya seramiklerinin mekanik özelliklerinin araştırılması
Mechanical properties of mullite/zirconia ceramics
CEM ÖZTÜRK
Yüksek Lisans
Türkçe
2006
Seramik MühendisliğiGebze Yüksek Teknoloji EnstitüsüMalzeme Bilimi ve Mühendisliği Ana Bilim Dalı
Y.DOÇ.DR. YAHYA KEMAL TÜR
- Niğde bölgesindeki kalsitin karıştırmalı bilyalı değirmende yaş öğütülmesi ve bazı işlem parametrelerinin ürün inceliğine etkisi
Wet grinding of Niğde region's calcite in stirred ball mill and effect to the product finess of some operational parameters
DİLER KATIRCIOĞLU
Yüksek Lisans
Türkçe
2010
Maden Mühendisliği ve MadencilikNiğde ÜniversitesiMaden Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. ÖNER YUSUF TORAMAN
- Zirkonya esaslı refrakter kompozitlerin üretim parametrelerinin geliştirilmesi
Improvement of parameters for production of refractory composites based on zirconia
ÇAĞATAY DURMUŞ
Doktora
Türkçe
2015
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. ÖMER SERDAR ÖZGEN
- Bor mineralleri katkılı mullit/zirkonya kompozit üretimi
Synthesis of mullite/zirconia composite materials doped with Boron minerals
HEDİYE AYDIN
Doktora
Türkçe
2013
Seramik MühendisliğiDumlupınar ÜniversitesiSeramik Mühendisliği Ana Bilim Dalı
PROF. DR. REMZİ GÖREN