Application of 3-D hilbert transformation in gravity method
Başlık çevirisi mevcut değil.
- Tez No: 38526
- Danışmanlar: DOÇ.DR. RAHMİ PINAR
- Tez Türü: Yüksek Lisans
- Konular: Jeofizik Mühendisliği, Geophysics Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 1995
- Dil: İngilizce
- Üniversite: Dokuz Eylül Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 79
Özet
Özet yok.
Özet (Çeviri)
ABSTRACT 3-D Hubert Transformation, which can be used to obtained all first and second derivatives of potential of 3-D structure, has been used for theoretical magnetic models. Obtained derivatives of potential can determine boundaries and corners of structure giving rise to the anomaly. Applicability of 3-D Hubert Transformation has been explored here for the gravity method. For this purpose, all derivatives of a sphere model in gravity were calculated analytically from the Newtonian Potential Equation as well as through 3-D Hubert Transformation. Through the comparison of these results, the applicabilty of 3-D Hubert operators in gravity was proved. Then 3-D Hubert Transformation was applied to the theoretical models of vertical dike, inclined dike, infinite horizontal cylinder, finite horizontal cylinder, semi-infinite horizontal sheet and reverse fault in gravity. The vertical derivative of gravitational force (gzz) can be obtained with 3-D Hubert Transformation for gravity models, and this can also derived numerically from the Laplace Differential Equation. Through the comparison of these gzz components, the results were found to be quite similar. Therefore, gzz values can also be derived from 3-D Hubert Transformation besides the procedures of the Laplace Differential Equation which have been used up to now. Additionally, the actual 2-D gravity anomaly map was interpreted using 3-D Hubert Transformation.
Benzer Tezler
- Üç boyutlu karmaşık gradient yönteminin manyetik modellere uygulanması
Application of 3-D komplex gradient method in magnetic models
MEHMET ÖZBEK
Yüksek Lisans
Türkçe
2004
Jeofizik MühendisliğiDokuz Eylül ÜniversitesiJeofizik Mühendisliği Ana Bilim Dalı
PROF.DR. RAHMİ PINAR
- Sayısal işaret işlemci ile V32 modem
V32 modem with digital signal processor
ÖMER DOĞAN
Yüksek Lisans
Türkçe
1992
Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve Kontrolİstanbul Teknik ÜniversitesiDOÇ. DR. MEHMET BÜLENT ÖRENCİK
- Çukur yapıların yüzey sürtünme direncine olan etkilerinin hesaplamalı ve deneysel olarak incelenmesi
Experimental and computational investigation of the effect of dimpled surfaces on skin friction reduction
YASİN KAAN İLTER
Doktora
Türkçe
2023
Gemi Mühendisliğiİstanbul Teknik ÜniversitesiGemi İnşaatı ve Gemi Makineleri Mühendisliği Ana Bilim Dalı
DOÇ. DR. UĞUR ORAL ÜNAL
- Genelleştirme Hilbert dönüşümleri
Generalized Hilbert transforms
ÖZGÜR MARTİN
Yüksek Lisans
Türkçe
2005
Matematikİstanbul Teknik ÜniversitesiMatematik Ana Bilim Dalı
DOÇ. DR. MAHİR HASANOV
- Öteleme operatörlerinin invaryant altuzayları, devirsel vektörleri ve bazı uygulamaları
Başlık çevirisi yok
TOLGA KÜRKÇÜOĞLU
Yüksek Lisans
Türkçe
1998
Matematikİstanbul Teknik ÜniversitesiMatematik Mühendisliği Ana Bilim Dalı
PROF. DR. NAZIM SADIKOV