Mandibulada uygulanan manafokal ,bifokal ve trifokal distraksiyon osteogenezisinin biyomekanik ekiklerinin analizi yöntemi ile araştırması
Bi̇omechanical evaluation of effects of mandibular monofocal, bifocal and trifocal distraction osteogenesis by using finite element analysis method
- Tez No: 375077
- Danışmanlar: PROF. DR. DERVİŞ YILMAZ
- Tez Türü: Doktora
- Konular: Diş Hekimliği, Dentistry
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2012
- Dil: Türkçe
- Üniversite: Gazi Üniversitesi
- Enstitü: Sağlık Bilimleri Enstitüsü
- Ana Bilim Dalı: Ağız, Diş, Çene Hastalıkları ve Cerrahisi Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 132
Özet
Distraksiyon osteogenezi; dereceli olarak uygulanan çekme kuvvetiyle, ayrılan kemik segmentlerinin yüzeyleri arasında yeni kemik formasyonlarının meydana geldiği biyolojik bir olaydır. İskelet doku ve bunu örten yumuşak doku üzerinde gerilim oluşturan çekme kuvveti, distraksiyon vektörüne paralel olarak yeni kemik oluşumunu uyarır. Çalışmamızda değişik tipteki mandibular defeklerin kapatılması amacı ile üç farklı tipte intraoral distraksiyon biyomekanik etkileri ile incelenmiştir. 3 boyutlu tam dişli genç erkek hastalardan alınan mandibula tomografileri kullanılarak MSC MENTAT (MSC Software Corporation, Santa Ana, Ca, Amerika) version 2005 programı yardımıyla model oluşturma işlemleri tamamlanmıştır. The MSC MARC 2005 (MSC Corporation, Santa Ana, CA, 92707, USA) Finite Element Solver yazılımı kullanılmış ayrıca kemik doku ve fiksasyon apareylerinde oluşan stres dağılımları da hesaplanıp şematize edilmiştir. Fiksasyon materyallerinde ve kemik dokularda tespit edilen streslerin karşılaştırılmasında Mega Pascal biriminde Von Mises Stres, Maksimum Principle Stres ve Minimum Principle Stres değerleri kullanılmıştır. Monofokal ve trifokal modellerde streslerin lokalizasyonu itibari ile bakıldığında stresin birinci vidalar ve bu bölgedeki plaklar etrafına toplandığı gözlemlenmiştir, ancak model bifokal modelde bu stres alanlarının bütün vidalar ve etrafındaki plaklarda yaygın olduğu saptanmıştır.
Özet (Çeviri)
Distraction osteogenesis is the biologic process of new bone formation between bone segments that are gradually separated by incremental traction. The traction generates tension on the skeletal and surrounding soft tissue structures, which stimulates new bone formation parallel to the vector of distraction. In our study, three different kind of intraoral mandibular distraction with biomechanical effects examined to treat different types of defects. A 3-dimensional model of a totally dentate mandibular bone of a young man was used as the basis of a mandibular finite element model in this study. The 3D image of the mandible was imported into MSC Mentat (MSC Software Corporation, CA, USA) version 2005 for preprocessing and modeling. The MSC MARC 2005 (MSC Corporation, Santa Ana, CA, 92707, USA) Finite Element Solver software used to calculate the stresses occured on each mandibular model. Stress patterns of the bony tissues anf fixation materials were calculated as well. Von Mises Stress, Maximum Principle Stress and Minimum Principle Stress values in Mega Pascal were used to compare the stresses of the bony tissues and fixation materials. It is revealed that Von Mises Stress, Maximum Tension Stress and Minimum Tension Stresses focused around first screws of plates in both segments in Monofocal and Trifocal distraction. But in Bifocal distraction Von Mises Stress, Maximum Tension Stress and Minimum Tension Stresses focused all screws of plates
Benzer Tezler
- Mandibulada uygulanan cerrahi işlemlerden sonra oluşabilecek duyu bozukluklarının klinik duyu testleri ve trigeminal somatosensoryal uyarılmış potansiyellerin (TSEP) ölçümü ile değerlendirilmesi
Assesment of neurosensory deficite that mayoccur after the surgical procedures of mandible by the clinical neurosensory test and trigeminal somatosensory evoked potential (TSEP) measurement
RAMAZAN KÖYMEN
Doktora
Türkçe
1998
Diş HekimliğiGATAAğız, Diş, Çene Hastalıkları ve Cerrahisi Ana Bilim Dalı
PROF. DR. YILMAZ GÜNAYDIN
- Sınıf III maloklüzyonların tedavisinde mandibulada uygulanan extra alveoler mini vida destekli distalizasyonun dentoalveoler etkilerinin incelenmesi
Evaluation of the dentoalveolar effects of extra alveolar mini screw assisted mandibular arch distalization in class III maloclusions
HASAN ÇINARCIK
- Mandibula sagittal split osteotomisinde osteotomi sırasında osteotomla uygulanan kuvvet vektörünün mediolateral yöndeki açı farkının fragmanlar üzerinde yarattığı stresin sonlu model analizi ile değerlendirilmesi
Evaluation of force vector applied with osteotom during osteotomy in mandibula sagital split osteotomy by finish model analysis of the stress created by the angle difference in the buccolingual direction on the fragments
OĞUZHAN CENGİZ
Diş Hekimliği Uzmanlık
Türkçe
2022
Diş HekimliğiMarmara ÜniversitesiAğız, Diş, Çene Hastalıkları ve Cerrahisi Ana Bilim Dalı
PROF. YAŞAR ÖZKAN
- All-On-4 konsepti ile tedavi edilmiş atrofik mandibulaya gelen travmatik kuvvetlerin sonlu elemanlar analizi ile incelenmesi
Investigation of traumatic forces in atrophic mandible treated with All-On-4 concept by finite element analysis
ESER ÇARPAR
Diş Hekimliği Uzmanlık
Türkçe
2022
Diş Hekimliğiİstanbul ÜniversitesiAğız Diş ve Çene Cerrahisi Ana Bilim Dalı
PROF. DR. BANU GÜRKAN KÖSEOĞLU
- Mandibulanın sagittal split osteotomisinde kullanılan değişik fiksasyon materyallerinin sonlu elemanlar stres analiz metodu ile incelenmesi
Finite element analysis of different screw fixation materials in the sagittal split osteotomy of the mandible
HAKAN AKMAN
Doktora
Türkçe
2002
Diş HekimliğiAnkara ÜniversitesiAğız, Diş, Çene Hastalıkları ve Cerrahisi Ana Bilim Dalı
PROF.DR. ERDAL ERDEM